[hylafax-users] Re: Still chopping white space out of middle of document

["David Kempe" <david@solutionsfirst.net>]

Sorry apached was broken.. Its fixed now. Please consider.

dave

> -----Original Message-----
> From: hylafax-users-bounce@hylafax.org
> [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of David Kempe
> Sent: Thursday, 15 June 2000 3:55 PM
> To: hylafax-users@hylafax.org
> Subject: [hylafax-users] Still chopping white space out of middle of
> document
>
>
> People,
> I'm still having this problem; The documents white space gets
> compressed or
> chopped in the middle of the document.
>
> At the end and it still faxed out like this:
> http://www.yourgateway.net/econf-faxed.pdf
> when it was printed from this:
> http://www.yourgateway.net/econfusion.pdf
>
> If someone could take the time to view these documents and tell me what is
> wrong, that would be great. Below is some configs, if there is
> any more info
> I can provide that would be great.
> I am printing off from Win2k server using the Apple LaserWriter 16/600 PS
> driver.
> I have tried the same from Win95 with the relevant Apple
> LaserWriter driver.
> Both going thru WHFC 1.06
>
> Thanks,
>
> Dave
>
>
> This is my config
> _____________
>
> LogFacility:            daemon
> CountryCode:            61
> AreaCode:               2
> LongDistancePrefix:     1
> InternationalPrefix:    011
> DialStringRules:        etc/dialrules
> ServerTracing:          1
> PageChop:               none
>
> My config.ttyS0
> __________________
> CountryCode:            61
> AreaCode:               2
> FAXNumber:              +61.2.98187711
> LongDistancePrefix:     1
> InternationalPrefix:    011
> DialStringRules:        etc/dialrules
> ServerTracing:          1
> SessionTracing:         11
> RecvFileMode:           0600
> LogFileMode:            0600
> DeviceMode:             0600
> RingsBeforeAnswer:      0
> SpeakerVolume:          off
> GettyArgs:              "-h %l dx_%s"
> LocalIdentifier:        Sydney.net
> TagLineFont:            etc/lutRS18.pcf
> TagLineFormat:          "From %%l|%c|Page %%p of %%t"
> MaxRecvPages:           25
> #
> #
> # Modem-related stuff: should reflect modem command interface
> # and hardware connection/cabling (e.g. flow control).
> #
> ModemType:              Class2          # use class 2 interface
> ModemRate:              38400
> ModemFlowControl:       rtscts          # default
> #
> #ModemResetCmds:        AT&F2           # what you want for a Supra
> ModemNoFlowCmd:         AT&K            # disable flow control cmd
> ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
> ModemSoftFlowCmd:       AT&K4           # software flow control cmd
> ModemSetupDTRCmd:       AT&D3           # DTR off causes modem to reset
> #ModemSetupDTRCmd:      AT&D2S25=1S38=0 # Dynalink 1414VE needs this
> ModemSetupDCDCmd:       AT&C1           # DCD follows carrier
> ModemSetupAACmd:        AT+FAA=1+FCLASS=0 # enable in current class
> #
> ModemSendFillOrder:     LSB2MSB         # as expected
> ModemRecvFillOrder:     MSB2LSB         # opposite of what makes sense
> #
> ModemAnswerFaxBeginCmd: "<19200><xon>"  # modem switches on fax receive
> #
> # Caller ID configuration setup for Supra.
> #
> #QualifyCID:            etc/cid         # CID access control list file
> #CIDNumber:             "NMBR = "       # pattern string for phone number
> info
> #CIDName:               "NAME = "       # pattern string for identity info
>
>
>
> ______________________________
> solutionsFirst.net Consulting
> http://solutionsfirst.net
> Ph: (02) 9555 4847
> Fax: (02) 9818 7711
> Mob: 0413 022 143
>
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org
> < /dev/null
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null