flexfax: Problems receiving faxes

[Alvaro Rosales <alvaro@procacao.wintersperu.com.pe>]

    Hello  friends Im using Hylafax with a internal modem  and it is
working ok , it works as a class2 modem I send  an receive OK  but when
I get faxes larger than 1 page I get a comunication error , can you help
me please ??

This is the error I get :

An attempt to receive facsimile on ttyS2 failed because:

    T.30 T2 timeout, expected page not received

    ---- Transcript of session follows ----

May 31 10:51:35.72: [ 1747]: SESSION BEGIN 00000294 113367901
May 31 10:51:35.72: [ 1747]: <-- [4:ATA\r]
May 31 10:51:58.75: [ 1747]: --> [5:+FCON]
May 31 10:51:58.75: [ 1747]: ANSWER: FAX CONNECTION
May 31 10:51:58.75: [ 1747]: RECV FAX: begin
May 31 10:52:00.38: [ 1747]: --> [29:+FTSI: "                    "]
May 31 10:52:00.38: [ 1747]: REMOTE TSI ""
May 31 10:52:00.82: [ 1747]: --> [22:+FDCS: 0,3,0,2,1,0,0,5]
May 31 10:52:00.82: [ 1747]: REMOTE wants 9600 bit/s
May 31 10:52:00.82: [ 1747]: REMOTE wants page width 1728 pixels in 215
mm
May 31 10:52:00.82: [ 1747]: REMOTE wants unlimited page length
May 31 10:52:00.82: [ 1747]: REMOTE wants 3.85 line/mm
May 31 10:52:00.82: [ 1747]: REMOTE wants 2-D MR
May 31 10:52:00.82: [ 1747]: --> [2:OK]
May 31 10:52:00.82: [ 1747]: <-- [7:AT+FDR\r]
May 31 10:52:02.44: [ 1747]: --> [5:+FCFR]
May 31 10:52:10.06: [ 1747]: --> [9:+FHNG: 73]
May 31 10:52:10.06: [ 1747]: REMOTE HANGUP: T.30 T2 timeout, expected
page not received (code 73)
May 31 10:52:10.06: [ 1747]: RECV FAX (00000294): recvq/fax00036.tif
from , route to <unspecified>, 0 pages in 0:12
May 31 10:52:10.06: [ 1747]: RECV FAX: T.30 T2 timeout, expected page
not received
May 31 10:52:10.06: [ 1747]: RECV FAX (00000294): session with
terminated abnormally: T.30 T2 timeout, expected page not received
May 31 10:52:10.06: [ 1747]: RECV FAX: bin/faxrcvd "recvq/fax00036.tif"
"ttyS2" "00000294" "T.30 T2 timeout, expected page not received"