HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

re: mailing of received faxes



Here's one of many things you can do:
#! /bin/sh
# $Id: faxrcvd.sh,v 1.1.1.1 1998/10/12 20:47:48 root Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics
#
# Permission to use, copy, modify, distribute, and sell this software
and
# its documentation for any purpose is hereby granted without fee,
provided
# that (i) the above copyright notices and this permission notice appear
in
# all copies of the software and related documentation, and (ii) the
names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or

# publicity relating to the software without the specific, prior written

# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY
KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,

# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY
OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE

# OF THIS SOFTWARE.
#

#
# faxrcvd file devID commID error-msg
#
if [ $# != 4 ]; then
    echo "Usage: $0 file devID commID error-msg"
    exit 1
fi

test -f etc/setup.cache || {
    SPOOL=`pwd`
    cat<<EOF

FATAL ERROR: $SPOOL/etc/setup.cache is missing!

The file $SPOOL/etc/setup.cache is not present.  This
probably means the machine has not been setup using the faxsetup(1M)
command.  Read the documentation on setting up HylaFAX before you
startup a server system.

EOF
    exit 1
}
. etc/setup.cache

INFO=$SBIN/faxinfo
FAX2PS=$TIFFBIN/fax2ps
TOADDR=FaxMaster
#
# There is no good portable way to find out the fully qualified
# domain name (FQDN) of the host or the TCP port for the hylafax
# service so we fudge here.  Folks may want to tailor this to
# their needs; e.g. add a domain or use localhost so the loopback
# interface is used.
#
HOSTNAME=`hostname`  # XXX no good way to find FQDN
PORT=4559    # XXX no good way to lookup service

FILE="$1"
DEVICE="$2"
COMMID="$3"
MSG="$4"

if [ -f $FILE ]; then
    #
    # Check the sender's TSI and setup to dispatch
    # facsimile received from well-known senders.
    #
    SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }'
2>/dev/null`"
    SENDTO=
    if [ -f etc/FaxDispatch ]; then
 . etc/FaxDispatch # NB: FaxDispatch sets SENDTO based on $SENDER
    fi
    (echo "To: $TOADDR"
     echo "From: The HylaFAX Receive Agent <fax>"
     echo "Subject: facsimile received from $SENDER";
     echo ""
     echo ; $INFO -n $FILE
     echo "ReceivedOn: $DEVICE"
     if [ "$MSG" ]; then
 echo ""
 echo "The full document was not received because:"
 echo ""
 echo "    $MSG"
 echo ""
 echo "    ---- Transcript of session follows ----"
 echo ""
 if [ -f log/c$COMMID ]; then
     $SED -e '/-- data/d' \
   -e '/start.*timer/d' -e '/stop.*timer/d' \
   log/c$COMMID
 elif [ -n "$COMMID" ]; then
     echo "    No transcript available (CommID c$COMMID)."
 else
     echo "    No transcript available."
 fi
     fi
     if [ -n "$SENDTO" ]; then
 echo ""
 echo "The facsimile was automatically dispatched to: $SENDTO."
     fi
    ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
    if [ -n "$SENDTO" ]; then
 (MIMEBOUNDARY="NextPart$$"
  echo "Mime-Version: 1.0"
  echo "Content-Type: Multipart/Mixed; Boundary=\"$MIMEBOUNDARY\""
  echo "Content-Transfer-Encoding: 7bit"
  echo "To: $SENDTO"
  echo "From: The HylaFAX Receive Agent <fax>"
  echo "Subject: facsimile received from $SENDER";
  echo ""
  echo "--$MIMEBOUNDARY"
  echo "Content-Type: text/plain; charset=us-ascii"
  echo "Content-Transfer-Encoding: 7bit"
  echo ""
  echo ; $INFO -n $FILE
  echo "ReceivedOn: $DEVICE"
  if [ "$MSG" ]; then
     echo ""
     echo "The full document was not received because:"
     echo ""
     echo "    $MSG"
     echo ""
     echo "    ---- Transcript of session follows ----"
     echo ""
     if [ -f log/c$COMMID ]; then
  $SED -e '/-- data/d' \
       -e '/start.*timer/d' -e '/stop.*timer/d' \
       log/c$COMMID
     elif [ -n "$COMMID" ]; then
  echo "    No transcript available (CommID c$COMMID)."
     else
  echo "    No transcript available."
     fi
  fi
  echo ""
  echo "--$MIMEBOUNDARY"
  echo "Content-Type: IMAGE/TIFF"
  echo "Content-Description: FAX document"
  echo "Content-Transfer-Encoding: BASE64"
  echo ""
  cat $FILE 2>/dev/null | /usr/bin/mmencode
  echo ""
  echo "--$MIMEBOUNDARY--"
 ) | 2>&1 $SENDMAIL -ffax -oi $SENDTO
    fi
else
    #
    # Generate notification mail for a failed attempt.
    #
    (echo "To: $TOADDR"
     echo "From: The HylaFAX Receive Agent <fax>"
     echo "Subject: facsimile not received"
     echo ""
     echo "An attempt to receive facsimile on $DEVICE failed because:"
     echo ""
     echo "    $MSG"
     echo ""
     echo "    ---- Transcript of session follows ----"
     echo ""
     if [ -f log/c$COMMID ]; then
 $SED -e '/-- data/d' \
      -e '/start.*timer/d' -e '/stop.*timer/d' \
     log/c$COMMID
     elif [ -n "$COMMID" ]; then
 echo "    No transcript available (CommID c$COMMID)."
     else
 echo "    No transcript available."
     fi
    ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
fi





Project hosted by iFAX Solutions