[hylafax-users] What does this mean??

[Daniel Fritsch <daniel.fritsch@totalis.de>]

HellO!
Whats wrong????








Jul 05 15:44:54.06: [  254]: SESSION BEGIN 00000576 49421703500602
Jul 05 15:44:54.06: [  254]: <-- [4:ATA\r]
Jul 05 15:45:01.81: [  254]: --> [4:+FCO]
Jul 05 15:45:01.81: [  254]: ANSWER: FAX CONNECTION
Jul 05 15:45:01.81: [  254]: MODEM input buffering enabled
Jul 05 15:45:01.81: [  254]: RECV FAX: begin
Jul 05 15:45:03.51: [  254]: --> [27:+FTI:"     +49 40 51320500"]
Jul 05 15:45:03.51: [  254]: REMOTE TSI "+49 40 51320500"
Jul 05 15:45:03.82: [  254]: --> [20:+FCS:0,5,0,2,0,0,0,0]
Jul 05 15:45:03.82: [  254]: REMOTE wants 14400 bit/s
Jul 05 15:45:03.82: [  254]: REMOTE wants page width 1728 pixels in 215
mm
Jul 05 15:45:03.82: [  254]: REMOTE wants unlimited page length 
Jul 05 15:45:03.82: [  254]: REMOTE wants 3.85 line/mm
Jul 05 15:45:03.82: [  254]: REMOTE wants 1-D MR
Jul 05 15:45:03.98: [  254]: --> [2:OK]
Jul 05 15:45:03.98: [  254]: <-- [7:AT+FDR\r]
Jul 05 15:45:07.22: [  254]: --> [20:+FCS:0,5,0,2,0,0,0,0]
Jul 05 15:45:07.22: [  254]: REMOTE wants 14400 bit/s
Jul 05 15:45:07.22: [  254]: REMOTE wants page width 1728 pixels in 215
mm
Jul 05 15:45:07.22: [  254]: REMOTE wants unlimited page length 
Jul 05 15:45:07.22: [  254]: REMOTE wants 3.85 line/mm
Jul 05 15:45:07.22: [  254]: REMOTE wants 1-D MR
Jul 05 15:45:09.08: [  254]: --> [7:CONNECT]
Jul 05 15:45:09.08: [  254]: RECV: begin page
Jul 05 15:45:09.08: [  254]: RECV: send trigger 022
Jul 05 15:45:27.65: [  254]: RECV: 1187 total lines, 6 bad lines, 6
consecutive bad lines
Jul 05 15:45:27.65: [  254]: --> [17:+FPS:1,1190,0,0,0]
Jul 05 15:45:32.01: [  254]: --> [6:+FET:0]
Jul 05 15:45:32.01: [  254]: RECV recv MPS (more pages, same document)
Jul 05 15:45:32.01: [  254]: --> [2:OK]
Jul 05 15:45:32.01: [  254]: RECV: REJECT page quality, 6-line run (max
5)
Jul 05 15:45:32.01: [  254]: RECV send RTN (retrain negative)
Jul 05 15:45:32.01: [  254]: <-- [9:AT+FPS=2\r]
Jul 05 15:45:32.16: [  254]: --> [5:ERROR]
Jul 05 15:45:32.16: [  254]: MODEM Command error
Jul 05 15:45:32.16: [  254]: REMOTE HANGUP: Unspecified Phase C error,
including too much delay between TCF and +FDR command (code 90)
Jul 05 15:45:32.17: [  254]: RECV FAX (00000576): recvq/fax00183.tif
from +49 40 51320500, route to <unspecified>, 0 pages in 0:31
Jul 05 15:45:32.17: [  254]: RECV FAX: Unspecified Phase C error,
including too much delay between TCF and +FDR command
Jul 05 15:45:32.17: [  254]: <-- [7:AT+FKS\r]
Jul 05 15:45:33.70: [  254]: --> [7:+FHS:02]
Jul 05 15:45:33.70: [  254]: REMOTE HANGUP: Call aborted,  from +FK or
<CAN> (code 2)
Jul 05 15:45:33.70: [  254]: --> [2:OK]
Jul 05 15:45:33.70: [  254]: RECV FAX (00000576): session with +49 40
51320500 terminated abnormally: Unspecified Phase C error, including too
much delay between TCF and +FDR command
Jul 05 15:45:33.70: [  254]: RECV FAX: bin/faxrcvd "recvq/fax00183.tif"
"ttyS0" "00000576" "Unspecified Phase C error, including too much delay
between TCF and +FDR command"


-- 

Best Regards, Daniel Fritsch

*************************************************************
totalis Gesellschaft f�r Internet- und Businessl�sungen GbR
Ostertorsteinweg 4-5
D-28203 Bremen

fon: + 49 421 70 35 00650 oder Mobil 0173 245 2682
fax: + 49 421 70 35 00601

Site: http://www.totalis.de
*************************************************************


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null