HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] ps2fax does not work



Hi,
i would intepret the output as follows:
the rendering of the first page of the fax went all ok,
because you get the line
>>showpage, press <return> to continue<<
which is output from gs in interactive mode to 
give the time to watch the produced image.
after the first page i would guess there is some garbage not 
covered by the postscript-standard included in the file,
and this confuses gs, but not GSView.

How was the ps-file created?
Christoph
LAZAR Imre schrieb:
> 
> ----- Original Message -----
> From: Christoph Scheeder <christoph.scheeder@scheeder.de>
> To: LAZAR Imre <imre@transorg.hu>
> Cc: hylafax <hylafax-users@hylafax.org>
> Sent: Tuesday, September 05, 2000 2:14 PM
> Subject: Re: [hylafax-users] ps2fax does not work
> 
> > Hi,
> >
> > then use
> > gs -sDEVICE=faxg3 -sOutputFile=/dev/zero /var/spool/fax/docq/doc24.ps.48
> > to get the correct errors from gs.
> > Christoph
> 
> The output is the same, what I wrote first:
> What does it mean, systax error error in -file-.
> I can open the file in GSView.
> 
> hilary:/var/spool/fax/docq# gs -sDEVICE=faxg3 -sOutPutFile=/dev/zero
> ./doc24.ps.48
> GNU Ghostscript 5.50 (2000-2-13)
> Copyright (C) 1998 Aladdin Enterprises, Menlo Park, CA.  All rights
> reserved.
> This software comes with NO WARRANTY: see the file COPYING for details.
> >>showpage, press <return> to continue<<
> 
> Error: /syntaxerror in -file-
> Operand stack:
> 
> Execution stack:
>    %interp_exit
> .runexec2   --nostringval--   --nostringval--   --nostringval--   2
> %stopped_push   --nostringval--   2   3
> %oparray_pop   --nostringval--   --nostringval--   false   1   %stopped_push
> 1   3   %oparray_pop
> .runexec2   --nostringval--   --nostringval--   --nostringval--   2
> %stopped_push   --nostringval--   --nostringval--
> Dictionary stack:
>    --dict:905/941(G)--   --dict:0/20(G)--   --dict:51/200(L)--   --dict:37/1
> 00(L)--
> Current allocation mode is local
> Current file position is 157667
> GS>help
> Enter PostScript commands.  '(filename) run' runs a file, 'quit' exits.
> GS>quit
> hilary:/var/spool/fax/docq#
> 
> Imre.
> 
> imre@transorg.hu      ilazar@sms.pgsm.hu


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions