[hylafax-users] Problems with hylafax and modem elsa 56k proboundary="----=_NextPart_000_0021_01BFE3AC.469C6D40"

["Andreas Runge" <runge@ar-web.de>]

This is a multi-part message in MIME format.

------=_NextPart_000_0021_01BFE3AC.469C6D40
Content-Type: text/plain; charset=us-ascii
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hallo fellows,
I have a big problem to get hylafax work with my modem elsa microlink =
56k pro, latest firmware version 1.85. When I installed hylafax version =
4.1beta-61/66 I could not send out fax of my workstation, although =
everything was configured in the right way. The modem tells only =
'running and idle'. The modem does not want to hook up. The outgoing =
e-mail was only queed to the sendque of hylafax. When an inbound ring of =
a fax-mashine comes up, the modem hooks up but the connection brokes =
with errors. Since I have installed hylafax version 4.1beta2-93, I can =
send an outbound fax from my workstation without problems. Everything =
works well. When an inbound ring of a fax-mashine comes up, the modem =
does not want to hook up. When I start the modem to hook up manually =
(faxanswer modem), the fax-mashine and the modem tries to get a =
connection, but the data-transfer brokes with errors. I think that this =
is not a problem of the modem elsa microlink 56k pro but may be a bug of =
hylafax. I would be happy to get some help for my problem! For details, =
I send you my configurations and outputs of modem-works.
Thanks a lot for your help !!!
Greetings and have a nice day
Andreas

software:
SuSE Linux 6.4
hylahax 4.1beta93 and activated faxgetty (without mgetty)

modem:
elsa microlink 56k pro, latest firmware 1.85

file: config.modem (file by Elsa Germany)
#
# Id: class2.0,v 1.2 1999/01/10 09:09:37 Andreas Runge
# HylaFAX Facsimile Software
# Class 2.0 modem configuration for ELSA Modems with V.250 command set.
# Elsa Microlink 56k Pro
# EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
#
CountryCode: 49
AreaCode: 6203
FAXNumber: +49.6203.12345
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: etc/dialrules
# ServerTracing: 13
# SessionTracing: 13
ServerTracing: 527
SessionTracing: 527
# RecvFileMode: 0644
RecvFileMode: 0666
LogFileMode: 0600
# DeviceMode: 0600
DeviceMode: 0666
RingsBeforeAnswer: 3
SpeakerVolume: low
# GettyArgs: "-r -b -s %s %l"
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "+49(6203)12345"
# LogFacility: local7
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "Von %%l|%c|Seite %%p von %%t by HylaFax"
# PercentGoodLines: 80
# MaxConsecutiveBadLines: 20
MaxRecvPages: 30
