[hylafax-users] Re: no lines

[Tomasz Misterka <tomasz@hieroglif.com.pl>]

Andreas Hoedle wrote:
>
>
> Hello
>
> Maybe your TIFF-viewer isn't capable of showing FAX-TIFF (FAX is a
> special compressed TIFF) the right way. Try a different one (WangImg on
> Windows NT). Other possibilty is a wrong flow-control schema for your
> modem.
>
> Hope it helps
>
> Andreas

I was trying ps, eps and tiff. Tiffs were generated by hylafax, because
they were the same faxes which I received, and when I printed them on
normal printer they were ok.
I was trying setup modem on Class 1 and 2.0 Fax but without any results.

Tomasz Misterka
p.s. Below is log of one of my sendfax job maybe it help:

> Jul 06 23:00:09.52: [  251]: SESSION BEGIN 00000086 6448834
> Jul 06 23:00:09.52: [  251]: SEND FAX: JOB 38 DEST 9,,6448834 COMMID
> 00000086
> Jul 06 23:00:09.52: [  251]: DELAY 2600 ms
> Jul 06 23:00:12.12: [  251]: <-- [15:ATE0V1Q0S0=0H0\r]
> Jul 06 23:00:12.27: [  251]: --> [2:OK]
> Jul 06 23:00:12.27: [  251]: <-- [14:ATS8=2S7=60&K\r]
> Jul 06 23:00:12.41: [  251]: --> [2:OK]
> Jul 06 23:00:12.41: [  251]: <-- [14:AT+FCLASS=2.0\r]
> Jul 06 23:00:12.55: [  251]: --> [2:OK]
> Jul 06 23:00:12.55: [  251]: <-- [9:AT+FLO=0\r]
> Jul 06 23:00:12.69: [  251]: --> [2:OK]
> Jul 06 23:00:12.69: [  251]: <-- [9:AT+FPP=0\r]
> Jul 06 23:00:12.83: [  251]: --> [2:OK]
> Jul 06 23:00:12.83: [  251]: <-- [9:AT+FBO=0\r]
> Jul 06 23:00:12.97: [  251]: --> [2:OK]
> Jul 06 23:00:12.97: [  251]: <-- [10:AT+FCT=30\r]
> Jul 06 23:00:13.11: [  251]: --> [2:OK]
> Jul 06 23:00:13.11: [  251]: <-- [15:AT+FNR=1,1,1,1\r]
> Jul 06 23:00:13.26: [  251]: --> [2:OK]
> Jul 06 23:00:13.26: [  251]: <-- [9:AT+FIE=0\r]
> Jul 06 23:00:13.40: [  251]: --> [2:OK]
> Jul 06 23:00:13.40: [  251]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Jul 06 23:00:13.55: [  251]: --> [2:OK]
> Jul 06 23:00:13.55: [  251]: <-- [7:ATL1M1\r]
> Jul 06 23:00:13.69: [  251]: --> [2:OK]
> Jul 06 23:00:13.69: [  251]: <-- [14:AT+FCLASS=2.0\r]
> Jul 06 23:00:13.93: [  251]: --> [2:OK]
> Jul 06 23:00:13.93: [  251]: <-- [9:AT+FLO=0\r]
> Jul 06 23:00:14.17: [  251]: --> [2:OK]
> Jul 06 23:00:14.17: [  251]: <-- [9:AT+FPP=0\r]
> Jul 06 23:00:14.41: [  251]: --> [2:OK]
> Jul 06 23:00:14.41: [  251]: <-- [9:AT+FBO=0\r]
> Jul 06 23:00:14.65: [  251]: --> [2:OK]
> Jul 06 23:00:14.65: [  251]: <-- [10:AT+FCT=30\r]
> Jul 06 23:00:14.89: [  251]: --> [2:OK]
> Jul 06 23:00:14.89: [  251]: <-- [15:AT+FNR=1,1,1,1\r]
> Jul 06 23:00:15.14: [  251]: --> [2:OK]
> Jul 06 23:00:15.14: [  251]: <-- [9:AT+FIE=0\r]
> Jul 06 23:00:15.38: [  251]: --> [2:OK]
> Jul 06 23:00:15.38: [  251]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Jul 06 23:00:15.63: [  251]: --> [2:OK]
> Jul 06 23:00:15.63: [  251]: <-- [17:AT+FLI="PolChip"\r]
> Jul 06 23:00:15.88: [  251]: --> [2:OK]
> Jul 06 23:00:15.90: [  251]: DIAL 9,,6448834
> Jul 06 23:00:15.90: [  251]: <-- [15:ATDT9,,6448834\r]
> Jul 06 23:00:37.30: [  251]: --> [4:+FCO]
> Jul 06 23:00:39.78: [  251]: -->
> [79:+FNF:0000119000855710506F6C4368697020576172737A617761010C010A002C00809180020101]
