Re: [hylafax-users] any body can help ?

[Dmitry Bely <dbely@mail.ru>]

"Sobari Tanuwijaya" <sobari@cheerful.com> writes:

> Hello,
> I just installed Hylafax in my system ( I'm using Linux RH 6.0 )
> Until now I cannot send any outbound fax, but inbound can be 
> received.
> Everytime I try to send fax this error is occured
> 
> I'm using Courier I modem and using ISDN line.
> 
> our facsimile job to 6031855 was not sent because:
>     Unknown problem (check modem power)
> 
> The job will be retried at 13:17.
> 
>     ---- Transcript of session follows ----
> 
> Aug 27 13:10:14.58: [14207]: SESSION BEGIN 00000007 
> 62226031855
> Aug 27 13:10:14.58: [14207]: SEND FAX: JOB 1 DEST 6031855 
> COMMID 00000007
> Aug 27 13:10:14.58: [14207]: DELAY 2600 ms
> Aug 27 13:10:17.17: [14207]: <-- [4:ATZ\r]
> Aug 27 13:10:22.17: [14207]: MODEM <Timeout>
> Aug 27 13:10:22.17: [14207]: <-- [5:ATM0\r]
> Aug 27 13:10:22.34: [14207]: --> [4:ATM0]
> Aug 27 13:10:22.34: [14207]: --> [2:OK]
> Aug 27 13:10:22.34: [14207]: <-- [14:AT+FCLASS=2.0\r]
> Aug 27 13:10:22.49: [14207]: --> [13:AT+FCLASS=2.0]
> Aug 27 13:10:22.49: [14207]: --> [2:OK]
> Aug 27 13:10:22.49: [14207]: <-- [9:AT+FLO=2\r]
> Aug 27 13:10:22.64: [14207]: --> [8:AT+FLO=2]
> Aug 27 13:10:22.64: [14207]: --> [2:OK]
> Aug 27 13:10:22.64: [14207]: <-- [9:AT+FPP=0\r]
> Aug 27 13:10:22.79: [14207]: --> [8:AT+FPP=0]
> Aug 27 13:10:22.79: [14207]: --> [2:OK]
> Aug 27 13:10:22.79: [14207]: <-- [9:AT+FBO=0\r]
> Aug 27 13:10:22.94: [14207]: --> [8:AT+FBO=0]
> Aug 27 13:10:22.94: [14207]: --> [2:OK]
> Aug 27 13:10:22.94: [14207]: <-- [10:AT+FCT=30\r]
> Aug 27 13:10:23.09: [14207]: --> [9:AT+FCT=30]
> Aug 27 13:10:23.09: [14207]: --> [2:OK]
> Aug 27 13:10:23.09: [14207]: <-- [15:AT+FNR=1,1,1,0\r]
> Aug 27 13:10:23.24: [14207]: --> [14:AT+FNR=1,1,1,0]
> Aug 27 13:10:23.24: [14207]: --> [2:OK]
> Aug 27 13:10:23.24: [14207]: <-- [9:AT+FIE=0\r]
> Aug 27 13:10:23.39: [14207]: --> [8:AT+FIE=0]
> Aug 27 13:10:23.39: [14207]: --> [2:OK]
> Aug 27 13:10:23.39: [14207]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Aug 27 13:10:23.54: [14207]: --> [22:AT+FCC=1,5,2,2,0,0,0,0]
> Aug 27 13:10:23.54: [14207]: --> [2:OK]
> Aug 27 13:10:23.54: [14207]: <-- [28:AT+FLI="JTSoft 
> Db.App.Dev."\r]
> Aug 27 13:10:23.69: [14207]: --> [27:AT+FLI="JTSoft Db.App.Dev."]
> Aug 27 13:10:23.69: [14207]: --> [2:OK]
> Aug 27 13:10:23.70: [14207]: DIAL 6031855
> Aug 27 13:10:23.70: [14207]: <-- [12:ATDT6031855\r]
> Aug 27 13:10:33.29: [14207]: --> [11:ATDT6031855]
> Aug 27 13:10:33.29: [14207]: SEND FAILED: Unknown problem 
> (check modem power)
> Aug 27 13:10:33.29: [14207]: <-- [5:ATH0\r]
> Aug 27 13:10:33.29: [14207]: --> [4:+FCO]
> Aug 27 13:10:35.04: [14207]: --> [7:+FHS:02]
> Aug 27 13:10:35.04: [14207]: REMOTE HANGUP: Call aborted,  
> from +FK or <CAN> (code 2)
> Aug 27 13:10:35.04: [14207]: --> [2:OK]
> Aug 27 13:10:35.04: [14207]: SESSION END

Your modem does not properly respond to ATZ. That is possibly due to
abnormal NVRAM settings. Try to restore the factory defaults via

AT&F&W

or something like that in any terminal software (minicom etc.)

Hope to hear from you soon,
Dmitry




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null