# ModemPriority: 200
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2.0 # use this to supply a hint
ModemRate: 115200 # max rate for DCE-DTE communication
ModemFlowControl: rtscts # XON/XOFF flow control assumed
ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
#
# ModemDialCmd: ATDT0W%s
ModemDialCmd: ATDT%s
#
# Other possible configuration stuff. The default strings are
# shown below. Only those that are different from the defaults
# need to be included in the configuration file.
#
ModemResetCmds: ATX3 # stuff to do when modem is reset
ModemAnswerCmd: ATA # use this to answer phone
ModemNoFlowCmd: AT+IFC=3D0,0;
ModemHardFlowCmd: AT+IFC=3D2,2;
ModemSoftFlowCmd: AT+IFC=3D1,1;
ModemNoAutoAnswerCmd: ATS0=3D0 # disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
ModemEchoOffCmd: ATE0 # disable command echo
ModemVerboseResultsCmd: ATV1 # enable verbose command results
ModemResultCodesCmd: ATQ0 # enable result codes
ModemOnHookCmd: ATH # place phone on hook (hangup)
ModemSoftResetCmd: ATZ # do soft reset of modem
ModemWaitTimeCmd: ATS7=3D60 # wait 60 seconds for carrier
ModemCommaPauseTimeCmd: ATS8=3D2 # comma pause time is 2 seconds
ModemRecvFillOrder: LSB2MSB # bit order of received facsimile
ModemSendFillOrder: LSB2MSB # bit order modem expects for transmit
#
# Configuration parameters for Class 2.0 modems.
#
Class2Cmd: AT+FCLASS=3D2.0 # command to enter class 2.0
Class2BORCmd: AT+FBO=3D0 # bit order for phase B/C/D (direct)
Class2CQCmd: "" # commands to enable copy quality proc.
Class2AbortCmd: AT+FKS # abort session command
Class2CQQueryCmd: AT+FCQ=3D? # query for copy quality capabilities
Class2DCCQueryCmd: AT+FCC=3D? # query for modem capabilities
Class2TBCCmd: AT+FPP=3D0 # setup stream mode
Class2CRCmd: AT+FCR=3D1 # enable capability to receive
Class2PHCTOCmd: AT+FCT=3D30 # set phase C timeout parameter
Class2BUGCmd: AT+FBU=3D1 # enable HDLC frame tracing
Class2LIDCmd: AT+FLI # set local identifier command
Class2DCCCmd: AT+FCC # set modem capabilities command
Class2DISCmd: AT+FIS # set session parameters command
Class2DDISCmd: "" # disable pre-dial DIS command hack
Class2CIGCmd: AT+FPI # set polling identifier command
Class2NRCmd: AT+FNR=3D1,1,1,1 # setup status reporting command
Class2PIECmd: AT+FIE=3D0 # disable interrupt-enable command
Class2PTSCmd: AT+FPS # set post-page status command
Class2SPLCmd: AT+FSP # set polling indicator command
Class2NFLOCmd: AT+FLO=3D0 # set no flow control command
Class2SFLOCmd: AT+FLO=3D1 # set software flow control command
Class2HFLOCmd: AT+FLO=3D2 # set hardware flow control command
# end of file

