HylaFAX The world's most advanced open source fax server
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] [Bug 47] RFE: MPSHandlingMethod, EOPHandlingMethod

On Tue,  5 Sep 2000 12:24:03 -0400 (EDT), you wrote:

>+ ------- Additional Comments From dbely@mail.ru  2000-09-05 12:24 -------
>+ 3 tries after "No response to EOP/MPS" during one call? That's impossible.
Yes, as usual you're right :-)
I always confuse RTN with EOP and MPS. Sorry.

However, since I placed the call, here's the log:

cvs 20000903, linux rh61, you've already told me to ignore the spurious
XONXOFF. I get the same with another class1 modem which does not do
weird XONXOFF.

I only know that the remote machine should be an old Olivetti-something.
I get 100% MPS with that machine.

===
Sep 05 18:44:58.31: [28345]: SESSION BEGIN 00000008 39010501238
Sep 05 18:44:58.31: [28345]: SEND FAX: JOB 21 DEST 0,010-501238 COMMID
00000008
Sep 05 18:44:58.31: [28345]: MODEM set DTR OFF
Sep 05 18:44:58.31: [28345]: DELAY 2600 ms
Sep 05 18:45:00.91: [28345]: MODEM set DTR ON
Sep 05 18:45:00.91: [28345]: MODEM set baud rate: 19200 baud, input flow
XON/XOFF, output flow XON/XOFF
Sep 05 18:45:00.91: [28345]: MODEM flush i/o
Sep 05 18:45:00.91: [28345]: <-- [4:ATZ\r]
Sep 05 18:45:01.08: [28345]: --> [2:OK]
Sep 05 18:45:01.08: [28345]: <-- [26:ATE0V1Q0X3S0=0+FCLASS=0H0\r]
Sep 05 18:45:01.39: [28345]: --> [25:ATE0V1Q0X3S0=0+FCLASS=0H0]
Sep 05 18:45:01.39: [28345]: --> [2:OK]
Sep 05 18:45:01.39: [28345]: <-- [21:ATS8=2S7=60&K4&D3&C1\r]
Sep 05 18:45:01.50: [28345]: --> [2:OK]
Sep 05 18:45:01.50: [28345]: <-- [12:AT+FCLASS=1\r]
Sep 05 18:45:01.61: [28345]: --> [2:OK]
Sep 05 18:45:01.61: [28345]: <-- [5:ATM0\r]
Sep 05 18:45:01.71: [28345]: --> [2:OK]
Sep 05 18:45:01.71: [28345]: STATE CHANGE: RUNNING -> SENDING
Sep 05 18:45:01.71: [28345]: MODEM input buffering enabled
Sep 05 18:45:01.71: [28345]: <-- [12:AT+FCLASS=1\r]
Sep 05 18:45:01.93: [28345]: --> [2:OK]
Sep 05 18:45:01.93: [28345]: MODEM set XON/XOFF/FLUSH: input ignored,
output dis
abled
Sep 05 18:45:01.93: [28345]: DIAL 0,010501238
Sep 05 18:45:01.93: [28345]: <-- [17:ATDT0,010501238@\r]
Sep 05 18:45:24.01: [28345]: --> [7:CONNECT]
Sep 05 18:45:24.01: [28345]: MODEM input buffering disabled
Sep 05 18:45:26.92: [28345]: --> HDLC<39:FF C0 04 00 00 8C 00 73 1D 00
E1 B0 BB
00 00 BB BB 00 00 BB BB BB BB BB 00 90 A0 40 18 62 10 B7 C6 0D 07 80 80
06 F4>
Sep 05 18:45:26.92: [28345]: --> [2:OK]
Sep 05 18:45:26.92: [28345]: REMOTE NSF "00 00 31 00 CE B8 00 87 0D DD
00 00 DD
DD 00 00 DD DD DD DD DD 00 09 05 02 18 46 08 ED 63 B0 E0 01 01 60"
Sep 05 18:45:26.92: [28345]: NSF remote fax equipment: unknown
Sep 05 18:45:26.92: [28345]: NSF possible remote station ID: "�����"
Sep 05 18:45:26.92: [28345]: <-- [9:AT+FRH=3\r]
Sep 05 18:45:26.94: [28345]: --> [7:CONNECT]
Sep 05 18:45:26.95: [28345]: --> HDLC<25:FF C0 02 1C CC 4C 8C 0C AC 0C
8C 0C 9C
CC 04 04 04 04 04 04 04 04 04 DF F1>
Sep 05 18:45:26.96: [28345]: --> [2:OK]
Sep 05 18:45:26.96: [28345]: REMOTE CSI "39010501238"
Sep 05 18:45:26.96: [28345]: <-- [9:AT+FRH=3\r]
