Re: [hylafax-users] DTE to DCE Data Underflow

[Dmitry Bely <dbely@mail.ru>]

Andreas Grimmel <grimmel@additive-net.de> writes:

> Hi Jay,
> first of all: Thanks for your fast (and making-me-laugh-on-a-F$§"%-day) response
> ;-)
> ...Ignoring the fact that now it's obvious I am totally dumb *hihi* I just give
> you a few logs, two where sending has failed and one where it worked really fine.
> Hope it helps, and anyway: thanks a lot.
> 
> Andreas

First of all Andreas, excuse me for the first wrong comments. I had just
confused the logs ... :-(

> By the way: How's the weather down there? Just trying to enjoy the end of a
> disappointing summer right here :-)
> 
> **********************************************************************************************************
> 
> Aug 02 18:01:17.44: [16869]: SESSION BEGIN 00000007 496172590586

Can you repost the log with SessionTracing = 0xFFF? 

> Aug 02 18:01:17.44: [16869]: SEND FAX: JOB 8 DEST 590586 COMMID 00000007
> Aug 02 18:01:17.44: [16869]: DELAY 2600 ms
> Aug 02 18:01:20.04: [16869]: <-- [15:ATE0V1Q0S0=0H0\r]
> Aug 02 18:01:20.07: [16869]: --> [2:OK]
> Aug 02 18:01:20.07: [16869]: <-- [12:ATS8=2S7=60\r]
> Aug 02 18:01:20.09: [16869]: --> [2:OK]
> Aug 02 18:01:20.09: [16869]: <-- [14:AT+FCLASS=2.0\r]
> Aug 02 18:01:20.12: [16869]: --> [2:OK]
> Aug 02 18:01:20.12: [16869]: <-- [9:AT+FLO=0\r]
> Aug 02 18:01:20.14: [16869]: --> [2:OK]
> Aug 02 18:01:20.14: [16869]: <-- [9:AT+FPP=0\r]
> Aug 02 18:01:20.16: [16869]: --> [2:OK]
> Aug 02 18:01:20.16: [16869]: <-- [9:AT+FBO=0\r]
> Aug 02 18:01:20.18: [16869]: --> [2:OK]
> Aug 02 18:01:20.18: [16869]: <-- [10:AT+FCT=30\r]
> Aug 02 18:01:20.20: [16869]: --> [2:OK]
> Aug 02 18:01:20.20: [16869]: <-- [15:AT+FNR=1,1,1,1\r]
> Aug 02 18:01:20.22: [16869]: --> [2:OK]
> Aug 02 18:01:20.22: [16869]: <-- [9:AT+FIE=0\r]
> Aug 02 18:01:20.24: [16869]: --> [2:OK]
> Aug 02 18:01:20.24: [16869]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Aug 02 18:01:20.27: [16869]: --> [2:OK]
> Aug 02 18:01:20.27: [16869]: <-- [7:ATL1M1\r]
> Aug 02 18:01:20.29: [16869]: --> [2:OK]
> Aug 02 18:01:20.29: [16869]: <-- [14:AT+FCLASS=2.0\r]
> Aug 02 18:01:20.41: [16869]: --> [2:OK]
> Aug 02 18:01:20.41: [16869]: <-- [9:AT+FLO=0\r]
> Aug 02 18:01:20.53: [16869]: --> [2:OK]
> Aug 02 18:01:20.53: [16869]: <-- [9:AT+FPP=0\r]
> Aug 02 18:01:20.65: [16869]: --> [2:OK]
> Aug 02 18:01:20.65: [16869]: <-- [9:AT+FBO=0\r]
> Aug 02 18:01:20.77: [16869]: --> [2:OK]
> Aug 02 18:01:20.77: [16869]: <-- [10:AT+FCT=30\r]
> Aug 02 18:01:20.89: [16869]: --> [2:OK]
> Aug 02 18:01:20.89: [16869]: <-- [15:AT+FNR=1,1,1,1\r]
> Aug 02 18:01:21.01: [16869]: --> [2:OK]
> Aug 02 18:01:21.01: [16869]: <-- [9:AT+FIE=0\r]
> Aug 02 18:01:21.13: [16869]: --> [2:OK]
> Aug 02 18:01:21.13: [16869]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Aug 02 18:01:21.26: [16869]: --> [2:OK]
> Aug 02 18:01:21.26: [16869]: <-- [23:AT+FLI="ADDITIVE GmbH"\r]
> Aug 02 18:01:21.38: [16869]: --> [2:OK]
> Aug 02 18:01:21.38: [16869]: DIAL 590586
> Aug 02 18:01:21.38: [16869]: <-- [14:ATDT0W590586@\r]
> Aug 02 18:01:44.59: [16869]: --> [4:+FCO]
> Aug 02 18:01:47.60: [16869]: --> [35:+FNF: 0000 0909 6464 A1A1 1818 0000]
> Aug 02 18:01:47.60: [16869]: REMOTE NSF " 0000 0909 6464 A1A1 1818 0000"
> Aug 02 18:01:47.74: [16869]: --> [100:+FNF: 0000 0000 0909 0202 0A0A 0000 0000
> 4949 F6F6 1717 2F2F 7777 6161 3F3F FFFF FFFF FFFF FFFF FFFF]
> Aug 02 18:01:47.74: [16869]: REMOTE NSF " 0000 0000 0909 0202 0A0A 0000 0000 4949
> F6F6 1717 2F2F 7777 6161 3F3F FFFF FFFF FFFF FFFF FFFF"
