[hylafax-users] Re: Best Multi Modem Card

[George Liu <gliu@3inet.com>]

Hi Sven:

I use the downgrade driver and probelm has been solved. Thank you very much.

Do you have any idea why all my out-bound fax goes to one port, generally
first one I setup in faxaddmodem, and all other ports sit in idle?

Thank you again for your kind help.


Regards,
George

-----Original Message-----
From: srassmann.eurocom-depora@t-online.de
To: George Liu
Sent: 6/13/00 10:08 AM
Subject: Re: [hylafax-users] Re: Best Multi Modem Card

shall i send you my driver version ?


George Liu wrote:
> 
> Hi Sven:
> 
> Thank you very much for your message. The driver for the RAS comes
from
> 706-1001-Rev.103, Issue 4. That driver should works for Linux Kernel
> 2.0/2.2. No patch for that driver version. This driver can be
installed by
> running a script followed by rebuilding the linux kernel as previous
> procedure. The multiports go to ttyCH0 - ttyCH7 for 8 port RAS.
> 
> My problem is that only ttyCH0,1, 3-7 can work. To avoiding the
accident of
> physical defective board, I tried another board, and the result is
same.
> That should be nothing related to hylafax for I failed in "cu -l
ttyCHx".
> 
> I may try the previous driver.
> 
> Another problem is that the multiport modems don't work in rotatery
manner
> although they should work so. All outbound jobs are queued in a single
modem
> port and the other ports are just running in idle.
> 
> Thank you very much for your help.
> 
> Regards,
> George
> 
> -----Original Message-----
> From: srassmann.eurocom-depora@t-online.de
> To: George Liu
> Sent: 6/13/00 3:37 AM
> Subject: Re: [hylafax-users] Re: Best Multi Modem Card
> 
> Hi George,
> 
> sorry if i can't tell you to much, but i configured it nearly one year
> ago and it worked at once.
> but here the facts:
> 
> 1. i use driver version 1.7.1
> 2. the kernel patch is from FEB 99
> 3. on booting time the setserial driver gives me the two normal ports
as
> ttyS0 and ttyS1 and the multi-card is from ttyS4 up to 11
> 4. hylafax detects them as rockwell modems and configures them
_nearly_
> fine. just needed to change to hardware flowcontrol.
> 5. the card was bought in autum 99.
> 
> which driver-version are you using ? or where are the problems from ?
> 
> George Liu wrote:
> >
> > Hi Sven:
> >
> > Nice to know I have a helper. I used the modem driver Issue 4 (Chase
> > Research) and did auto installation for the RAS. The port 2 & 3
never
> worked
> > although they were assigned  serial ports when os boots up, which
are
> ttyCH1
> > & ttyCH2.
> >
> > Thank you in advance for your reply.
> >
> > Regards,
> > George


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null