![]() |
My Hylafax usage report occasionally has an entry like this: Sender Pages Time Pg/min Errs TypRate TypData sandback@email.com 0 0:00 0.0 1 2400 2-D MMR a more typical entry ordinarily looks like this: booklett@oz.net 18 11:24 1.6 1 9600 1-D MR I have a Telebit Worldblazer Fax modem reported as follows: Jul 29 04:05:01 Beaker FaxGetty[750]: MODEM TELEBIT WorldBlazer - SA - Version LA7.01/WorldBlazer - SA - Version LA7.01 Whenever I see a TypRate of 2400 and TypData 2-D MMR it is always with a failed fax and what I hear is fax handshaking that eventually fails when the remote gives up. My modem keeps on trying for probably a minute. Is there possibly a fault in my modem causing this? log follows. To: booklett@oz.net Date: 07/29/00 16:34 Error: No response to MPS repeated 3 times ---- Transcript of session follows ---- Jul 29 16:34:38.88: [ 1233]: SESSION BEGIN 00001319 12062447787 Jul 29 16:34:38.88: [ 1233]: SEND FAX: JOB 628 DEST +12062447787 COMMID 00001319 Jul 29 16:34:38.88: [ 1233]: DELAY 3200 ms Jul 29 16:34:42.08: [ 1233]: <-- [4:ATZ\r] Jul 29 16:34:43.46: [ 1233]: --> [3:ATZ] Jul 29 16:34:43.46: [ 1233]: --> [2:OK] Jul 29 16:34:43.46: [ 1233]: <-- [15:ATE0V1Q0S0=0H0\r] Jul 29 16:34:43.49: [ 1233]: --> [14:ATE0V1Q0S0=0H0] Jul 29 16:34:43.49: [ 1233]: --> [2:OK] Jul 29 16:34:43.49: [ 1233]: <-- [23:ATS8=2S7=60S58=2&D3&C1\r] Jul 29 16:34:43.53: [ 1233]: --> [2:OK] Jul 29 16:34:43.53: [ 1233]: <-- [12:AT+FCLASS=2\r] Jul 29 16:34:43.56: [ 1233]: --> [2:OK] Jul 29 16:34:43.56: [ 1233]: <-- [10:AT+FTBC=0\r] Jul 29 16:34:43.59: [ 1233]: --> [2:OK] Jul 29 16:34:43.59: [ 1233]: <-- [10:AT+FBOR=0\r] Jul 29 16:34:43.61: [ 1233]: --> [2:OK] Jul 29 16:34:43.61: [ 1233]: <-- [13:AT+FPHCTO=30\r] Jul 29 16:34:43.64: [ 1233]: --> [2:OK] Jul 29 16:34:43.64: [ 1233]: <-- [24:AT+FDCC=1,3,2,2,0,0,0,0\r] Jul 29 16:34:43.68: [ 1233]: --> [2:OK] Jul 29 16:34:43.68: [ 1233]: <-- [7:ATL0M1\r] Jul 29 16:34:43.70: [ 1233]: --> [2:OK] Jul 29 16:34:43.70: [ 1233]: <-- [12:AT+FCLASS=2\r] Jul 29 16:34:43.83: [ 1233]: --> [2:OK] Jul 29 16:34:43.83: [ 1233]: <-- [10:AT+FTBC=0\r] Jul 29 16:34:43.95: [ 1233]: --> [2:OK] Jul 29 16:34:43.95: [ 1233]: <-- [10:AT+FBOR=0\r] Jul 29 16:34:44.08: [ 1233]: --> [2:OK] Jul 29 16:34:44.08: [ 1233]: <-- [13:AT+FPHCTO=30\r] Jul 29 16:34:44.21: [ 1233]: --> [2:OK] Jul 29 16:34:44.21: [ 1233]: <-- [24:AT+FDCC=1,3,2,2,0,0,0,0\r] Jul 29 16:34:44.35: [ 1233]: --> [2:OK] Jul 29 16:34:44.35: [ 1233]: <-- [28:AT+FLID="Blackdog Software"\r] Jul 29 16:34:44.48: [ 1233]: --> [2:OK] Jul 