HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Missing EOL



Hi there,

I am running Slackware 7.0, v2.2.13, hylafax 4.1beta2, whfc 1.0.7, prolink 
33.6 ext fax modem (remarked "Class2" in config.ttyS0), sending from/to 
Canon fax machine FAX-T21.
Everything works fine, can fax from server, can fax from win9x client using 
whfc 1.0.7.
However, the server cannot receive faxes. The error was "missing EOL".
I ran the patches and the error still exists. Everything else works as normal.

I checked the thread and saw that this "Missing EOL' is actually a bug.
I downloaded the protocol-rtn.patch by Dimtry Bely created on 29 Mar 00

I ran:-
patch -bp0 --verbose <protocol-rtn.patch (on the root of my hylafax 4.1beta2)
./configure
make
make install

I did not run the faxsetup as I think only the binary need patches and not 
the configuration settings. Do I need to re-run the faxsetup?

Anyone else faces this problem and have a fix for it?
Any suggestions/pointers would be greatly appreciated.

Best Regards,

Here is the log file
*********************
An attempt to receive facsimile on ttyS0 failed because:

Missing EOL after 5 seconds (section 3.2/T.4)

---- Transcript of session follows ----
May 20 00:28:37.24: [ 3823]: SESSION BEGIN 00000021 6565myfaxnumber
May 20 00:28:37.24: [ 3823]: <-- [4:ATA\r]
May 20 00:28:45.07: [ 3823]: --> [5:+FCON]
May 20 00:28:45.07: [ 3823]: ANSWER: FAX CONNECTION
May 20 00:28:45.07: [ 3823]: RECV FAX: begin
May 20 00:28:47.01: [ 3823]: --> [29:+FTSI: "myfaxnumber"]
May 20 00:28:47.01: [ 3823]: REMOTE TSI "myfaxnumber"
May 20 00:28:47.01: [ 3823]: --> [22:+FDCS: 0,3,0,2,0,0,0,3]
May 20 00:28:47.01: [ 3823]: REMOTE wants 9600 bit/s
May 20 00:28:47.01: [ 3823]: REMOTE wants page width 1728 pixels in 215 mm
May 20 00:28:47.01: [ 3823]: REMOTE wants unlimited page length
May 20 00:28:47.01: [ 3823]: REMOTE wants 3.85 line/mm
May 20 00:28:47.01: [ 3823]: REMOTE wants 1-D MR
May 20 00:28:49.07: [ 3823]: --> [2:OK]
May 20 00:28:49.07: [ 3823]: <-- [7:AT+FDR\r]
May 20 00:28:50.69: [ 3823]: --> [5:+FCFR]
May 20 00:28:50.69: [ 3823]: --> [22:+FDCS: 0,3,0,2,0,0,0,3]
May 20 00:28:50.69: [ 3823]: REMOTE wants 9600 bit/s
May 20 00:28:50.69: [ 3823]: REMOTE wants page width 1728 pixels in 215 mm
May 20 00:28:50.69: [ 3823]: REMOTE wants unlimited page length
May 20 00:28:50.69: [ 3823]: REMOTE wants 3.85 line/mm
May 20 00:28:50.69: [ 3823]: REMOTE wants 1-D MR
May 20 00:28:51.38: [ 3823]: --> [7:CONNECT]
May 20 00:28:51.38: [ 3823]: RECV: begin page
May 20 00:28:51.38: [ 3823]: RECV: send trigger 021
May 20 00:31:04.67: [ 3823]: RECV: Missing EOL after 5 seconds
May 20 00:31:04.67: [ 3823]: REMOTE HANGUP: Missing EOL after 5 seconds 
(section 3.2/T.4) (code 91)
May 20 00:31:04.67: [ 3823]: RECV FAX (00000021): recvq/fax00004.tif from 
myfaxnumber, route to <unspecified>, 0 pages in 2:19
May 20 00:31:04.67: [ 3823]: RECV FAX: Missing EOL after 5 seconds (section 
3.2/T.4)
May 20 00:31:04.67: [ 3823]: <-- [6:AT+FK\r]
May 20 00:31:04.80: [ 3823]: --> [2:OK]
May 20 00:31:04.80: [ 3823]: RECV FAX (00000021): session with myfaxnumber 
terminated abnormally: Missing EOL after 5 seconds (section 3.2/T.4)
May 20 00:31:04.80: [ 3823]: RECV FAX: bin/faxrcvd "recvq/fax00004.tif" 
"ttyS0" "00000021" "Missing EOL after 5 seconds (section 3.2/T.4)"


***************************************************************
"Don't be afraid to ask dumb questions, they are a lot easier to
  handle than dumb mistakes."
Email     : hkmun@pacific.net.sg
Home Page : http://home.pacific.net.sg/~hkmun
***************************************************************




Project hosted by iFAX Solutions