[hylafax-users] SEND FAILED: Ring detect without successful handshake

["Brendin Emslie" <brendin@dreamland.ab.ca>]

I searched the mailing list and couldn't find this error occuring when
someone was sending... any ideas?

Receiving the following error when sending...

Aug 27 20:34:25 faxserver1 FaxSend[1628]: SEND FAILED: Ring detect without
successful handshake

Whats actually happening is that a human is answering the phone.

Modem is a PCI-RAS chaser 8 card with rockwell chipset.

config file in use...

# Uncomment to Reserve ttyCH2 for incoming only
#ModemGroup:            "any: ttyCH[0,1,3]"

#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2          # use class 2 interface
ModemRate:              19200
#ModemFlowControl:      rtscts          # default
ModemFlowControl:       xonxoff          # default

#
#ModemResetCmds:        AT&F2           # what you want for a Supra
ModemNoFlowCmd:         AT&K            # disable flow control cmd
ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
ModemSoftFlowCmd:       AT&K4           # software flow control cmd
ModemSetupDTRCmd:       AT&D3           # DTR off causes modem to reset
#ModemSetupDTRCmd:      AT&D2S25=1S38=0 # Dynalink 1414VE needs this
ModemSetupDCDCmd:       AT&C1           # DCD follows carrier
ModemSetupAACmd:        AT+FAA=1+FCLASS=0 # enable in current class
#
ModemSendFillOrder:     LSB2MSB         # as expected
ModemRecvFillOrder:     MSB2LSB         # opposite of what makes sense
#
ModemAnswerFaxBeginCmd: "<19200><xon>"  # modem switches on fax receive
#
# Caller ID configuration setup for Supra.
#
#QualifyCID:            etc/cid         # CID access control list file
#CIDNumber:             "NMBR = "       # pattern string for phone number
info
#CIDName:               "NAME = "       # pattern string for identity info






____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null