29 16:34:44.48: [ 1233]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,0\r] Jul 29 16:34:44.62: [ 1233]: --> [2:OK] Jul 29 16:34:44.64: [ 1233]: DIAL 2062447787 Jul 29 16:34:44.64: [ 1233]: <-- [15:ATDT2062447787\r] Jul 29 16:34:48.40: [ 1233]: --> [7:DIALING] Jul 29 16:34:56.58: [ 1233]: --> [5:RRING] Jul 29 16:35:04.75: [ 1233]: --> [5:+FCON] Jul 29 16:35:07.06: [ 1233]: --> [27:+FNSF:61 00 31 00 08 80 00 ] Jul 29 16:35:07.06: [ 1233]: REMOTE NSF "61 00 31 00 08 80 00" Jul 29 16:35:07.06: [ 1233]: NSF remote fax equipment: unknown Jul 29 16:35:07.06: [ 1233]: --> [28:+FCSI:" "] Jul 29 16:35:07.06: [ 1233]: REMOTE CSI "" Jul 29 16:35:07.06: [ 1233]: --> [21:+FDIS:1,3,0,2,3,0,0,4] Jul 29 16:35:07.06: [ 1233]: --> [2:OK] Jul 29 16:35:07.06: [ 1233]: REMOTE best rate 9600 bit/s Jul 29 16:35:07.06: [ 1233]: REMOTE max page width 1728 pixels in 215 mm Jul 29 16:35:07.06: [ 1233]: REMOTE max unlimited page length Jul 29 16:35:07.06: [ 1233]: REMOTE best vres 7.7 line/mm Jul 29 16:35:07.06: [ 1233]: REMOTE best format 2-D MMR Jul 29 16:35:07.06: [ 1233]: REMOTE best 20 ms, 10 ms/scanline Jul 29 16:35:07.06: [ 1233]: USE 9600 bit/s Jul 29 16:35:07.06: [ 1233]: USE 20 ms, 10 ms/scanline Jul 29 16:35:07.06: [ 1233]: SEND file "docq/doc1491.ps;31" Jul 29 16:35:07.06: [ 1233]: USE page width 1728 pixels in 215 mm Jul 29 16:35:07.06: [ 1233]: USE unlimited page length Jul 29 16:35:07.06: [ 1233]: USE 7.7 line/mm Jul 29 16:35:07.06: [ 1233]: USE 1-D MR Jul 29 16:35:07.06: [ 1233]: <-- [7:AT+FDT\r] Jul 29 16:35:12.85: [ 1233]: --> [21:+FDCS:1,3,0,2,0,0,0,3] Jul 29 16:35:13.01: [ 1233]: --> [7:CONNECT] Jul 29 16:35:13.01: [ 1233]: SEND wait for XON Jul 29 16:35:13.01: [ 1233]: --> [1:] Jul 29 16:35:13.01: [ 1233]: SEND begin page Jul 29 16:35:48.57: [ 1233]: SENT 36455 bytes of data Jul 29 16:35:48.57: [ 1233]: SEND end page Jul 29 16:35:52.90: [ 1233]: --> [2:OK] Jul 29 16:35:52.90: [ 1233]: SEND send MPS (more pages, same document) Jul 29 16:35:52.90: [ 1233]: <-- [9:AT+FET=0\r] Jul 29 16:36:07.76: [ 1233]: --> [8:+FHNG:52] Jul 29 16:36:07.76: [ 1233]: REMOTE HANGUP: No response to MPS repeated 3 times (code 52) Jul 29 16:36:07.76: [ 1233]: <-- [5:ATH0\r] Jul 29 16:36:07.76: [ 1233]: --> [10:NO CARRIER] Jul 29 16:36:07.76: [ 1233]: MODEM No carrier Jul 29 16:36:07.77: [ 1233]: SESSION END Paul Franz PAF Consulting Engineers | 427 - 140th Ave NE (425)641-8202 voice | Bellevue, WA 98005 (801)749-8480 fax | <http://blackdog.bellevue.wa.us/> ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null