RE: flexfax: 4.0pl2 on FreeBSD 4.0-STABLE

["Bernd Proissl" <news@proissl.de>]

have a look at
http://www.hylafax.org/patches/tiff-3.5-interfaces.patch


Bernd


> -----Original Message-----
> From: owner-flexfax@celestial.com [mailto:owner-flexfax@celestial.com]On
> Behalf Of Michael Lyngbøl
> Sent: Tuesday, May 30, 2000 12:00 PM
> To: flexfax@sgi.com
> Subject: flexfax: 4.0pl2 on FreeBSD 4.0-STABLE
>
>
> Hi,
>
> I'm trying to make HylaFax 4.0pl2 work on a FreeBSD/i386 4.0-STABLE
> system.
>
> I've installed HylaFax from ports-collection (/usr/ports/comm/hylafax),
> which worked fine.
>
> /usr/local/sbin/faxsetup has been used to setup the system.
>
> hfaxd is run out of inetd:
> lyngbol@ymer ~$ grep fax /etc/inetd.conf
> hylafax stream  tcp     nowait  fax     /usr/local/sbin/hfaxd   hfaxd -I
>
> faxq is started:
> lyngbol@ymer ~$ ps axu|grep fax
> uucp     27768  0.0  1.1  2192 1452  ??  Ss   11:27AM   0:00.02 faxq
>
> Feed the system some dummy fax:
> lyngbol@ymer ~$ sendfax -n -d 87303644 \
> /usr/share/doc/bind/misc/style.txt
> request id is 2 (group id 2) for host localhost (1 file)
> lyngbol@ymer ~$
>
> and nothing happend! why I havn't figured out. "faxstat -s" gives:
>
> lyngbol@ymer ~$ faxstat -s
> HylaFAX scheduler on ymer: Running
>
> JID  Pri S  Owner Number       Pages Dials     TTS Status
> 2    127 R lyngbo 87303644      0:0   0:12
> lyngbol@ymer ~$
>
> lyngbol@ymer ~$ top
> ...
>   PID USERNAME  PRI NICE  SIZE    RES STATE  C   TIME   WCPU    CPU
> COMMAND
> 28271 root       58   0  2300K  1520K CPU1   1   4:33 99.02% 99.02% faxq
> ...
>
> the above process just seems to have gone wild?
>
>
> root@ymer.pil.dk fax$ faxstate -s ready cuaa0
> FIFO.cuaa0: open: Device not configured
> root@ymer.pil.dk fax$
>
> why?
>
>
> System: FreeBSD/i386 4.0-STABLE (as of april 8th)
> modem: Microcom Deskporte S 33.6
>
> Any help would be appreciated!
>
> /Michael
>
>
>
>