Sep 05 18:45:26.98: [28345]: --> [7:CONNECT]
Sep 05 18:45:26.98: [28345]: --> HDLC<9:FF C8 01 00 73 1D 00 46 14>
Sep 05 18:45:26.99: [28345]: --> [2:OK]
Sep 05 18:45:26.99: [28345]: REMOTE best rate 9600 bit/s
Sep 05 18:45:26.99: [28345]: REMOTE max page width 1728 pixels in 215 mm
Sep 05 18:45:26.99: [28345]: REMOTE max unlimited page length
Sep 05 18:45:26.99: [28345]: REMOTE best vres 7.7 line/mm
Sep 05 18:45:26.99: [28345]: REMOTE best format 2-D MR
Sep 05 18:45:26.99: [28345]: REMOTE best 20 ms, 10 ms/scanline
Sep 05 18:45:26.99: [28345]: USE 9600 bit/s
Sep 05 18:45:26.99: [28345]: USE 20 ms, 10 ms/scanline
Sep 05 18:45:26.99: [28345]: SEND file "docq/doc21.ps;01"
Sep 05 18:45:26.99: [28345]: USE page width 1728 pixels in 215 mm
Sep 05 18:45:26.99: [28345]: USE unlimited page length
Sep 05 18:45:26.99: [28345]: USE 7.7 line/mm
Sep 05 18:45:26.99: [28345]: USE 1-D MR
Sep 05 18:45:26.99: [28345]: SEND training at v.29 9600 bit/s
Sep 05 18:45:26.99: [28345]: <-- [9:AT+FTH=3\r]
Sep 05 18:45:27.04: [28345]: --> [7:CONNECT]
Sep 05 18:45:27.04: [28345]: <-- HDLC<23:FF C0 C2 8C 8C 8C 8C 8C 04 0C
0C 0C 04
9C CC D4 04 04 04 04 04 04 04>
Sep 05 18:45:27.04: [28345]: <-- data [23]
Sep 05 18:45:27.04: [28345]: <-- data [2]
Sep 05 18:45:27.06: [28345]: --> [1:^Q]
Sep 05 18:45:27.07: [28345]: --> [7:CONNECT]
Sep 05 18:45:27.07: [28345]: <-- HDLC<6:FF C8 C1 00 62 10>
Sep 05 18:45:27.07: [28345]: <-- data [6]
Sep 05 18:45:27.07: [28345]: <-- data [2]
Sep 05 18:45:29.24: [28345]: --> [2:OK]
Sep 05 18:45:29.24: [28345]: DELAY 75 ms
Sep 05 18:45:29.32: [28345]: MODEM set XON/XOFF/FLUSH: input
interpreted, output disabled
Sep 05 18:45:29.32: [28345]: <-- [10:AT+FTM=96\r]
Sep 05 18:45:29.65: [28345]: --> [7:CONNECT]
Sep 05 18:45:29.65: [28345]: <-- data [1024]
Sep 05 18:45:29.65: [28345]: <-- data [776]
Sep 05 18:45:29.65: [28345]: <-- data [2]
Sep 05 18:45:31.20: [28345]: --> [2:OK]
Sep 05 18:45:31.20: [28345]: MODEM set XON/XOFF/DRAIN: input ignored,
output disabled
Sep 05 18:45:31.20: [28345]: <-- [9:AT+FRH=3\r]
Sep 05 18:45:31.35: [28345]: --> [7:CONNECT]
Sep 05 18:45:32.47: [28345]: --> HDLC<5:FF C8 21 57 BE>
Sep 05 18:45:32.49: [28345]: --> [2:OK]
Sep 05 18:45:32.49: [28345]: TRAINING succeeded
Sep 05 18:45:32.49: [28345]: <-- [10:AT+FTM=96\r]
Sep 05 18:45:32.89: [28345]: --> [1:^S]
Sep 05 18:45:32.90: [28345]: --> [7:CONNECT]
Sep 05 18:45:32.90: [28345]: SEND begin page
Sep 05 18:45:32.90: [28345]: MODEM set XON/XOFF/FLUSH: input
interpreted, output disabled
Sep 05 18:45:32.90: [28345]: <-- data [1028]
Sep 05 18:45:32.90: [28345]: <-- data [1024]
Sep 05 18:45:32.90: [28345]: <-- data [1027]
Sep 05 18:45:32.90: [28345]: <-- data [167]
Sep 05 18:45:32.90: [28345]: SENT 3239 bytes of data
Sep 05 18:45:32.90: [28345]: SEND 1D RTC
Sep 05 18:45:32.90: [28345]: <-- data [29]
Sep 05 18:45:32.90: [28345]: <-- data [2]
Sep 05 18:45:32.90: [28345]: SEND end page
Sep 05 18:45:35.91: [28345]: --> [2:OK]
Sep 05 18:45:35.91: [28345]: MODEM set XON/XOFF/DRAIN: input ignored,
output disabled
Sep 05 18:45:35.91: [28345]: DELAY 95 ms