error inbound fax-call no. 1
#
Jun 26 17:54:24.99: [ 219]: SESSION BEGIN 00000008 49620312345
Jun 26 17:54:24.99: [ 219]: <-- [4:ATA\r]
Jun 26 17:54:33.69: [ 219]: --> [4:+FCO]
Jun 26 17:54:33.69: [ 219]: ANSWER: FAX CONNECTION
Jun 26 17:54:33.69: [ 219]: MODEM input buffering enabled
Jun 26 17:54:33.69: [ 219]: RECV FAX: begin
Jun 26 17:54:38.67: [ 219]: --> [27:+FTI:"01721234567 "]
Jun 26 17:54:38.67: [ 219]: REMOTE TSI "01721234567"
Jun 26 17:54:38.67: [ 219]: --> [22:+FCS:0,5,0,2,0,0,0,0,0]
Jun 26 17:54:38.67: [ 219]: REMOTE wants 14400 bit/s
Jun 26 17:54:38.67: [ 219]: REMOTE wants page width 1728 pixels in 215 =
mm
Jun 26 17:54:38.67: [ 219]: REMOTE wants unlimited page length=20
Jun 26 17:54:38.67: [ 219]: REMOTE wants 3.85 line/mm
Jun 26 17:54:38.67: [ 219]: REMOTE wants 1-D MR
Jun 26 17:54:38.67: [ 219]: --> [2:OK]
Jun 26 17:54:38.68: [ 219]: <-- [7:AT+FDR\r]
Jun 26 17:54:40.66: [ 219]: --> [7:CONNECT]
Jun 26 17:54:40.66: [ 219]: RECV: begin page
Jun 26 17:54:40.66: [ 219]: RECV: send trigger 022
Jun 26 17:54:40.66: [ 219]: <-- data [1]
Jun 26 17:54:49.43: [ 219]: RECV: 15319 bytes of data, 1135 total lines
Jun 26 17:54:49.43: [ 219]: --> [16:+FPS:1,471,0,0,0]
Jun 26 17:54:49.59: [ 219]: --> [7:CONNECT]
Jun 26 17:54:53.95: [ 219]: --> [3:=80=10=03]
Jun 26 17:54:53.95: [ 219]: --> [14:+FPS:2,5,4,0,0]
Jun 26 17:54:53.95: [ 219]: --> [7:CONNECT]
Jun 26 17:54:58.13: [ 219]: --> [3:^=10=03]
Jun 26 17:54:58.13: [ 219]: --> [14:+FPS:2,4,3,0,0]
Jun 26 17:54:58.13: [ 219]: --> [7:CONNECT]
Jun 26 17:54:58.95: [ 219]: --> [2:=10=03]
Jun 26 17:54:58.95: [ 219]: --> [14:+FPS:2,3,2,0,0]
Jun 26 17:55:02.12: [ 219]: --> [7:CONNECT]
Jun 26 17:55:03.14: [ 219]: --> [3:=80=10=03]
Jun 26 17:55:03.14: [ 219]: --> [14:+FPS:1,1,0,0,0]
Jun 26 17:55:11.61: [ 219]: --> [7:+FHS:70]
Jun 26 17:55:11.61: [ 219]: REMOTE HANGUP: Unspecified Receive Phase B =
error (code 70)
Jun 26 17:55:11.61: [ 219]: --> [2:OK]
Jun 26 17:55:11.62: [ 219]: RECV FAX (00000008): recvq/fax00002.tif from =
01721234567, route to <unspecified>, 0 pages in 0:38
Jun 26 17:55:11.64: [ 219]: RECV FAX: Unspecified Receive Phase B error
Jun 26 17:55:11.65: [ 219]: RECV FAX (00000008): session with =
01726215045 terminated abnormally: Unspecified Receive Phase B error
Jun 26 17:55:11.65: [ 219]: RECV FAX: bin/faxrcvd "recvq/fax00002.tif" =
"modem" "00000008" "Unspecified Receive Phase B error"
Jun 26 17:55:13.19: [ 219]: RECV FAX: end
Jun 26 17:55:13.19: [ 219]: SESSION END
# end of file

