[hylafax-users] software generated faxes with 1-D MR format are empty

[Marcus Schopen <schoppa@jurbarton1.uni-bielefeld.de>]

Hi there,

all recieved faxes generated by a software fax (e.g. WinFax, hylafax itself) are empty.  Typical for these faxes are that the remote fax wants 1-D MR format. All faxes form "physical" are ok.

I'm using a Zyxel Elite 2864ID ISDN upgraded (MODEM ZYXEL E2864/V 3.00a) with newst hylafax patch from SuSE 6.4.

Thanks
Marcus

example of an recieved empty fax sent by another hylafax with the same (see above) modem:

Aug 26 18:14:11.07: [  706]: SESSION BEGIN 00000041 4952323423
Aug 26 18:14:11.09: [  706]: <-- [4:ATA\r]
Aug 26 18:14:11.09: [  706]: --> [24:FM:2151309472 TO:9824772]
Aug 26 18:14:22.22: [  706]: --> [4:+FCO]
Aug 26 18:14:22.22: [  706]: ANSWER: FAX CONNECTION
Aug 26 18:14:22.22: [  706]: RECV FAX: begin
Aug 26 18:14:26.17: [  706]: --> [28:+FTI:"FRITZ & PARTNER     " ]
Aug 26 18:14:26.17: [  706]: REMOTE TSI "FRITZ & PARTNER"
Aug 26 18:14:26.17: [  706]: --> [20:+FCS:1,5,0,2,0,0,0,0]
Aug 26 18:14:26.17: [  706]: REMOTE wants 14400 bit/s
Aug 26 18:14:26.17: [  706]: REMOTE wants page width 1728 pixels in 215 mm
Aug 26 18:14:26.17: [  706]: REMOTE wants unlimited page length
Aug 26 18:14:26.17: [  706]: REMOTE wants 7.7 line/mm
Aug 26 18:14:26.17: [  706]: REMOTE wants 1-D MR
Aug 26 18:14:26.17: [  706]: --> [2:OK]
Aug 26 18:14:26.17: [  706]: <-- [7:AT+FDR\r]
Aug 26 18:14:27.72: [  706]: --> [20:+FCS:1,5,0,2,0,0,0,0]
Aug 26 18:14:27.72: [  706]: REMOTE wants 14400 bit/s
Aug 26 18:14:27.72: [  706]: REMOTE wants page width 1728 pixels in 215 mm
Aug 26 18:14:27.72: [  706]: REMOTE wants unlimited page length
Aug 26 18:14:27.72: [  706]: REMOTE wants 7.7 line/mm
Aug 26 18:14:27.72: [  706]: REMOTE wants 1-D MR
Aug 26 18:14:28.31: [  706]: --> [7:CONNECT]
Aug 26 18:14:28.31: [  706]: RECV: begin page
Aug 26 18:14:28.31: [  706]: RECV: send trigger 022
Aug 26 18:14:28.31: [  706]: <-- data [1]
Aug 26 18:14:41.98: [  706]: RECV: 316 bytes of data, 14 total lines
Aug 26 18:14:41.98: [  706]: --> [16:+FPS:1,8F5,1,0,0]
Aug 26 18:14:43.32: [  706]: --> [6:+FET:2]
Aug 26 18:14:43.32: [  706]: RECV recv EOP (no more pages or documents)
Aug 26 18:14:43.32: [  706]: --> [2:OK]
Aug 26 18:14:43.32: [  706]: RECV send MCF (message confirmation)
Aug 26 18:14:43.32: [  706]: RECV FAX (00000041): from FRITZ & PARTNER, page 1 in 0:17, INF, 7.7 line/mm, 1-D MR
Aug 26 18:14:43.32: [  706]: RECV FAX (00000041): recvq/fax00017.tif from FRITZ & PARTNER, route to <unspecified>, 1 pages in
0:21
Aug 26 18:14:43.35: [  706]: <-- [7:AT+FDR\r]
Aug 26 18:14:46.18: [  706]: --> [7:+FHS:00]
Aug 26 18:14:46.18: [  706]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Aug 26 18:14:46.18: [  706]: RECV FAX: bin/faxrcvd "recvq/fax00017.tif" "ttyS0" "00000041" ""
Aug 26 18:14:47.17: [  706]: RECV FAX: end
Aug 26 18:14:47.17: [  706]: SESSION END




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null