HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Re: Waiting for modem ready...



Double-check that you have the following:

run '/usr/sbin/ntsysv' and confirm that the hylafax line is ticked
review your /etc/inittab file and confirm that there is a faxgetty entry
If both of the above check out, then it very likely *is* the config file.
I've seen USR/3Com cases where restarting the process actually helps the
modem initialize.

Lee Howard


At 11:22 AM 7/3/00 +0200, Fabio Coatti wrote:
>I've the following setup: hylafax-4.1beta2 on a stock redhat 6.1 (Linux
>i386), configured as send-only, modem: Sportster 28.800 on ttyS1.
>
>I know that this modem is not the best one, but I don't think that my
>problem is related to it. It happens that when I start the faxserver (using
>the /etc/rc.d/init.d/hylafax start command),the faxstat command reports
>
>HylaFAX scheduler on myhost.mydomain: Running
>Modem ttyS1 (+390532730074): Waiting for modem to come ready
>
....



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions