[hylafax-users] Need transcript of correct recv session

[Enver Haase <ehaase@inf.fu-berlin.de>]

Hello out there,

I just installed the 4.1beta2 package on my linux box ---
I have an old CPV 14k4 modem which supports class 2 faxing.

Mostly I want to RECEIVE faxes with my Linux box - but the
problem is that even if the sender sees mesages like "all
went well, fax was sent ok" the fax vanishes on my linux
box.
In the /var/spool/fax/recvq the number in the seqf file is
incremented, and temporarily there's a TIFF file in that
directory which is only a few bytes - seems to be the header
but there is no data following. After the fax is "received"
the folder is empty again.
In the /var/spool/fax/log I find log files like the one below;
the point is I cannot see where there's a problem. Do GOOD
Fax transfers look like this or does it look like there was
a problem somewhere???

Can somebody with a WORKING configuration send me one of his
log files, please? [please reply to my eMail address, too]

----------------------------------------------------
Jul 24 07:49:55.77: [  213]: SESSION BEGIN 00000014 493068895070
Jul 24 07:49:55.77: [  213]: <-- [4:ATA\r]
Jul 24 07:50:03.60: [  213]: --> [5:+FCON]
Jul 24 07:50:03.60: [  213]: ANSWER: FAX CONNECTION
Jul 24 07:50:03.60: [  213]: RECV FAX: begin
Jul 24 07:50:05.74: [  213]: --> [29:+FTSI: "+49 30 68895070     "]
Jul 24 07:50:05.74: [  213]: REMOTE TSI "+49 30 68895070"
Jul 24 07:50:05.74: [  213]: --> [22:+FDCS: 0,0,0,2,0,0,0,5]
Jul 24 07:50:05.74: [  213]: REMOTE wants 2400 bit/s
Jul 24 07:50:05.74: [  213]: REMOTE wants page width 1728 pixels in 215
mm
Jul 24 07:50:05.74: [  213]: REMOTE wants unlimited page length 
Jul 24 07:50:05.74: [  213]: REMOTE wants 3.85 line/mm
Jul 24 07:50:05.74: [  213]: REMOTE wants 1-D MR
Jul 24 07:50:12.13: [  213]: --> [5:+FCON]
Jul 24 07:50:13.47: [  213]: --> [29:+FTSI: "                    "]
Jul 24 07:50:13.47: [  213]: REMOTE TSI ""
Jul 24 07:50:13.47: [  213]: --> [22:+FDCS: 0,1,0,2,0,0,0,5]
Jul 24 07:50:13.47: [  213]: REMOTE wants 4800 bit/s
Jul 24 07:50:13.47: [  213]: REMOTE wants page width 1728 pixels in 215
mm
Jul 24 07:50:13.47: [  213]: REMOTE wants unlimited page length 
Jul 24 07:50:13.47: [  213]: REMOTE wants 3.85 line/mm
Jul 24 07:50:13.47: [  213]: REMOTE wants 1-D MR
Jul 24 07:50:19.74: [  213]: --> [5:+FCON]
Jul 24 07:50:21.08: [  213]: --> [29:+FTSI: "                    "]
Jul 24 07:50:21.08: [  213]: REMOTE TSI ""
Jul 24 07:50:21.08: [  213]: --> [22:+FDCS: 0,1,0,2,0,0,0,5]
Jul 24 07:50:21.08: [  213]: REMOTE wants 4800 bit/s
Jul 24 07:50:21.08: [  213]: REMOTE wants page width 1728 pixels in 215
mm
Jul 24 07:50:21.08: [  213]: REMOTE wants unlimited page length 
Jul 24 07:50:21.08: [  213]: REMOTE wants 3.85 line/mm
Jul 24 07:50:21.08: [  213]: REMOTE wants 1-D MR
Jul 24 07:50:27.43: [  213]: --> [5:+FCON]
Jul 24 07:50:28.77: [  213]: --> [29:+FTSI: "                    "]
Jul 24 07:50:28.77: [  213]: REMOTE TSI ""
Jul 24 07:50:28.77: [  213]: --> [22:+FDCS: 0,1,0,2,0,0,0,5]
Jul 24 07:50:28.77: [  213]: REMOTE wants 4800 bit/s
Jul 24 07:50:28.77: [  213]: REMOTE wants page width 1728 pixels in 215
mm
Jul 24 07:50:28.77: [  213]: REMOTE wants unlimited page length 
Jul 24 07:50:28.77: [  213]: REMOTE wants 3.85 line/mm
Jul 24 07:50:28.77: [  213]: REMOTE wants 1-D MR
Jul 24 07:50:39.87: [  213]: --> [9:+FHNG: 01]
Jul 24 07:50:39.87: [  213]: REMOTE HANGUP: Ring detect without
successful handshake (code 1)
Jul 24 07:50:39.87: [  213]: --> [2:OK]
Jul 24 07:50:39.87: [  213]: RECV FAX: Ring detect without successful
handshake
Jul 24 07:50:39.87: [  213]: RECV FAX: end
Jul 24 07:50:39.87: [  213]: SESSION END
----------------------------------------------------------


Thanx!

Enver


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null