> Jul 06 23:00:39.78: [  251]: REMOTE NSF
> "0000119000855710506F6C4368697020576172737A617761010C010A002C00809180020101"
> Jul 06 23:00:39.78: [  251]: --> [20:+FIS:1,3,0,2,1,0,0,2]
> Jul 06 23:00:39.78: [  251]: --> [2:OK]
> Jul 06 23:00:39.78: [  251]: REMOTE best rate 9600 bit/s
> Jul 06 23:00:39.78: [  251]: REMOTE max page width 1728 pixels in 215 mm
> Jul 06 23:00:39.78: [  251]: REMOTE max unlimited page length
> Jul 06 23:00:39.78: [  251]: REMOTE best vres 7.7 line/mm
> Jul 06 23:00:39.78: [  251]: REMOTE best format 2-D MR
> Jul 06 23:00:39.78: [  251]: REMOTE best 10 ms, 5 ms/scanline
> Jul 06 23:00:39.78: [  251]: USE 9600 bit/s
> Jul 06 23:00:39.78: [  251]: USE 10 ms, 5 ms/scanline
> Jul 06 23:00:39.78: [  251]: SEND file "docq/doc38.ps;30"
> Jul 06 23:00:39.78: [  251]: USE page width 1728 pixels in 215 mm
> Jul 06 23:00:39.78: [  251]: USE unlimited page length
> Jul 06 23:00:39.78: [  251]: USE 3.85 line/mm
> Jul 06 23:00:39.78: [  251]: USE 1-D MR
> Jul 06 23:00:39.78: [  251]: <-- [23:AT+FIS=0,3,0,2,0,0,0,2\r]
> Jul 06 23:00:40.03: [  251]: --> [2:OK]
> Jul 06 23:00:40.03: [  251]: <-- [7:AT+FDT\r]
> Jul 06 23:00:40.31: [  251]: --> [20:+FCS:0,3,0,2,0,0,0,2]
> Jul 06 23:00:45.53: [  251]: --> [20:+FCS:0,2,0,2,0,0,0,2]
> Jul 06 23:00:51.09: [  251]: --> [7:CONNECT]
> Jul 06 23:00:51.09: [  251]: SEND begin page
> Jul 06 23:00:51.09: [  251]: <-- data [1028]
> Jul 06 23:00:51.09: [  251]: <-- data [1025]
> Jul 06 23:00:51.09: [  251]: <-- data [1026]
> Jul 06 23:00:51.09: [  251]: <-- data [1026]
> Jul 06 23:00:51.09: [  251]: <-- data [1027]
> Jul 06 23:00:53.08: [  251]: <-- data [1026]
> Jul 06 23:00:53.08: [  251]: <-- data [1026]
> Jul 06 23:00:53.08: [  251]: <-- data [1027]
> Jul 06 23:00:55.08: [  251]: <-- data [1025]
> Jul 06 23:00:55.08: [  251]: <-- data [1025]
> Jul 06 23:00:55.08: [  251]: <-- data [1026]
> Jul 06 23:00:55.08: [  251]: <-- data [1026]
> Jul 06 23:00:57.08: [  251]: <-- data [1026]
> Jul 06 23:00:57.08: [  251]: <-- data [1025]
> Jul 06 23:00:57.08: [  251]: <-- data [1024]
> Jul 06 23:00:57.08: [  251]: <-- data [1024]
> Jul 06 23:00:59.07: [  251]: <-- data [612]
> Jul 06 23:00:59.07: [  251]: SENT 16996 bytes of data
> Jul 06 23:00:59.07: [  251]: SEND 1D RTC
> Jul 06 23:00:59.07: [  251]: <-- data [9]
> Jul 06 23:00:59.07: [  251]: SEND end page
> Jul 06 23:00:59.07: [  251]: SEND send EOP (no more pages or documents)
> Jul 06 23:00:59.07: [  251]: <-- data [2]
> Jul 06 23:01:14.08: [  251]: --> [7:+FHS:00]
> Jul 06 23:01:14.08: [  251]: REMOTE HANGUP: Normal and proper end of
> connection (code 0)
> Jul 06 23:01:14.08: [  251]: SEND recv MCF (message confirmation)
> Jul 06 23:01:14.08: [  251]: SEND FAX (00000086): FROM
> szerszen@linux.polchip.local.pl TO 9,,6448834 (page 1 of 1 sent in 0:35)
> Jul 06 23:01:14.08: [  251]: SEND FAX (00000086): FROM
> szerszen@linux.polchip.local.pl TO 9,,6448834 (docq/doc38.ps;30 sent in
> 0:35)
> Jul 06 23:01:14.08: [  251]: <-- [5:ATH0\r]
> Jul 06 23:01:14.20: [  251]: --> [2:OK]
> Jul 06 23:01:14.20: [  251]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null