flexfax: new installation problem, please help...

[HylaFax mail <flexfax@gaboon.gaboon.com>]

Hi!

I have recently installed hylafax-v4.0pl2 on a FreeBSD 3.4 -stable
system. Modem is a Telebit T3000. All seemed O.K. in both  incoming and
outbound faxing, until,

Only the first page of multiple page faxes gets received/printed. :-(

I unpreaded to ghostscript-6.01 with appropriate tiff configuration last
night. No change.

Any help/ideas will be greatly appreciated. I have to fix this quick!

TIA,


Stan
asv@gaboon.com




Here is the /var/spool/fax/log/c00000026 for this recieved fax:

Apr 07 06:18:00.98: [34253]: SESSION BEGIN 00000026 18604859460
Apr 07 06:18:01.00: [34253]: <-- [4:ATA\r]
Apr 07 06:18:31.65: [34253]: --> [5:+FCON]
Apr 07 06:18:31.65: [34253]: ANSWER: FAX CONNECTION
Apr 07 06:18:31.65: [34253]: RECV FAX: begin
Apr 07 06:18:33.66: [34253]: --> [28:+FTSI:"        203 758 8440"]
Apr 07 06:18:33.66: [34253]: REMOTE TSI "203 758 8440"
Apr 07 06:18:33.66: [34253]: --> [21:+FDCS:1,3,0,2,0,0,0,0]
Apr 07 06:18:33.66: [34253]: REMOTE wants 9600 bit/s
Apr 07 06:18:33.67: [34253]: REMOTE wants page width 1728 pixels in 215 mm
Apr 07 06:18:33.67: [34253]: REMOTE wants unlimited page length 
Apr 07 06:18:33.67: [34253]: REMOTE wants 7.7 line/mm
Apr 07 06:18:33.67: [34253]: REMOTE wants 1-D MR
Apr 07 06:18:33.92: [34253]: --> [2:OK]
Apr 07 06:18:33.92: [34253]: <-- [7:AT+FDR\r]
Apr 07 06:18:37.56: [34253]: --> [5:+FCFR]
Apr 07 06:18:37.56: [34253]: --> [21:+FDCS:1,3,0,2,0,0,0,0]
Apr 07 06:18:37.56: [34253]: REMOTE wants 9600 bit/s
Apr 07 06:18:37.56: [34253]: REMOTE wants page width 1728 pixels in 215 mm
Apr 07 06:18:37.56: [34253]: REMOTE wants unlimited page length 
Apr 07 06:18:37.56: [34253]: REMOTE wants 7.7 line/mm
Apr 07 06:18:37.56: [34253]: REMOTE wants 1-D MR
Apr 07 06:18:37.56: [34253]: --> [7:CONNECT]
Apr 07 06:18:37.56: [34253]: RECV: begin page
Apr 07 06:18:37.56: [34253]: RECV: send trigger 021
Apr 07 06:18:37.56: [34253]: <-- data [1]
Apr 07 06:19:18.89: [34253]: RECV: 2169 total lines, 0 bad lines, 0 consecutive bad lines
Apr 07 06:19:18.89: [34253]: --> [12:+FPTS:1,2170]
Apr 07 06:19:20.25: [34253]: --> [6:+FET:0]
Apr 07 06:19:20.25: [34253]: RECV recv MPS (more pages, same document)
Apr 07 06:19:20.25: [34253]: --> [2:OK]
Apr 07 06:19:20.27: [34253]: RECV send MCF (message confirmation)
Apr 07 06:19:20.27: [34253]: RECV FAX (00000026): from 203 758 8440, page 1 in 0:47, INF, 7.7 line/mm, 1-D MR
Apr 07 06:19:20.27: [34253]: <-- [7:AT+FDR\r]
Apr 07 06:19:22.49: [34253]: --> [7:CONNECT]
Apr 07 06:19:22.49: [34253]: RECV: begin page
Apr 07 06:19:22.49: [34253]: RECV: send trigger 021
Apr 07 06:19:22.49: [34253]: <-- data [1]
Apr 07 06:19:54.62: [34253]: RECV: 2229 total lines, 0 bad lines, 0 consecutive bad lines
Apr 07 06:19:54.62: [34253]: --> [12:+FPTS:1,2230]
Apr 07 06:19:56.09: [34253]: --> [6:+FET:2]
Apr 07 06:19:56.09: [34253]: RECV recv EOP (no more pages or documents)
Apr 07 06:19:56.09: [34253]: --> [2:OK]
Apr 07 06:19:56.09: [34253]: RECV send MCF (message confirmation)
Apr 07 06:19:56.09: [34253]: RECV FAX (00000026): from 203 758 8440, page 2 in 0:36, INF, 7.7 line/mm, 1-D MR
Apr 07 06:19:56.11: [34253]: RECV FAX (00000026): recvq/fax00007.tif from 203 758 8440, route to <unspecified>, 2 pages in 1:25
Apr 07 06:19:56.13: [34253]: <-- [7:AT+FDR\r]
Apr 07 06:19:59.46: [34253]: --> [7:+FHNG:0]
Apr 07 06:19:59.46: [34253]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Apr 07 06:19:59.46: [34253]: RECV FAX: bin/faxrcvd "recvq/fax00007.tif" "ttyd1" "00000026" ""
Apr 07 06:20:00.22: [34253]: RECV FAX: end
Apr 07 06:20:00.22: [34253]: SESSION END