Sep 05 18:45:36.01: [28345]: SEND send EOP (no more pages or documents)
Sep 05 18:45:36.01: [28345]: <-- [9:AT+FTH=3\r]
Sep 05 18:45:36.06: [28345]: --> [7:CONNECT]
Sep 05 18:45:36.06: [28345]: <-- HDLC<3:FF C8 F4>
Sep 05 18:45:36.06: [28345]: <-- data [3]
Sep 05 18:45:36.06: [28345]: <-- data [2]
Sep 05 18:45:37.38: [28345]: --> [1:^Q]
Sep 05 18:45:37.38: [28345]: --> [2:OK]
Sep 05 18:45:37.38: [28345]: <-- [9:AT+FRH=3\r]
Sep 05 18:45:40.48: [28345]: --> [0:]
Sep 05 18:45:40.48: [28345]: MODEM <Empty line>
Sep 05 18:45:40.48: [28345]: MODEM TIMEOUT: waiting for v.21 carrier
Sep 05 18:45:40.48: [28345]: <-- data [1]
Sep 05 18:45:40.68: [28345]: MODEM TIMEOUT: reading line from modem
Sep 05 18:45:40.68: [28345]: MODEM <Timeout>
Sep 05 18:45:40.68: [28345]: SEND send EOP (no more pages or documents)
Sep 05 18:45:40.68: [28345]: <-- [9:AT+FTH=3\r]
Sep 05 18:45:40.73: [28345]: --> [7:CONNECT]
Sep 05 18:45:40.73: [28345]: <-- HDLC<3:FF C8 F4>
Sep 05 18:45:40.73: [28345]: <-- data [3]
Sep 05 18:45:40.73: [28345]: <-- data [2]
Sep 05 18:45:42.05: [28345]: --> [1:^Q]
Sep 05 18:45:42.05: [28345]: --> [2:OK]
Sep 05 18:45:42.05: [28345]: <-- [9:AT+FRH=3\r]
Sep 05 18:45:45.15: [28345]: --> [0:]
Sep 05 18:45:45.15: [28345]: MODEM <Empty line>
Sep 05 18:45:45.15: [28345]: MODEM TIMEOUT: waiting for v.21 carrier
Sep 05 18:45:45.15: [28345]: <-- data [1]
Sep 05 18:45:45.35: [28345]: MODEM TIMEOUT: reading line from modem
Sep 05 18:45:45.35: [28345]: MODEM <Timeout>
Sep 05 18:45:45.35: [28345]: SEND send EOP (no more pages or documents)
Sep 05 18:45:45.35: [28345]: <-- [9:AT+FTH=3\r]
Sep 05 18:45:45.40: [28345]: --> [7:CONNECT]
Sep 05 18:45:45.40: [28345]: <-- HDLC<3:FF C8 F4>
Sep 05 18:45:45.40: [28345]: <-- data [3]
Sep 05 18:45:45.40: [28345]: <-- data [2]
Sep 05 18:45:46.72: [28345]: --> [1:^Q]
Sep 05 18:45:46.72: [28345]: --> [2:OK]
Sep 05 18:45:46.72: [28345]: <-- [9:AT+FRH=3\r]
Sep 05 18:45:49.82: [28345]: --> [0:]
Sep 05 18:45:49.82: [28345]: MODEM <Empty line>
Sep 05 18:45:49.82: [28345]: MODEM TIMEOUT: waiting for v.21 carrier
Sep 05 18:45:49.82: [28345]: <-- data [1]
Sep 05 18:45:50.02: [28345]: MODEM TIMEOUT: reading line from modem
Sep 05 18:45:50.02: [28345]: MODEM <Timeout>
Sep 05 18:45:50.02: [28345]: No response to MPS or EOP repeated 3 tries
Sep 05 18:45:50.02: [28345]: <-- [9:AT+FTH=3\r]
Sep 05 18:45:50.07: [28345]: --> [7:CONNECT]
Sep 05 18:45:50.07: [28345]: <-- HDLC<3:FF C8 DF>
Sep 05 18:45:50.07: [28345]: <-- data [3]
Sep 05 18:45:50.07: [28345]: <-- data [2]
Sep 05 18:45:51.39: [28345]: --> [1:^Q]
Sep 05 18:45:51.39: [28345]: --> [2:OK]
Sep 05 18:45:51.39: [28345]: MODEM input buffering enabled
Sep 05 18:45:51.39: [28345]: <-- [14:AT+FCLASS=0H0\r]
Sep 05 18:45:51.82: [28345]: --> [10:NO CARRIER]
Sep 05 18:45:51.82: [28345]: MODEM No carrier
Sep 05 18:45:51.82: [28345]: MODEM set DTR OFF
Sep 05 18:45:51.82: [28345]: STATE CHANGE: SENDING -> MODEMWAIT (timeout
5)
Sep 05 18:45:51.82: [28345]: SESSION END
===


-- 
giulioo@pobox.com


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

Project hosted by iFAX Solutions