[hylafax-users] question, first international fax

[Lee Howard <faxguy@deanox.com>]

Hi I just sent my first international fax (from Utah, USA to Colombia, SA)
today since I began using hylafax-4.1beta2-5 (RPM from Darren) on my RedHat
6.1 system.  The modem is a 14.4 BestData Class 2 (Rockwell config).
Anyway, the fax took 6 attempts to go through, with the first 5 attempts
failing with various errors.  Once one page went through, but not the
second.  When it went though finally I only faxed the second page (omitting
the coverpage).  Later, I attempted another two-page fax to it, which went
flawlessly (the receiver may have changed fax machines on me, though).
Anyway, I'd like to know what the following errors mean, and why they would
occur.  These are the first sending errors that I've ever had with this
modem... or HylaFAX (except for busy or no answer issues).  Lastly, I've
got some questions regarding the included info file for this number, if
that helps.

Sending errors have been so infrequent that reproducing these will be
difficult, but I'm hoping that this proves useful as some sort of
diagnostic measure.  Later, I ended up trying my other fax server (which
uses a 56K 3Com/USR modem), and it had troubles also, but I fear that it is
a config problem more than anything, so I'll post that later, maybe.

Thanks.

Lee Howard
....
Jul 11 11:01:55.52: [13172]: USE 7.7 line/mm
Jul 11 11:01:55.52: [13172]: USE 1-D MR
Jul 11 11:01:55.52: [13172]: <-- [24:AT+FDIS=1,1,0,2,0,0,0,4\r]
Jul 11 11:01:55.76: [13172]: --> [2:OK]
Jul 11 11:01:55.76: [13172]: <-- [7:AT+FDT\r]
Jul 11 11:02:34.29: [13172]: --> [9:+FHNG: 50]
Jul 11 11:02:34.29: [13172]: REMOTE HANGUP: Unspecified Transmit Phase D
error, including +FPHCTO timeout between data and +FET command (code 50)
Jul 11 11:02:35.43: [13172]: --> [2:OK]
Jul 11 11:05:35.43: [13172]: MODEM <Timeout>
Jul 11 11:05:35.43: [13172]: <-- [5:ATH0\r]
Jul 11 11:05:35.68: [13172]: --> [2:OK]
Jul 11 11:05:35.69: [13172]: SESSION END
(see http://www.hylafax.org/archive/1998-08/msg00028.php, I'm using 1-D
here, though.)

....
Jul 11 11:12:18.98: [13270]: SEND begin page
Jul 11 11:12:53.91: [13270]: SENT 34253 bytes of data
Jul 11 11:12:53.91: [13270]: SEND end page
Jul 11 11:13:03.06: [13270]: --> [2:OK]
Jul 11 11:13:03.06: [13270]: SEND send EOP (no more pages or documents)
Jul 11 11:13:03.06: [13270]: <-- [9:AT+FET=2\r]
Jul 11 11:13:30.83: [13270]: --> [9:+FHNG: 54]
Jul 11 11:13:30.83: [13270]: REMOTE HANGUP: No response to EOP repeated 3
times (code 54)
Jul 11 11:13:30.83: [13270]: <-- [5:ATH0\r]
Jul 11 11:13:31.97: [13270]: --> [2:OK]
Jul 11 11:13:31.97: [13270]: SESSION END
(http://www.hylafax.org/archive/2000-06/msg00007.php indicates possible
xonxoff errors, but I'm using rtscts.  The archives show a lot of traffic
regarding EOP errors, but I didn't notice any solutions.)

....
Jul 11 11:19:22.06: [13319]: USE 1-D MR
Jul 11 11:19:22.06: [13319]: <-- [24:AT+FDIS=1,1,0,2,0,0,0,4\r]
Jul 11 11:19:22.30: [13319]: --> [2:OK]
Jul 11 11:19:22.30: [13319]: <-- [7:AT+FDT\r]
Jul 11 11:19:50.47: [13319]: --> [9:+FHNG: 25]
Jul 11 11:19:50.47: [13319]: REMOTE HANGUP: DCS sent 3 times without
response (code 25)
Jul 11 11:19:51.61: [13319]: --> [2:OK]
Jul 11 11:22:51.61: [13319]: MODEM <Timeout>
Jul 11 11:22:51.62: [13319]: SEND FAILED: DCS sent 3 times without
response; too many attempts to send
Jul 11 11:22:51.62: [13319]: <-- [5:ATH0\r]
Jul 11 11:22:51.85: [13319]: --> [2:OK]
Jul 11 11:22:51.86: [13319]: SESSION END
(Although I see reports of this error in the archives, I don't see any
discussion on it.  What does it mean?)

....
Jul 11 12:31:35.62: [14083]: <-- [24:AT+FDIS=1,1,0,2,1,0,0,4\r]
Jul 11 12:31:35.86: [14083]: --> [2:OK]
Jul 11 12:31:35.86: [14083]: <-- [7:AT+FDT\r]
Jul 11 12:32:15.09: [14083]: --> [9:+FHNG: 25]
Jul 11 12:32:15.09: [14083]: REMOTE HANGUP: DCS sent 3 times without
response (code 25)
Jul 11 12:32:16.22: [14083]: --> [2:OK]
Jul 11 12:35:16.22: [14083]: MODEM <Timeout>
Jul 11 12:35:16.22: [14083]: <-- [5:ATH0\r]
Jul 11 12:35:16.47: [14083]: --> [2:OK]
Jul 11 12:35:16.48: [14083]: SESSION END
(Here's another one...)

....
Jul 11 13:06:39.67: [14364]: SENT 21874 bytes of data
Jul 11 13:06:39.67: [14364]: SEND end page
Jul 11 13:07:01.22: [14364]: --> [2:OK]
Jul 11 13:07:01.22: [14364]: SEND send EOP (no more pages or documents)
Jul 11 13:07:01.22: [14364]: <-- [9:AT+FET=2\r]
Jul 11 13:07:06.67: [14364]: --> [8:+FPTS: 4]
Jul 11 13:07:06.78: [14364]: --> [2:OK]
Jul 11 13:07:06.78: [14364]: SEND recv PIN (procedural interrupt negative)
Jul 11 13:07:06.78: [14364]: <-- [6:AT+FK\r]
Jul 11 13:07:18.41: [14364]: --> [8:+FHNG: 2]
Jul 11 13:07:18.41: [14364]: REMOTE HANGUP: Call aborted,  from +FK or
<CAN> (code 2)
Jul 11 13:07:19.55: [14364]: --> [2:OK]
Jul 11 13:07:19.55: [14364]: <-- [5:ATH0\r]
Jul 11 13:07:19.79: [14364]: --> [2:OK]
Jul 11 13:07:19.80: [14364]: SESSION END
(Again, I don't see any discussion concerning this error...)

supportsHighRes:yes
supports2DEncoding:no
supportsPostScript:no
calledBefore:yes
maxPageWidth:1728
maxPageLength:-1
maxSignallingRate:"14400"
minScanlineTime:"0ms"
remoteCSI:"2585257"
sendFailures:0
lastSendFailure:"Document was encoded with 2DMR, but client does not
support th$
dialFailures:0
lastDialFailure:"Busy signal detected"
&pagingProtocol:"ixo"





____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null