error inbound fax-call no. 2
#
Jun 26 17:57:18.49: [ 219]: SESSION BEGIN 00000009 49620312345
Jun 26 17:57:18.49: [ 219]: <-- [4:ATA\r]
Jun 26 17:57:27.09: [ 219]: --> [4:+FCO]
Jun 26 17:57:27.09: [ 219]: ANSWER: FAX CONNECTION
Jun 26 17:57:27.09: [ 219]: MODEM input buffering enabled
Jun 26 17:57:27.09: [ 219]: RECV FAX: begin
Jun 26 17:57:32.07: [ 219]: --> [27:+FTI:"01721234567 "]
Jun 26 17:57:32.07: [ 219]: REMOTE TSI "01721234567"
Jun 26 17:57:32.07: [ 219]: --> [22:+FCS:0,5,0,2,0,0,0,0,0]
Jun 26 17:57:32.07: [ 219]: REMOTE wants 14400 bit/s
Jun 26 17:57:32.07: [ 219]: REMOTE wants page width 1728 pixels in 215 =
mm
Jun 26 17:57:32.07: [ 219]: REMOTE wants unlimited page length=20
Jun 26 17:57:32.07: [ 219]: REMOTE wants 3.85 line/mm
Jun 26 17:57:32.07: [ 219]: REMOTE wants 1-D MR
Jun 26 17:57:32.07: [ 219]: --> [2:OK]
Jun 26 17:57:32.07: [ 219]: <-- [7:AT+FDR\r]
Jun 26 17:57:34.06: [ 219]: --> [7:CONNECT]
Jun 26 17:57:34.06: [ 219]: RECV: begin page
Jun 26 17:57:34.06: [ 219]: RECV: send trigger 022
Jun 26 17:57:34.06: [ 219]: <-- data [1]
Jun 26 17:57:42.71: [ 219]: RECV: 15315 bytes of data, 1134 total lines
Jun 26 17:57:42.82: [ 219]: --> [16:+FPS:1,471,0,0,0]
Jun 26 17:57:42.99: [ 219]: --> [7:CONNECT]
Jun 26 17:57:47.36: [ 219]: --> [2:=10=03]
Jun 26 17:57:47.36: [ 219]: --> [14:+FPS:2,3,2,0,0]
Jun 26 17:57:47.36: [ 219]: --> [7:CONNECT]
Jun 26 17:57:48.18: [ 219]: --> [3:=D1=10=03]
Jun 26 17:57:48.18: [ 219]: --> [14:+FPS:2,6,5,0,0]
Jun 26 17:57:51.34: [ 219]: --> [7:CONNECT]
Jun 26 17:57:52.36: [ 219]: --> [3:=80=10=03]
Jun 26 17:57:52.36: [ 219]: --> [14:+FPS:2,2,1,0,0]
Jun 26 17:57:55.52: [ 219]: --> [7:CONNECT]
Jun 26 17:58:25.52: [ 219]: MODEM TIMEOUT: reading line from modem
Jun 26 17:58:25.52: [ 219]: MODEM <Timeout>
Jun 26 17:58:25.52: [ 219]: REMOTE HANGUP: Unspecified Phase C error, =
including too much delay between TCF and +FDR command (code 90)
Jun 26 17:58:25.53: [ 219]: RECV FAX (00000009): recvq/fax00003.tif from =
01721234567, route to <unspecified>, 0 pages in 0:58
Jun 26 17:58:25.53: [ 219]: RECV FAX: Unspecified Phase C error, =
including too much delay between TCF and +FDR command
Jun 26 17:58:25.53: [ 219]: <-- [7:AT+FKS\r]
Jun 26 17:58:55.53: [ 219]: MODEM TIMEOUT: reading line from modem
Jun 26 17:58:55.53: [ 219]: MODEM <Timeout>
Jun 26 17:58:55.53: [ 219]: RECV FAX (00000009): session with =
01721234567 terminated abnormally: Unspecified Phase C error, including =
too much delay between TCF and +FDR command
Jun 26 17:58:55.53: [ 219]: RECV FAX: bin/faxrcvd "recvq/fax00003.tif" =
"modem" "00000009" "Unspecified Phase C error, including too much delay =
between TCF and +FDR command"
Jun 26 17:58:56.66: [ 219]: RECV FAX: end
Jun 26 17:58:56.66: [ 219]: SESSION END
# end of file

