HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Re: last ditch effort



Hey,

Maybe you can use the ATX3 command to do a "blind" dial .
Then it should look like

ModemDialCmd:          ATX3DT0,%s@ 

Another solution would be to say the PBX to give the modems a 
"pseudo-freetone" like from the "Telekom".

The ATX3 solution works fine for me with my Multitech modem connected to 
a Eumex 208.

Greetings Torsten


Christian Pluym schrieb:
> 
> Hello!
> Our hylafax-4.1beta2-5rh6 on RedHat 6.2 & Digi Acceleport RAS 8 boards,
> newest libtiff etc. runs fine, but when we uncomment the config line:
> 
> ModemDialCmd:          ATDT0,%s@
> 
> so our users don't have to dial 0 to get through our PBX, the logs show
> "BUSY SIGNAL DETECTED" after ATDT0...  The same problem when we simply leave


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions