![]() |
Hi fellows , Im using Hylafax for a week now, it is working well now but sometimes Im getting errors when I receive documents, Im really new in this world of Hylafax , sorry if my question is obvious ,Im sending you the logs of one of this failed attempts to receive a fax , I mean I can receive faxes from other faxmachines without problems , but when I try to receive faxes from this faxmachines I get errors (panasonic , sharp) I first thought that the problem were the senders but when they send their documents to a common fax machine I receive the document without problem , Can you help me please??
- To: alvaro@procacao.wintersperu.com.pe
- Subject: (Fwd) facsimile received from 51 1 336 8155
- From: "Alvaro Rosales R." <aran80@procacao.wintersperu.com.pe>
- Reply-to: aran80@procacao.wintersperu.com.pe
- Date: Thu, 15 Jun 2000 11:44:06 -0500
------- Forwarded message follows ------- Date sent: Thu, 15 Jun 2000 11:27:44 -0400 To: FaxMaster@octopus.wintersperu.com.pe From: The HylaFAX Receive Agent <fax@octopus.wintersperu.com.pe> Subject: facsimile received from 51 1 336 8155 recvq/fax00357.tif (ftp://octopus:4559/recvq/fax00357.tif): Sender: 51 1 336 8155 Pages: 1 Quality: Normal Page: ISO A4 Received: 2000:06:15 11:26:58 TimeToRecv: 0:45 SignalRate: 9600 bit/s DataFormat: 2-D MR ReceivedOn: ttyS2 The full document was not received because: Normal and proper end of connection ---- Transcript of session follows ---- Jun 15 11:26:44.32: [ 543]: SESSION BEGIN 00000744 113367901 Jun 15 11:26:44.32: [ 543]: <-- [4:ATA\r] Jun 15 11:26:52.64: [ 543]: --> [5:+FCON] Jun 15 11:26:52.64: [ 543]: ANSWER: FAX CONNECTION Jun 15 11:26:52.64: [ 543]: RECV FAX: begin Jun 15 11:26:54.27: [ 543]: --> [29:+FTSI: " 51 1 336 8155"] Jun 15 11:26:54.27: [ 543]: REMOTE TSI "51 1 336 8155" Jun 15 11:26:54.71: [ 543]: --> [22:+FDCS: 0,3,0,2,1,0,0,5] Jun 15 11:26:54.71: [ 543]: REMOTE wants 9600 bit/s Jun 15 11:26:54.71: [ 543]: REMOTE wants page width 1728 pixels in 215 mm Jun 15 11:26:54.71: [ 543]: REMOTE wants unlimited page length Jun 15 11:26:54.71: [ 543]: REMOTE wants 3.85 line/mm Jun 15 11:26:54.71: [ 543]: REMOTE wants 2-D MR Jun 15 11:26:54.71: [ 543]: --> [2:OK] Jun 15 11:26:54.71: [ 543]: <-- [7:AT+FDR\r] Jun 15 11:26:56.26: [ 543]: --> [5:+FCFR] Jun 15 11:26:58.30: [ 543]: --> [22:+FDCS: 0,3,0,2,1,0,0,5] Jun 15 11:26:58.30: [ 543]: REMOTE wants 9600 bit/s Jun 15 11:26:58.30: [ 543]: REMOTE wants page width 1728 pixels in 215 mm Jun 15 11:26:58.30: [ 543]: REMOTE wants unlimited page length Jun 15 11:26:58.30: [ 543]: REMOTE wants 3.85 line/mm Jun 15 11:26:58.30: [ 543]: REMOTE wants 2-D MR Jun 15 11:26:58.30: [ 543]: --> [7:CONNECT] Jun 15 11:26:58.30: [ 543]: RECV: begin page Jun 15 11:26:58.30: [ 543]: RECV: send trigger 022 Jun 15 11:27:39.37: [ 543]: RECV: 1125 total lines, 0 bad lines, 0 consecutive bad lines Jun 15 11:27:39.39: [ 543]: --> [17:+FPTS: 2,2219,0,0] Jun 15 11:27:40.82: [ 543]: --> [7:+FET: 0] Jun 15 11:27:40.82: [ 543]: RECV recv MPS (more pages, same document) Jun 15 11:27:40.82: [ 543]: --> [2:OK] Jun 15 11:27:40.82: [ 543]: RECV send MCF (message confirmation) Jun 15 11:27:40.83: [ 543]: RECV FAX (00000744): from 51 1 336 8155, page 1 in 0:46, INF, 3.85 line/mm, 2-D MR Jun 15 11:27:40.83: [ 543]: <-- [7:AT+FDR\r] Jun 15 11:27:43.79: [ 543]: --> [8:+FHNG: 0] Jun 15 11:27:43.79: [ 543]: REMOTE HANGUP: Normal and proper end of connection (code 0) Jun 15 11:27:43.80: [ 543]: RECV FAX (00000744): recvq/fax00357.tif from 51 1 336 8155, route to <unspecified>, 1 pages in 0:51 Jun 15 11:27:43.80: [ 543]: RECV FAX: Normal and proper end of connection Jun 15 11:27:43.80: [ 543]: RECV FAX (00000744): session with 51 1 336 8155 terminated abnormally: Normal and proper end of connection Jun 15 11:27:43.80: [ 543]: RECV FAX: bin/faxrcvd "recvq/fax00357.tif" "ttyS2" "00000744" "Normal and proper end of connection" ------- End of forwarded message ------- Alvaro Rosales Soporte Tecnico de Sistemas Procacao S.A. Av Maquinarias 2250 Lima-1 3368113 EXT 260 "GReat minds always share answers ,GReat assholes try to hide them"