------=_NextPart_000_0021_01BFE3AC.469C6D40
Content-Type: text/html; charset=us-ascii
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>

<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type><TITLE>e-mail Rennen</TITLE><BASE=20
href=3Dfile://C:\PROGRA~1\GEMEIN~1\MICROS~1\Stationery\>
<META content=3D'"MSHTML 4.72.3110.7"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#dcf0fa leftMargin=3D30=20
style=3D"FONT-FAMILY: Arial, Serifenlos; FONT-SIZE: 12pt" topMargin=3D5>
<DIV><FONT size=3D2>Hallo fellows,<BR>I have a big problem to get =
hylafax work=20
with my modem elsa microlink 56k pro, latest firmware version 1.85. When =
I=20
installed hylafax version 4.1beta-61/66 I could not send out fax of my=20
workstation, although everything was configured in the right way. The =
modem=20
tells only 'running and idle'. The modem does not want to hook up. The =
outgoing=20
e-mail was only queed to the sendque of hylafax. When an inbound ring of =
a=20
fax-mashine comes up, the modem hooks up but the connection brokes with =
errors.=20
Since I have installed hylafax version 4.1beta2-93, I can send an =
outbound fax=20
from my workstation without problems. Everything works well. When an =
inbound=20
ring of a fax-mashine comes up, the modem does not want to hook up. When =
I start=20
the modem to hook up manually (faxanswer modem), the fax-mashine and the =
modem=20
tries to get a connection, but the data-transfer brokes with errors. I =
think=20
that this is not a problem of the modem elsa microlink 56k pro but may =
be a bug=20
of hylafax. I would be happy to get some help for my problem! For =
details, I=20
send you my configurations and outputs of modem-works.<BR>Thanks a lot =
for your=20
help !!!<BR>Greetings and have a nice =
day<BR>Andreas<BR><BR>software:<BR>SuSE=20
Linux 6.4<BR>hylahax 4.1beta93 and </FONT><FONT size=3D2>activated =
faxgetty=20
(without mgetty)<BR><BR>modem:<BR>elsa microlink 56k pro, latest =
firmware=20
1.85<BR><BR>file: config.modem (file by Elsa Germany)<BR><FONT =
face=3DUnivers=20
size=3D2><FONT face=3D"Courier New" =
size=3D2></FONT></FONT></FONT>#</DIV>
<DIV><FONT size=3D2><FONT face=3DUnivers size=3D2><FONT face=3D"Courier =
New" size=3D2>#=20
Id: class2.0,v 1.2 1999/01/10 09:09:37 Andreas Runge<BR># HylaFAX =
Facsimile=20
Software<BR># Class 2.0 modem configuration for ELSA Modems with V.250 =
command=20
set.<BR># Elsa Microlink 56k Pro<BR># EDIT THIS CONFIGURATION TO REFLECT =
YOUR=20
SETUP<BR>#<BR>CountryCode: 49<BR>AreaCode: 6203<BR>FAXNumber:=20
+49.6203.12345<BR>LongDistancePrefix: 0<BR>InternationalPrefix:=20
00<BR>DialStringRules: etc/dialrules<BR># ServerTracing: 13<BR># =
SessionTracing:=20
13<BR>ServerTracing: 527<BR>SessionTracing: 527<BR># RecvFileMode:=20
0644<BR>RecvFileMode: 0666<BR>LogFileMode: 0600<BR># DeviceMode:=20
0600<BR>DeviceMode: 0666<BR>RingsBeforeAnswer: 3<BR>SpeakerVolume: =
low<BR>#=20
GettyArgs: &quot;-r -b -s %s %l&quot;<BR>GettyArgs: &quot;-h %l=20
dx_%s&quot;<BR>LocalIdentifier: &quot;+49(6203)12345&quot;<BR># =
LogFacility:=20
local7<BR>TagLineFont: etc/lutRS18.pcf<BR>TagLineFormat: &quot;Von =
%%l|%c|Seite=20
%%p von %%t by HylaFax&quot;<BR># PercentGoodLines: 80<BR>#=20
MaxConsecutiveBadLines: 20<BR>MaxRecvPages: 30<BR># ModemPriority: =
200<BR>#<BR>#=20
Modem-related stuff: should reflect modem command interface<BR># and =
hardware=20
connection/cabling (e.g. flow control).<BR>#</FONT></FONT></FONT></DIV>
<DIV><FONT size=3D2><FONT face=3DUnivers size=3D2><FONT face=3D"Courier =
New"=20
size=3D2>ModemType: Class2.0 # use this to supply a hint<BR>ModemRate: =
115200 #=20
max rate for DCE-DTE communication<BR>ModemFlowControl: rtscts # =
XON/XOFF flow=20
control assumed<BR>ModemSetupDTRCmd: AT&amp;D2 # setup so DTR drop =
resets=20
modem<BR>ModemSetupDCDCmd: AT&amp;C1 # setup so DCD reflects carrier (or =

not)<BR>#<BR># ModemDialCmd: ATDT0W%s<BR>ModemDialCmd: ATDT%s<BR>#<BR># =
Other=20
possible configuration stuff. The default strings are<BR># shown below. =
Only=20
those that are different from the defaults<BR># need to be included in =
the=20
configuration file.<BR>#<BR>ModemResetCmds: ATX3 # stuff to do when =
modem is=20
reset<BR>ModemAnswerCmd: ATA # use this to answer =
phone<BR>ModemNoFlowCmd:=20
AT+IFC=3D0,0;<BR>ModemHardFlowCmd: AT+IFC=3D2,2;<BR>ModemSoftFlowCmd:=20
AT+IFC=3D1,1;<BR>ModemNoAutoAnswerCmd: ATS0=3D0 # disable =
auto-answer<BR>#<BR># Set=20
modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.<BR># Note that =
we both=20
turn the speaker on/off and set volume.<BR>#<BR>ModemSetVolumeCmd: =
&quot;ATM0=20
ATL0M1 ATL1M1 ATL2M1 ATL3M1&quot;<BR>ModemEchoOffCmd: ATE0 # disable =
command=20
echo<BR>ModemVerboseResultsCmd: ATV1 # enable verbose command=20
results<BR>ModemResultCodesCmd: ATQ0 # enable result =
codes<BR>ModemOnHookCmd:=20
ATH # place phone on hook (hangup)<BR>ModemSoftResetCmd: ATZ # do soft =
reset of=20
modem<BR>ModemWaitTimeCmd: ATS7=3D60 # wait 60 seconds for=20
carrier<BR>ModemCommaPauseTimeCmd: ATS8=3D2 # comma pause time is 2=20
seconds<BR>ModemRecvFillOrder: LSB2MSB # bit order of received=20
facsimile<BR>ModemSendFillOrder: LSB2MSB # bit order modem expects for=20
transmit<BR>#<BR># Configuration parameters for Class 2.0=20
modems.<BR>#<BR>Class2Cmd: AT+FCLASS=3D2.0 # command to enter class=20
2.0<BR>Class2BORCmd: AT+FBO=3D0 # bit order for phase B/C/D=20
(direct)<BR>Class2CQCmd: &quot;&quot; # commands to enable copy quality=20
proc.<BR>Class2AbortCmd: AT+FKS # abort session =
command<BR>Class2CQQueryCmd:=20
AT+FCQ=3D? # query for copy quality capabilities<BR>Class2DCCQueryCmd: =
AT+FCC=3D? #=20
query for modem capabilities<BR>Class2TBCCmd: AT+FPP=3D0 # setup stream=20
mode<BR>Class2CRCmd: AT+FCR=3D1 # enable capability to =
receive<BR>Class2PHCTOCmd:=20
AT+FCT=3D30 # set phase C timeout parameter<BR>Class2BUGCmd: AT+FBU=3D1 =
# enable=20
HDLC frame tracing<BR>Class2LIDCmd: AT+FLI # set local identifier=20
command<BR>Class2DCCCmd: AT+FCC # set modem capabilities=20
command<BR>Class2DISCmd: AT+FIS # set session parameters=20
command<BR>Class2DDISCmd: &quot;&quot; # disable pre-dial DIS command=20
hack<BR>Class2CIGCmd: AT+FPI # set polling identifier =
command<BR>Class2NRCmd:=20
AT+FNR=3D1,1,1,1 # setup status reporting command<BR>Class2PIECmd: =
AT+FIE=3D0 #=20
disable interrupt-enable command<BR>Class2PTSCmd: AT+FPS # set post-page =
status=20
command<BR>Class2SPLCmd: AT+FSP # set polling indicator=20
command<BR>Class2NFLOCmd: AT+FLO=3D0 # set no flow control=20
command<BR>Class2SFLOCmd: AT+FLO=3D1 # set software flow control=20
command<BR></FONT><FONT face=3DUnivers size=3D2>Class2HFLOCmd: =
AT+FLO=3D2 # set=20
hardware flow control command<BR></FONT># end of =
file<BR></FONT></FONT><FONT=20
size=3D2><FONT face=3DUnivers size=3D2><BR>error inbound fax-call no. =
1<BR><FONT=20
face=3DUnivers size=3D2></FONT></FONT></FONT>#</DIV>
<DIV><FONT size=3D2><FONT face=3DUnivers size=3D2><FONT face=3DUnivers =
size=3D2>Jun 26=20
17:54:24.99: [ 219]: SESSION BEGIN 00000008 49620312345<BR>Jun 26 =
17:54:24.99: [=20
219]: &lt;-- [4:ATA\r]<BR>Jun 26 17:54:33.69: [ 219]: --&gt; =
[4:+FCO]<BR>Jun 26=20
17:54:33.69: [ 219]: ANSWER: FAX CONNECTION<BR>Jun 26 17:54:33.69: [ =
219]: MODEM=20
input buffering enabled<BR>Jun 26 17:54:33.69: [ 219]: RECV FAX: =
begin<BR>Jun 26=20
17:54:38.67: [ 219]: --&gt; [27:+FTI:&quot;01721234567 &quot;]<BR>Jun 26 =

