HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Re: Unspecified Phase D Errors w/ Comtrol Rocket



If the Comtrol cards have problems with Hylafax, what multi-port serial comm
card *does* work with HylaFAX??? I'm looking at Digi, Cyclades and Stallion
products for a possible 8+ port solution.

I've read the board reviews at:
http://www2.linuxjournal.com/cgi-bin/frames.pl/index.php

Has anyone tried any of these and if so, were they good or bad with HylaFAX
(It'd be great if you could specify exact model numbers with your comments)?
Thanks.
ken
-----Original Message-----
From: wsuetholz@centonline.com [mailto:wsuetholz@centonline.com]
Sent: Wednesday, June 07, 2000 12:30 PM
To: Mark Lehrer
Cc: flexfax@sgi.com
Subject: [hylafax-users] Re: Unspecified Phase D Errors w/ Comtrol
Rocket


  Hey, I'm doing the same thing with a MultiTech for sending :-), 
I am, however, pressuring Comtrol for a solution, we resell their
boards, and if they can't fix this kind of problem, then we will
have to look at somebody elses multiport modem card.  MultiTech, Digi,
or Courier.  Only problem with those, is that I'd have to port the Linux
driver to Unixware not something I look forward to.

Bill Suetholz

On 07-Jun-00 Mark Lehrer wrote:
> 
> The solution is to use the Comtrol for sending, and a USR Sportster for
> receiving - it works perfectly.
> 
> Sorry for taking the easy way out.  8^)
> 
> Mark
> 
> 
> wsuetholz@centonline.com wrote:
> 
>> I have a similar problem with this device..  Are you using the
>> ISA version or the PCI version?  My problems were seen with VSI-FAX
>> and the ISA version of the card.  I haven't actually tried these
>> with HylaFAX.
>>
>> So, let me know if you get a resolution to this problem..
>>
>> Bill Suetholz
>>
>> On 07-Jun-00 Mark Lehrer wrote:
>> >
>> > Hello!  I have a comtrol rocketport 4-port card that is able to send
>> > faxes just fine.  However, when receiving faxes it gets 3-4 inches of
>> > the first page and then faxgetty exits with the following type of
>> > message:
>> >
>> > Jun  7 10:06:11 penguin FaxGetty[4789]: MODEM ROCKWELL
>> > AC/V34/V2.200G-V34_ACF_DS1
>> > Jun  7 10:06:18 penguin FaxGetty[4789]: ANSWER: FAX CONNECTION
>> > Jun  7 10:07:12 penguin FaxGetty[4789]: RECV FAX (00000039): from 801
>> > 268 2772, page 1 in 0:41, INF, 7.7 line/mm, 1-D MR
>> > Jun  7 10:07:19 penguin FaxGetty[4789]: RECV FAX (00000039):
>> > recvq/fax00017.tif from 801 268 2772, route to <unspecified>, 1 pages
in
>> > 1:01
>> > Jun  7 10:07:19 penguin FaxGetty[4789]: RECV FAX (00000039): session
>> > with 801 268 2772 terminated abnormally: Unspecified Phase D error
>> > Jun  7 10:07:19 penguin FaxGetty[4789]: RECV FAX: bin/faxrcvd
>> > "recvq/fax00017.tif" "ttyR0" "00000039" "Unspecified Phase D error"
>> >
>> >
>> > Any ideas on what I can do to make this work?
>> >
>> > Thanks!
>> > Mark Lehrer
>> >
> 

----------------------------------
E-Mail: wsuetholz@centonline.com
Date: 07-Jun-00
Time: 14:26:06

This message was sent by XFMail
----------------------------------


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions