![]() |
Hi Folks, i got SuseLinux6.3 faxstat -s is ok but it wont send i use whfc ideas ??? May 10 15:20:00 cs sshd[223]: log: RSA key generation complete. May 10 15:20:00 cs /usr/sbin/cron[229]: (CRON) STARTUP (fork ok) May 10 15:20:00 cs in.identd[233]: started May 10 15:20:01 cs FaxQueuer[274]: Missing ':' separator in modem group specification May 10 15:20:01 cs FaxQueuer[274]: HylaFAX (tm) Version 4.1beta2 May 10 15:20:01 cs FaxQueuer[274]: Copyright (c) 1990-1996 Sam Leffler May 10 15:20:01 cs FaxQueuer[274]: Copyright (c) 1991-1996 Silicon Graphics, Inc. May 10 15:20:02 cs HylaFAX[277]: HylaFAX INET Protocol Server: restarted. May 10 15:20:02 cs HylaFAX[277]: HylaFAX Old Protocol Server: restarted. May 10 15:20:02 cs HylaFAX[277]: HylaFAX SNPP Protocol Server: restarted. May 10 15:20:02 cs FaxGetty[287]: OPEN /dev/modem May 10 15:20:02 cs FaxGetty[287]: MODEM set DTR OFF May 10 15:20:02 cs FaxGetty[287]: DELAY 2600 ms May 10 15:20:05 cs FaxGetty[287]: MODEM set DTR ON May 10 15:20:05 cs FaxGetty[287]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS May 10 15:20:05 cs FaxGetty[287]: MODEM flush i/o May 10 15:20:05 cs FaxGetty[287]: <-- [15:ATE0V1Q0S0=0H0\r] May 10 15:20:05 cs FaxGetty[287]: --> [14:ATE0V1Q0S0=0H0] May 10 15:20:05 cs FaxGetty[287]: --> [2:OK] May 10 15:20:05 cs FaxGetty[287]: <-- [21:ATS8=2S7=60&K3&D3&C1\r] . . . May 10 15:20:07 cs FaxGetty[287]: --> [2:OK] May 10 15:20:07 cs FaxGetty[287]: <-- [18:AT+FAA=1+FCLASS=0\r] May 10 15:20:07 cs FaxGetty[287]: --> [2:OK] May 10 15:20:07 cs FaxGetty[287]: MODEM input buffering disabled May 10 15:20:07 cs FaxQueuer[274]: JOB 10 (active dest +494918002140 pri 126 tts 0:00 killtime 2:56:06): CMD START /usr/lib/fax/faxsend -m modem sendq/q10 (PID 288) May 10 15:20:07 cs FaxSend[288]: MODEM set DTR OFF May 10 15:20:07 cs FaxSend[288]: DELAY 2600 ms May 10 15:20:08 cs FaxGetty[287]: ANSWER: Can not lock modem device May 10 15:20:10 cs FaxSend[288]: MODEM set DTR ON May 10 15:20:10 cs FaxSend[288]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS May 10 15:20:10 cs FaxSend[288]: MODEM flush i/o May 10 15:20:10 cs FaxSend[288]: <-- [15:ATE0V1Q0S0=0H0\r] May 10 15:20:10 cs FaxSend[288]: --> [14:ATE0V1Q0S0=0H0] May 10 15:20:10 cs FaxSend[288]: --> [2:OK] . . . May 10 15:20:12 cs FaxSend[288]: --> [2:OK] May 10 15:20:12 cs FaxSend[288]: MODEM ROCKWELL AC/K56/F/W NO:8603-V90_2M_DLS May 10 15:20:12 cs FaxSend[288]: <-- [5:ATM0\r] May 10 15:20:12 cs FaxSend[288]: --> [2:OK] May 10 15:20:12 cs FaxSend[288]: MODEM input buffering disabled May 10 15:20:12 cs FaxSend[288]: SEND FAX: JOB 10 DEST 04918002140 COMMID 00000061 May 10 15:20:53 cs FaxSend[288]: SEND FAILED: Busy signal detected May 10 15:20:53 cs FaxQueuer[274]: JOB 10 (active dest +494918002140 pri 126 tts 0:00 killtime 2:55:20): CMD DONE: exit status 0 May 10 15:20:53 cs FaxQueuer[274]: JOB 10 (sleeping dest +494918002140 pri 125 tts 0:00 killtime 2:55:20): SEND INCOMPLETE: requeue for 3:00; Busy signal detected May 10 15:20:53 cs FaxQueuer[274]: NOTIFY: bin/notify "sendq/q10" "requeued" "" "15:23" May 10 15:21:02 cs login: cannot open login definitions /etc/login.defs [No such file or directory] May 10 15:21:02 cs login: cannot open login definitions /etc/login.defs [No such file or directory] May 10 15:21:07 cs login[281]: cannot open login definitions /etc/login.defs [No such file or directory] May 10 15:21:07 cs last message repeated 5 times May 10 15:21:08 cs FaxGetty[287]: MODEM set DTR OFF May 10 15:21:08 cs FaxGetty[287]: DELAY 2600 ms May 10 15:21:10 cs FaxGetty[287]: MODEM set DTR ON May 10 15:21:10 cs FaxGetty[287]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS May 10 15:21:10 cs FaxGetty[287]: MODEM flush i/o May 10 15:21:10 cs FaxGetty[287]: <-- [15:ATE0V1Q0S0=0H0\r] May 10 15:21:10 cs FaxGetty[287]: --> [2:OK] May 10 15:21:10 cs FaxGetty[287]: <-- [21:ATS8=2S7=60&K3&D3&C1\r] May 10 15:21:10 cs FaxGetty[287]: --> [2:OK] . . . . -- Sent through GMX FreeMail - http://www.gmx.net