17:54:38.67: [ 219]: REMOTE TSI &quot;01721234567&quot;<BR>Jun 26 =
17:54:38.67: [=20
219]: --&gt; [22:+FCS:0,5,0,2,0,0,0,0,0]<BR>Jun 26 17:54:38.67: [ 219]: =
REMOTE=20
wants 14400 bit/s<BR>Jun 26 17:54:38.67: [ 219]: REMOTE wants page width =
1728=20
pixels in 215 mm<BR>Jun 26 17:54:38.67: [ 219]: REMOTE wants unlimited =
page=20
length <BR>Jun 26 17:54:38.67: [ 219]: REMOTE wants 3.85 line/mm<BR>Jun =
26=20
17:54:38.67: [ 219]: REMOTE wants 1-D MR<BR>Jun 26 17:54:38.67: [ 219]: =
--&gt;=20
[2:OK]<BR>Jun 26 17:54:38.68: [ 219]: &lt;-- [7:AT+FDR\r]<BR>Jun 26 =
17:54:40.66:=20
[ 219]: --&gt; [7:CONNECT]<BR>Jun 26 17:54:40.66: [ 219]: RECV: begin=20
page<BR>Jun 26 17:54:40.66: [ 219]: RECV: send trigger 022<BR>Jun 26=20
17:54:40.66: [ 219]: &lt;-- data [1]<BR>Jun 26 17:54:49.43: [ 219]: =
RECV: 15319=20
bytes of data, 1135 total lines<BR>Jun 26 17:54:49.43: [ 219]: --&gt;=20
[16:+FPS:1,471,0,0,0]<BR>Jun 26 17:54:49.59: [ 219]: --&gt; =
[7:CONNECT]<BR>Jun=20
26 17:54:53.95: [ 219]: --&gt; [3:=80=10=03]<BR>Jun 26 17:54:53.95: [ =
219]: --&gt;=20
[14:+FPS:2,5,4,0,0]<BR>Jun 26 17:54:53.95: [ 219]: --&gt; =
[7:CONNECT]<BR>Jun 26=20
17:54:58.13: [ 219]: --&gt; [3:^=10=03]<BR>Jun 26 17:54:58.13: [ 219]: =
--&gt;=20
[14:+FPS:2,4,3,0,0]<BR>Jun 26 17:54:58.13: [ 219]: --&gt; =
[7:CONNECT]<BR>Jun 26=20
17:54:58.95: [ 219]: --&gt; [2:=10=03]<BR>Jun 26 17:54:58.95: [ 219]: =
--&gt;=20
[14:+FPS:2,3,2,0,0]<BR>Jun 26 17:55:02.12: [ 219]: --&gt; =
[7:CONNECT]<BR>Jun 26=20
17:55:03.14: [ 219]: --&gt; [3:=80=10=03]<BR>Jun 26 17:55:03.14: [ 219]: =
--&gt;=20
[14:+FPS:1,1,0,0,0]<BR></FONT><FONT face=3DUnivers size=3D2>Jun 26 =
17:55:11.61: [=20
219]: --&gt; [7:+FHS:70]<BR>Jun 26 17:55:11.61: [ 219]: REMOTE HANGUP:=20
Unspecified Receive Phase B error (code 70)<BR>Jun 26 17:55:11.61: [ =
219]:=20
--&gt; [2:OK]<BR>Jun 26 17:55:11.62: [ 219]: RECV FAX (00000008):=20
recvq/fax00002.tif from 01721234567, route to &lt;unspecified&gt;, 0 =
pages in=20
0:38<BR>Jun 26 17:55:11.64: [ 219]: RECV FAX: Unspecified Receive Phase =
B=20
error<BR>Jun 26 17:55:11.65: [ 219]: RECV FAX (00000008): session with=20
01726215045 terminated abnormally: Unspecified Receive Phase B =
error<BR>Jun 26=20
17:55:11.65: [ 219]: RECV FAX: bin/faxrcvd =
&quot;recvq/fax00002.tif&quot;=20
&quot;modem&quot; &quot;00000008&quot; &quot;Unspecified Receive Phase B =

