[hylafax-users] Unable to transmit page (NAK with operator intervention)

["Carlo Mandelli" <_NO_USER_@satnet.it>]

Hi eveybody,
I use hylafax 4.0pl2 with Linux (RedHat 5.2, kernel 2.0.36).
When i send fax to a specific remote machine (in my case is *only* one
remote fax, 1%) i get this error:

Unable to transmit page (NAK with operator intervention)

This is the log:

> Your facsimile job to XXXXXX failed because:
>     Unable to transmit page (NAK with operator intervention)
>
>     ---- Transcript of session follows ----
>
> Aug 02 15:39:07.28: [  608]: SESSION BEGIN 00000447 XXXXXXX
> Aug 02 15:39:07.28: [  608]: SEND FAX: JOB 261 DEST XXXXXXX COMMID
00000447
> Aug 02 15:39:07.28: [  608]: DELAY 2600 ms
> Aug 02 15:39:09.89: [  608]: <-- [15:ATE0V1Q0S0=0H0\r]
> Aug 02 15:39:10.03: [  608]: --> [2:OK]
> Aug 02 15:39:10.04: [  608]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
> Aug 02 15:39:10.18: [  608]: --> [2:OK]
> Aug 02 15:39:10.19: [  608]: <-- [12:AT+FCLASS=2\r]
> Aug 02 15:39:10.32: [  608]: --> [2:OK]
> Aug 02 15:39:10.33: [  608]: <-- [10:AT+FTBC=0\r]
> Aug 02 15:39:10.46: [  608]: --> [2:OK]
> Aug 02 15:39:10.47: [  608]: <-- [10:AT+FBOR=0\r]
> Aug 02 15:39:10.60: [  608]: --> [2:OK]
> Aug 02 15:39:10.61: [  608]: <-- [13:AT+FPHCTO=30\r]
> Aug 02 15:39:10.74: [  608]: --> [2:OK]
> Aug 02 15:39:10.75: [  608]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
> Aug 02 15:39:10.89: [  608]: --> [2:OK]
> Aug 02 15:39:10.90: [  608]: <-- [5:ATM0\r]
> Aug 02 15:39:11.03: [  608]: --> [2:OK]
> Aug 02 15:39:11.04: [  608]: <-- [12:AT+FCLASS=2\r]
> Aug 02 15:39:11.28: [  608]: --> [2:OK]
> Aug 02 15:39:11.29: [  608]: <-- [10:AT+FTBC=0\r]
> Aug 02 15:39:11.52: [  608]: --> [2:OK]
> Aug 02 15:39:11.53: [  608]: <-- [10:AT+FBOR=0\r]
> Aug 02 15:39:11.76: [  608]: --> [2:OK]
> Aug 02 15:39:11.77: [  608]: <-- [13:AT+FPHCTO=30\r]
> Aug 02 15:39:12.00: [  608]: --> [2:OK]
> Aug 02 15:39:12.01: [  608]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
> Aug 02 15:39:12.25: [  608]: --> [2:OK]
> Aug 02 15:39:12.26: [  608]: <-- [17:AT+FLID="S.E.P."\r]
> Aug 02 15:39:12.49: [  608]: --> [2:OK]
> Aug 02 15:39:12.56: [  608]: DIAL 0119310352
> Aug 02 15:39:12.56: [  608]: <-- [17:ATX3DTXXXXXXXXX\r]
> Aug 02 15:39:35.75: [  608]: --> [5:+FCON]
> Aug 02 15:39:38.46: [  608]: --> [29:+FCSI: "       XXXXXXXXXX"]
> Aug 02 15:39:38.47: [  608]: REMOTE CSI "XXXXXXXXXXXX"
> Aug 02 15:39:38.83: [  608]: --> [22:+FDIS: 1,3,0,2,1,0,0,4]
> Aug 02 15:39:38.84: [  608]: --> [2:OK]
> Aug 02 15:39:38.84: [  608]: REMOTE best rate 9600 bit/s
> Aug 02 15:39:38.84: [  608]: REMOTE max page width 1728 pixels in 215 mm
> Aug 02 15:39:38.84: [  608]: REMOTE max unlimited page length
> Aug 02 15:39:38.84: [  608]: REMOTE best vres 7.7 line/mm
> Aug 02 15:39:38.84: [  608]: REMOTE best format 2-D MR
> Aug 02 15:39:38.84: [  608]: REMOTE best 20 ms, 10 ms/scanline
> Aug 02 15:39:38.84: [  608]: USE 9600 bit/s
> Aug 02 15:39:38.84: [  608]: USE 20 ms, 10 ms/scanline
> Aug 02 15:39:38.84: [  608]: SEND file "docq/doc229.ps;00"
> Aug 02 15:39:38.84: [  608]: USE page width 1728 pixels in 215 mm
> Aug 02 15:39:38.84: [  608]: USE unlimited page length
> Aug 02 15:39:38.84: [  608]: USE 3.85 line/mm
> Aug 02 15:39:38.84: [  608]: USE 1-D MR
> Aug 02 15:39:38.84: [  608]: <-- [24:AT+FDIS=0,1,0,2,0,0,0,4\r]
> Aug 02 15:39:39.09: [  608]: --> [2:OK]
> Aug 02 15:39:39.10: [  608]: <-- [7:AT+FDT\r]
> Aug 02 15:39:46.69: [  608]: --> [22:+FDCS: 0,1,0,2,0,0,0,5]
> Aug 02 15:39:46.70: [  608]: --> [7:CONNECT]
> Aug 02 15:39:46.70: [  608]: SEND wait for XON
> Aug 02 15:39:46.70: [  608]: --> [1:]
> Aug 02 15:39:46.70: [  608]: SEND begin page
> Aug 02 15:40:04.84: [  608]: SENT 10648 bytes of data
> Aug 02 15:40:04.84: [  608]: SEND end page
> Aug 02 15:40:24.47: [  608]: --> [2:OK]
> Aug 02 15:40:24.48: [  608]: SEND send EOP (no more pages or documents)
> Aug 02 15:40:24.48: [  608]: <-- [9:AT+FET=2\r]
> Aug 02 15:40:28.78: [  608]: --> [8:+FPTS: 4]
> Aug 02 15:40:28.89: [  608]: --> [2:OK]
> Aug 02 15:40:28.90: [  608]: SEND recv PIN (procedural interrupt negative)
> Aug 02 15:40:28.90: [  608]: <-- [6:AT+FK\r]
> Aug 02 15:40:35.52: [  608]: --> [8:+FHNG: 2]
> Aug 02 15:40:35.53: [  608]: REMOTE HANGUP: Call aborted,  from +FK or
<CAN> (code 2)
> Aug 02 15:40:36.16: [  608]: --> [2:OK]
> Aug 02 15:40:36.17: [  608]: <-- [5:ATH0\r]
> Aug 02 15:40:36.41: [  608]: --> [2:OK]
> Aug 02 15:40:36.42: [  608]: SESSION END

Any ideas?

Thanks
Carlo

--
Use the Force, Luke.

-----------------------------------------------------------------
Carlo Mandelli   <camandel@freemail.it>  <camandel@tiscalinet.it>
Home page: www.geocities.com/siliconvalley/hub/2205
-----------------------------------------------------------------




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null