[hylafax-users] Not recived

[Daniel Fritsch <daniel.fritsch@totalis.de>]

HI!

Can anybody help me? There are some machines that makes errors:


Jul 16 22:08:35.21: [11046]: SESSION BEGIN 00000746 
Jul 16 22:08:35.21: [11046]: <-- [4:ATA\r]
Jul 16 22:08:42.44: [11046]: --> [4:+FCO]
Jul 16 22:08:42.44: [11046]: ANSWER: FAX CONNECTION
Jul 16 22:08:42.44: [11046]: MODEM input buffering enabled
Jul 16 22:08:42.44: [11046]: RECV FAX: begin
Jul 16 22:08:44.07: [11046]: --> [27:+FTI:"                    "]
Jul 16 22:08:44.07: [11046]: REMOTE TSI ""
Jul 16 22:08:44.35: [11046]: --> [20:+FCS:0,5,0,2,0,0,0,0]
Jul 16 22:08:44.35: [11046]: REMOTE wants 14400 bit/s
Jul 16 22:08:44.35: [11046]: REMOTE wants page width 1728 pixels in 215
mm
Jul 16 22:08:44.35: [11046]: REMOTE wants unlimited page length 
Jul 16 22:08:44.35: [11046]: REMOTE wants 3.85 line/mm
Jul 16 22:08:44.35: [11046]: REMOTE wants 1-D MR
Jul 16 22:08:47.14: [11046]: --> [2:OK]
Jul 16 22:08:47.14: [11046]: <-- [7:AT+FDR\r]
Jul 16 22:08:47.48: [11046]: --> [20:+FCS:0,5,0,2,0,0,0,0]
Jul 16 22:08:47.48: [11046]: REMOTE wants 14400 bit/s
Jul 16 22:08:47.48: [11046]: REMOTE wants page width 1728 pixels in 215
mm
Jul 16 22:08:47.48: [11046]: REMOTE wants unlimited page length 
Jul 16 22:08:47.48: [11046]: REMOTE wants 3.85 line/mm
Jul 16 22:08:47.48: [11046]: REMOTE wants 1-D MR
Jul 16 22:08:49.30: [11046]: --> [7:CONNECT]
Jul 16 22:08:49.30: [11046]: RECV: begin page
Jul 16 22:08:49.30: [11046]: RECV: send trigger 022
Jul 16 22:09:19.92: [11046]: RECV: 59 total lines, 57 bad lines, 38
consecutive bad lines
Jul 16 22:09:19.92: [11046]: --> [15:+FPS:1,97,0,0,0]
Jul 16 22:09:25.21: [11046]: --> [6:+FET:2]
Jul 16 22:09:25.21: [11046]: RECV recv EOP (no more pages or documents)
Jul 16 22:09:25.21: [11046]: --> [2:OK]
Jul 16 22:09:25.21: [11046]: RECV: REJECT page quality, 3% good lines
(95% required)
Jul 16 22:09:25.21: [11046]: RECV send RTN (retrain negative)
Jul 16 22:09:25.21: [11046]: <-- [9:AT+FPS=2\r]
Jul 16 22:09:25.35: [11046]: --> [5:ERROR]
Jul 16 22:09:25.35: [11046]: MODEM Command error
Jul 16 22:09:25.35: [11046]: REMOTE HANGUP: Unspecified Phase C error,
including too much delay between TCF and +FDR command (code 90)
Jul 16 22:09:25.36: [11046]: RECV FAX (00000746): recvq/fax00216.tif
from , route to <unspecified>, 0 pages in 0:43
Jul 16 22:09:25.36: [11046]: RECV FAX: Unspecified Phase C error,
including too much delay between TCF and +FDR command
Jul 16 22:09:25.36: [11046]: <-- [7:AT+FKS\r]
Jul 16 22:09:26.94: [11046]: --> [7:+FHS:02]
Jul 16 22:09:26.94: [11046]: REMOTE HANGUP: Call aborted,  from +FK or
<CAN> (code 2)
Jul 16 22:09:26.94: [11046]: --> [2:OK]
Jul 16 22:09:26.94: [11046]: RECV FAX (00000746): session with 
terminated abnormally: Unspecified Phase C error, including too much
delay between TCF and +FDR command
Jul 16 22:09:26.94: [11046]: RECV FAX: bin/faxrcvd "recvq/fax00216.tif"
"ttyS18" "00000746" "Unspecified Phase C error, including too much delay
between TCF and +FDR command"


-- 

Best Regards, Daniel Fritsch

*************************************************************
totalis Gesellschaft für Internet- und Businesslösungen GbR
Ostertorsteinweg 4-5
D-28203 Bremen

fon: + 49 421 70 35 00650 oder Mobil 0173 245 2682
fax: + 49 421 70 35 00601

Site: http://www.totalis.de
*************************************************************


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null