HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Re: Unspecified Phase D Errors w/ Comtrol Rocket




The solution is to use the Comtrol for sending, and a USR Sportster for
receiving - it works perfectly.

Sorry for taking the easy way out.  8^)

Mark


wsuetholz@centonline.com wrote:

> I have a similar problem with this device..  Are you using the
> ISA version or the PCI version?  My problems were seen with VSI-FAX
> and the ISA version of the card.  I haven't actually tried these
> with HylaFAX.
>
> So, let me know if you get a resolution to this problem..
>
> Bill Suetholz
>
> On 07-Jun-00 Mark Lehrer wrote:
> >
> > Hello!  I have a comtrol rocketport 4-port card that is able to send
> > faxes just fine.  However, when receiving faxes it gets 3-4 inches of
> > the first page and then faxgetty exits with the following type of
> > message:
> >
> > Jun  7 10:06:11 penguin FaxGetty[4789]: MODEM ROCKWELL
> > AC/V34/V2.200G-V34_ACF_DS1
> > Jun  7 10:06:18 penguin FaxGetty[4789]: ANSWER: FAX CONNECTION
> > Jun  7 10:07:12 penguin FaxGetty[4789]: RECV FAX (00000039): from 801
> > 268 2772, page 1 in 0:41, INF, 7.7 line/mm, 1-D MR
> > Jun  7 10:07:19 penguin FaxGetty[4789]: RECV FAX (00000039):
> > recvq/fax00017.tif from 801 268 2772, route to <unspecified>, 1 pages in
> > 1:01
> > Jun  7 10:07:19 penguin FaxGetty[4789]: RECV FAX (00000039): session
> > with 801 268 2772 terminated abnormally: Unspecified Phase D error
> > Jun  7 10:07:19 penguin FaxGetty[4789]: RECV FAX: bin/faxrcvd
> > "recvq/fax00017.tif" "ttyR0" "00000039" "Unspecified Phase D error"
> >
> >
> > Any ideas on what I can do to make this work?
> >
> > Thanks!
> > Mark Lehrer
> >



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions