flexfax: Ring detect without successful handshake (code 1)

["Peter Robinson" <peterr@opensystems.net.au>]

I'm having problems with Hylafax running through a PABX,
if I try to send a fax to 93860400 I get the following (see bottom)
below is the excerpt from the dialrules file to add a 0, to the dialstring
to
get an outside line. If I just dial 400 (the internal fax extension) the fax
goes through fine.

Regards
Peter

DialString := [
[-${WS}.]+              =                       ! strip syntactic sugar
[abcABC]                = 2                     ! these convert alpha to
numbers
[defDEF]                = 3
[ghiGHI]                = 4
[jklJKL]                = 5
[mnoMNO]                = 6
[prsPRS]                = 7
[tuvTUV]                = 8
[wxyWXY]                = 9
^[+]${Country}         = ${LDPrefix}           ! long distance call
^[+]                   = ${IDPrefix}           ! international call
^[0-9]{7,}$             = 0,&                   ! Dial 0 to get outside line
]


Your facsimile job to 93860400 was not sent because:
    Ring detect without successful handshake

The job will be retried at 14:11.

    ---- Transcript of session follows ----

May 12 14:02:58.87: [14150]: SESSION BEGIN 00000017 610893860400
May 12 14:02:58.87: [14150]: SEND FAX: JOB 5 DEST 93860400 COMMID 00000017
May 12 14:02:58.87: [14150]: DELAY 2600 ms
May 12 14:03:01.47: [14150]: <-- [15:ATE0V1Q0S0=0H0\r]
May 12 14:03:01.48: [14150]: --> [2:OK]
May 12 14:03:01.48: [14150]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
May 12 14:03:01.50: [14150]: --> [2:OK]
May 12 14:03:01.50: [14150]: <-- [12:AT+FCLASS=2\r]
May 12 14:03:01.51: [14150]: --> [2:OK]
May 12 14:03:01.51: [14150]: <-- [10:AT+FTBC=0\r]
May 12 14:03:01.52: [14150]: --> [2:OK]
May 12 14:03:01.52: [14150]: <-- [10:AT+FBOR=0\r]
May 12 14:03:01.53: [14150]: --> [2:OK]
May 12 14:03:01.53: [14150]: <-- [13:AT+FPHCTO=30\r]
May 12 14:03:01.54: [14150]: --> [2:OK]
May 12 14:03:01.54: [14150]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
May 12 14:03:01.56: [14150]: --> [2:OK]
May 12 14:03:01.56: [14150]: <-- [5:ATM0\r]
May 12 14:03:01.57: [14150]: --> [2:OK]
May 12 14:03:01.57: [14150]: <-- [12:AT+FCLASS=2\r]
May 12 14:03:01.68: [14150]: --> [2:OK]
May 12 14:03:01.68: [14150]: <-- [10:AT+FTBC=0\r]
May 12 14:03:01.79: [14150]: --> [2:OK]
May 12 14:03:01.79: [14150]: <-- [10:AT+FBOR=0\r]
May 12 14:03:01.90: [14150]: --> [2:OK]
May 12 14:03:01.90: [14150]: <-- [13:AT+FPHCTO=30\r]
May 12 14:03:02.01: [14150]: --> [2:OK]
May 12 14:03:02.01: [14150]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
May 12 14:03:02.13: [14150]: --> [2:OK]
May 12 14:03:02.13: [14150]: <-- [31:AT+FLID="St Columba & Kingswo"\r]
May 12 14:03:02.25: [14150]: --> [2:OK]
May 12 14:03:02.25: [14150]: DIAL 0,93860400
May 12 14:03:02.25: [14150]: <-- [15:ATDT0,93860400\r]
May 12 14:04:09.75: [14150]: --> [8:+FHNG: 1]
May 12 14:04:09.75: [14150]: REMOTE HANGUP: Ring detect without successful
handshake (code 1)
May 12 14:04:09.75: [14150]: SEND FAILED: Ring detect without successful
handshake
May 12 14:04:09.75: [14150]: <-- [5:ATH0\r]
May 12 14:04:10.36: [14150]: --> [2:OK]
May 12 14:04:10.36: [14150]: SESSION END