![]() |
Hi, I had that problem with my MultiTech MT3334ZDX. It ended up that the ModemRecvFillOrder line was wrong. Here are the setting that are working for me: ModemRecvFillOrder: MSB2LSB # bit order of received facsimile ModemSendFillOrder: LSB2MSB # bit order modem expects for transmit It seems kindof backwards, but it works fine. Any other setting, I get black lines when I receive. Good Luck! ------------------------------- Jason Bachman Information Systems Manager Hiestand Supply Company jabachman@hiestandsupply.com -----Original Message----- From: hylafax-users-bounce@hylafax.org [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of darrellb Sent: Monday, August 14, 2000 10:31 AM To: hylafax-users@hylafax.org Subject: Re: [hylafax-users] multitech MT5600ZDXE/hylafax 4.0pl2 "Jay R. Ashworth" wrote: > > On Sunday, August 13, 2000, at 8:48:43 PM, Damian Ivereigh wrote: > > "Jay R. Ashworth" wrote: > >> We're using the 56000zdx's quite happily, with the shipped Multitech > >> config file. The trick is to remove the @ at the end of the > >> dialstring. The firmware in that modem doesn't seem to recognize that > >> trick. > hmm havent tried those config settings yet, but what we're getting 100% of the time with the new modems is just a page with black and white lines of noise all over it, although looking at the transcripts of the reception, all looks fine... ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
BEGIN:VCARD VERSION:2.1 N:Bachman;Jason FN:Jason Bachman ORG:Hiestand Supply Company;Accounting TITLE:Information Systems Manager TEL;WORK;VOICE:(717) 426-1921 TEL;CELL;VOICE:(717) 203-5898 TEL;WORK;FAX:(717) 426-4341 ADR;WORK:;;650 Stackstown Road;Marietta;PA;17547;United States of America LABEL;WORK;ENCODING=QUOTED-PRINTABLE:650 Stackstown Road=0D=0AMarietta, PA 17547=0D=0AUnited States of America ROLE:Information Technoligies BDAY:19721204 EMAIL;PREF;INTERNET:jabachman@hiestandsupply.com REV:20000721T130028Z END:VCARD