error&quot;<BR>Jun 26 17:55:13.19: [ 219]: RECV FAX: end<BR>Jun 26 =
17:55:13.19:=20
[ 219]: SESSION END<BR># end of file<BR></FONT></FONT><FONT =
face=3DUnivers=20
size=3D2><BR>error inbound fax-call no. 2<BR>#<BR><FONT face=3DUnivers =
size=3D2>Jun 26=20
17:57:18.49: [ 219]: SESSION BEGIN 00000009 49620312345<BR>Jun 26 =
17:57:18.49: [=20
219]: &lt;-- [4:ATA\r]<BR>Jun 26 17:57:27.09: [ 219]: --&gt; =
[4:+FCO]<BR>Jun 26=20
17:57:27.09: [ 219]: ANSWER: FAX CONNECTION<BR>Jun 26 17:57:27.09: [ =
219]: MODEM=20
input buffering enabled<BR>Jun 26 17:57:27.09: [ 219]: RECV FAX: =
begin<BR>Jun 26=20
17:57:32.07: [ 219]: --&gt; [27:+FTI:&quot;01721234567 &quot;]<BR>Jun 26 =

17:57:32.07: [ 219]: REMOTE TSI &quot;01721234567&quot;<BR>Jun 26 =
17:57:32.07: [=20
219]: --&gt; [22:+FCS:0,5,0,2,0,0,0,0,0]<BR>Jun 26 17:57:32.07: [ 219]: =
REMOTE=20
wants 14400 bit/s<BR>Jun 26 17:57:32.07: [ 219]: REMOTE wants page width =
1728=20
pixels in 215 mm<BR>Jun 26 17:57:32.07: [ 219]: REMOTE wants unlimited =
page=20
length <BR>Jun 26 17:57:32.07: [ 219]: REMOTE wants 3.85 line/mm<BR>Jun =
26=20
17:57:32.07: [ 219]: REMOTE wants 1-D MR<BR>Jun 26 17:57:32.07: [ 219]: =
--&gt;=20
[2:OK]<BR>Jun 26 17:57:32.07: [ 219]: &lt;-- [7:AT+FDR\r]<BR>Jun 26 =
17:57:34.06:=20
[ 219]: --&gt; [7:CONNECT]<BR>Jun 26 17:57:34.06: [ 219]: RECV: begin=20
page<BR>Jun 26 17:57:34.06: [ 219]: RECV: send trigger 022<BR>Jun 26=20
17:57:34.06: [ 219]: &lt;-- data [1]<BR>Jun 26 17:57:42.71: [ 219]: =
RECV: 15315=20
bytes of data, 1134 total lines<BR>Jun 26 17:57:42.82: [ 219]: --&gt;=20
[16:+FPS:1,471,0,0,0]<BR>Jun 26 17:57:42.99: [ 219]: --&gt; =
[7:CONNECT]<BR>Jun=20
26 17:57:47.36: [ 219]: --&gt; [2:=10=03]<BR>Jun 26 17:57:47.36: [ 219]: =
--&gt;=20
[14:+FPS:2,3,2,0,0]<BR>Jun 26 17:57:47.36: [ 219]: --&gt; =
[7:CONNECT]<BR>Jun 26=20
17:57:48.18: [ 219]: --&gt; [3:&Ntilde;=10=03]<BR>Jun 26 17:57:48.18: [ =
219]: --&gt;=20
[14:+FPS:2,6,5,0,0]<BR>Jun 26 17:57:51.34: [ 219]: --&gt; =
[7:CONNECT]<BR>Jun 26=20
17:57:52.36: [ 219]: --&gt; [3:=80=10=03]<BR>Jun 26 17:57:52.36: [ 219]: =
--&gt;=20
[14:+FPS:2,2,1,0,0]<BR>Jun 26 17:57:55.52: [ 219]: --&gt; =
[7:CONNECT]<BR>Jun 26=20
17:58:25.52: [ 219]: MODEM TIMEOUT: reading line from modem<BR>Jun 26=20
17:58:25.52: [ 219]: MODEM &lt;Timeout&gt;<BR>Jun 26 17:58:25.52: [ =
219]: REMOTE=20
HANGUP: Unspecified Phase C error, including too much delay between TCF =
and +FDR=20
command (code 90)<BR>Jun 26 17:58:25.53: [ 219]: RECV FAX (00000009):=20
recvq/fax00003.tif from 01721234567, route to &lt;unspecified&gt;, 0 =
pages in=20
0:58<BR>Jun 26 17:58:25.53: [ 219]: RECV FAX: Unspecified Phase C error, =

including too much delay between TCF and +FDR command<BR>Jun 26 =
17:58:25.53: [=20
219]: &lt;-- [7:AT+FKS\r]<BR>Jun 26 17:58:55.53: [ 219]: MODEM TIMEOUT: =
reading=20
line from modem<BR>Jun 26 17:58:55.53: [ 219]: MODEM =
&lt;Timeout&gt;<BR>Jun 26=20
17:58:55.53: [ 219]: RECV FAX (00000009): session with 01721234567 =
terminated=20
abnormally: Unspecified Phase C error, including too much delay between =
TCF and=20
+FDR command<BR>Jun 26 17:58:55.53: [ 219]: RECV FAX: bin/faxrcvd=20
&quot;recvq/fax00003.tif&quot; &quot;modem&quot; &quot;00000009&quot;=20
&quot;Unspecified Phase C error, including too much delay between TCF =
and +FDR=20
command&quot;<BR>Jun 26 17:58:56.66: [ 219]: RECV FAX: end<BR>Jun 26=20
17:58:56.66: [ 219]: SESSION END<BR># end of=20
file</FONT></FONT></FONT></DIV></BODY></HTML>

------=_NextPart_000_0021_01BFE3AC.469C6D40--





____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null