> Aug 02 18:01:47.74: [16869]: --> [27:+FCI:"       49 6172 77613"]
> Aug 02 18:01:47.74: [16869]: REMOTE CSI "49 6172 77613"
> Aug 02 18:01:47.74: [16869]: --> [20:+FIS:1,3,0,2,1,0,0,4]
> Aug 02 18:01:47.74: [16869]: --> [2:OK]
> Aug 02 18:01:47.74: [16869]: REMOTE best rate 9600 bit/s
> Aug 02 18:01:47.74: [16869]: REMOTE max page width 1728 pixels in 215 mm
> Aug 02 18:01:47.74: [16869]: REMOTE max unlimited page length
> Aug 02 18:01:47.74: [16869]: REMOTE best vres 7.7 line/mm
> Aug 02 18:01:47.74: [16869]: REMOTE best format 2-D MR
> Aug 02 18:01:47.74: [16869]: REMOTE best 20 ms, 10 ms/scanline
> Aug 02 18:01:47.74: [16869]: USE 9600 bit/s
> Aug 02 18:01:47.74: [16869]: USE 20 ms, 10 ms/scanline
> Aug 02 18:01:47.74: [16869]: SEND file "docq/doc8.ps;00"
> Aug 02 18:01:47.74: [16869]: USE page width 1728 pixels in 215 mm
> Aug 02 18:01:47.74: [16869]: USE unlimited page length
> Aug 02 18:01:47.74: [16869]: USE 3.85 line/mm
> Aug 02 18:01:47.74: [16869]: USE 1-D MR
> Aug 02 18:01:47.74: [16869]: <-- [23:AT+FIS=0,3,0,2,0,0,0,4\r]
> Aug 02 18:01:47.87: [16869]: --> [2:OK]
> Aug 02 18:01:47.87: [16869]: <-- [7:AT+FDT\r]
> Aug 02 18:01:53.67: [16869]: --> [20:+FCS:0,3,0,2,0,0,0,5]
> Aug 02 18:01:53.97: [16869]: --> [7:CONNECT]
> Aug 02 18:01:53.97: [16869]: SEND begin page
> Aug 02 18:01:53.97: [16869]: <-- data [1026]
> Aug 02 18:01:53.97: [16869]: <-- data [1027]
> Aug 02 18:01:53.97: [16869]: <-- data [1026]
> Aug 02 18:01:53.97: [16869]: <-- data [1030]
> Aug 02 18:01:53.97: [16869]: <-- data [1027]
> Aug 02 18:01:55.96: [16869]: <-- data [1027]
> Aug 02 18:01:55.96: [16869]: <-- data [1029]
> Aug 02 18:01:55.96: [16869]: <-- data [1033]
> Aug 02 18:01:57.96: [16869]: <-- data [1026]
> Aug 02 18:01:57.96: [16869]: <-- data [1026]
> Aug 02 18:01:57.96: [16869]: <-- data [1026]
> Aug 02 18:01:57.96: [16869]: <-- data [1025]
> Aug 02 18:01:59.96: [16869]: <-- data [1028]
> Aug 02 18:01:59.96: [16869]: <-- data [1027]
> Aug 02 18:01:59.96: [16869]: <-- data [1026]
> Aug 02 18:01:59.96: [16869]: <-- data [1027]
> Aug 02 18:02:01.95: [16869]: <-- data [1027]
> Aug 02 18:02:01.95: [16869]: <-- data [1027]
> Aug 02 18:02:01.95: [16869]: <-- data [1029]
> Aug 02 18:02:03.95: [16869]: <-- data [1030]
> Aug 02 18:02:03.95: [16869]: <-- data [1029]
> Aug 02 18:02:03.95: [16869]: <-- data [1027]
> Aug 02 18:02:03.95: [16869]: <-- data [1035]
> Aug 02 18:02:05.95: [16869]: <-- data [1025]
> Aug 02 18:02:05.95: [16869]: <-- data [1027]
> Aug 02 18:02:05.95: [16869]: <-- data [1029]
> Aug 02 18:02:05.95: [16869]: <-- data [629]
> Aug 02 18:02:07.94: [16869]: SENT 27253 bytes of data
> Aug 02 18:02:07.94: [16869]: SEND 1D RTC
> Aug 02 18:02:07.94: [16869]: <-- data [9]
> Aug 02 18:02:07.94: [16869]: SEND end page
> Aug 02 18:02:07.94: [16869]: SEND send MPS (more pages, same document)
> Aug 02 18:02:07.94: [16869]: <-- data [2]
> Aug 02 18:02:58.24: [16869]: --> [7:+FHS:43]
> Aug 02 18:02:58.24: [16869]: REMOTE HANGUP: DTE to DCE data underflow (code 43)

Can you try build Hylafax from CVS? Your version contain a bug -- it
violates fax protocol and sends RTC (bit sequence, indicating end of
the page) multiple times. With some fax machines this leads to RTN failure, but
maybe it can also lead to the underflow error for some modem/remote fax
machine combination? Also check if the flow control is setup properly.

> Aug 02 18:02:58.24: [16869]: <-- [5:ATH0\r]
> Aug 02 18:02:58.72: [16869]: --> [2:OK]
> Aug 02 18:02:58.72: [16869]: SESSION END

Hope to hear from you soon,
Dmitry




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null