HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Missing part of fax



"Steve Pratt" <steve@sheliak.co.uk> writes:

> I've just joined this list, so if this question has been previously asked,
> my apologies.
> Just installed SuSE6.4 with the distributed HylaFax, modem configured OK,
> SuSEFax running OK. However when the fax is sent, only a short page is
> received with the sending details, eg tel no, and station ID, but none of
> the ps file chosen for fax, this also happens using WHFC on a win98 machine.
> Otherwise everything looks like it is working.
> The faxsetup showed no errors, ie tiff3g etc was all there, and faxaddmodem
> ran through the modem without complaint. Processes fire up OK, and in the
> status window of both SuSEFax, and Whfc the server is shown initialising and
> running the modem connection. Remote end rings, answers, and starts to
> print, then before the actual content of the fax arrives the call ends and
> HylaFax claims the fax is sent.
> TIA for any clues.

Looks like the problems with flow control. Publish here your logs (with
tracing level = 0x7FF), and maybe then the reason of the fault will be
clear.

Hope to hear from you soon,
Dmitry





Project hosted by iFAX Solutions