[hylafax-users] Can't receive fax

["u.kopka" <u.kopka@acc-bochum.com>]

Hello,
I got problems on receiving faxes. I have:
SuSe Linux 6.4 (probably latest version, because hylafax is included)
Hylafax 4.1 beta 2 - 66
Elsa 56k Internet c
Uart 16550A
Board Asus dual proc (133Mhz)

I tried:
The 56k Internet modem
An older Elsa microlink 28.8 
An USR sportstar flash
Ihe faxmodem scripts for Elsa (two different because I tried two modems) that I
found here at hylafax.
Different cables
The modems on both ports (ttyS0 and ttyS1)

I get always the almost same log (with every combination):

Jul 03 18:06:44.36: [  295]: SESSION BEGIN 00000019 492349530801
Jul 03 18:06:44.37: [  295]: <-- [4:ATA\r]
Jul 03 18:06:52.83: [  295]: --> [5:+FCON]
Jul 03 18:06:52.84: [  295]: ANSWER: FAX CONNECTION
Jul 03 18:06:52.84: [  295]: MODEM input buffering enabled
Jul 03 18:06:52.84: [  295]: RECV FAX: begin
Jul 03 18:06:56.70: [  295]: --> [5:+FCFR]
Jul 03 18:06:56.70: [  295]: --> [28:+FTSI:"0049 685459         "]
Jul 03 18:06:56.70: [  295]: REMOTE TSI "0049 685459"
Jul 03 18:06:56.70: [  295]: --> [21:+FDCS:0,3,0,2,0,0,0,3]
Jul 03 18:06:56.70: [  295]: REMOTE wants 9600 bit/s
Jul 03 18:06:56.70: [  295]: REMOTE wants page width 1728 pixels in 215 mm
Jul 03 18:06:56.70: [  295]: REMOTE wants unlimited page length 
Jul 03 18:06:56.70: [  295]: REMOTE wants 3.85 line/mm
Jul 03 18:06:56.70: [  295]: REMOTE wants 1-D MR
Jul 03 18:06:56.70: [  295]: --> [2:OK]
Jul 03 18:06:56.70: [  295]: <-- [7:AT+FDR\r]
Jul 03 18:06:59.17: [  295]: --> [7:CONNECT]
Jul 03 18:06:59.18: [  295]: RECV: begin page
Jul 03 18:06:59.18: [  295]: RECV: send trigger 021             
Jul 03 18:06:59.18: [  295]: <-- data [1]
Jul 03 18:40:40.27: [  295]: CLOSE /dev/ttyS1


the USR hangs at begin page the other elsa sends trigger 022

because of the very similar log the modem might not be source. There was a
posting from Michael moeller in 1998. He wrote that the Uart 16550A could be
responsible. So he changed from bi- to uni-directional during fax receive. How?
With the faxmodem script? But that should have worked with my modem too.
So I don't know were to search and what to change anymore.

May be you have an idea
Thanks

Ulrich Kopka




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null