HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Error with USR Modem. Error Code 11



Hello together,

I get an error msg  like you can see it in the sniplet I have
pasted in here. The modem is dialing out fine but no connection
is established or whatever. I have found error 11 means :


 11     No answer (T.30 T1 time-out) (ERR_NOANSWERPHA) - This is
        not the same as the telepphone line failing to answer
        (Error Code 155) this is only seen if the DIALWAIT
        option is enabled in FAXSPROFILE - normally this is a
        fatal error and job will not retry

Can anbody explain mean me what this means and how I can correct
it? Or is this because of the USR modem only. Receiving faxes is
no problem at all.

Thanks in advance
Steve


> Feb 29 22:48:03.49: [20492]: SESSION BEGIN 00000077
496969694205
> Feb 29 22:48:03.49: [20492]: SEND FAX: JOB 26 DEST 06969694205
COMMID 00000077
> Feb 29 22:48:03.49: [20492]: DELAY 2600 ms
> Feb 29 22:48:06.09: [20492]: <-- [17:ATE0V1Q0X4S0=0H0\r]
> Feb 29 22:48:06.23: [20492]: --> [2:OK]
> Feb 29 22:48:06.23: [20492]: <--
[32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
> Feb 29 22:48:06.37: [20492]: --> [2:OK]
> Feb 29 22:48:06.37: [20492]: <-- [14:AT+FCLASS=2.0\r]
> Feb 29 22:48:06.51: [20492]: --> [2:OK]
> Feb 29 22:48:06.51: [20492]: <-- [9:AT+FLO=2\r]
> Feb 29 22:48:06.65: [20492]: --> [2:OK]
> Feb 29 22:48:06.65: [20492]: <-- [9:AT+FPP=0\r]
> Feb 29 22:48:06.79: [20492]: --> [2:OK]
> Feb 29 22:48:06.79: [20492]: <-- [9:AT+FBO=0\r]
> Feb 29 22:48:06.93: [20492]: --> [2:OK]
> Feb 29 22:48:06.93: [20492]: <-- [10:AT+FCT=30\r]
> Feb 29 22:48:07.07: [20492]: --> [2:OK]
> Feb 29 22:48:07.07: [20492]: <-- [15:AT+FNR=1,1,1,0\r]
> Feb 29 22:48:07.21: [20492]: --> [2:OK]
> Feb 29 22:48:07.21: [20492]: <-- [9:AT+FIE=0\r]
> Feb 29 22:48:07.35: [20492]: --> [2:OK]
> Feb 29 22:48:07.35: [20492]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Feb 29 22:48:07.49: [20492]: --> [2:OK]
> Feb 29 22:48:07.49: [20492]: <-- [5:ATM1\r]
> Feb 29 22:48:07.62: [20492]: --> [2:OK]
> Feb 29 22:48:07.62: [20492]: <-- [14:AT+FCLASS=2.0\r]
> Feb 29 22:48:07.86: [20492]: --> [2:OK]
> Feb 29 22:48:07.86: [20492]: <-- [9:AT+FLO=2\r]
> Feb 29 22:48:08.10: [20492]: --> [2:OK]
> Feb 29 22:48:08.10: [20492]: <-- [9:AT+FPP=0\r]
> Feb 29 22:48:08.34: [20492]: --> [2:OK]
> Feb 29 22:48:08.34: [20492]: <-- [9:AT+FBO=0\r]
> Feb 29 22:48:08.58: [20492]: --> [2:OK]
> Feb 29 22:48:08.58: [20492]: <-- [10:AT+FCT=30\r]
> Feb 29 22:48:08.82: [20492]: --> [2:OK]
> Feb 29 22:48:08.82: [20492]: <-- [15:AT+FNR=1,1,1,0\r]
> Feb 29 22:48:09.06: [20492]: --> [2:OK]
> Feb 29 22:48:09.06: [20492]: <-- [9:AT+FIE=0\r]
> Feb 29 22:48:09.30: [20492]: --> [2:OK]
> Feb 29 22:48:09.30: [20492]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Feb 29 22:48:09.54: [20492]: --> [2:OK]
> Feb 29 22:48:09.54: [20492]: <-- [22:AT+FLI="NothingSetup"\r]
> Feb 29 22:48:09.78: [20492]: --> [2:OK]
> Feb 29 22:48:09.78: [20492]: DIAL 06969694205
> Feb 29 22:48:09.78: [20492]: <-- [21:ATX3DT0w06969694205@\r]
> Feb 29 22:48:58.62: [20492]: --> [7:+FHS:11]
> Feb 29 22:48:58.62: [20492]: REMOTE HANGUP: No answer (T.30 T1
timeout) (code 11)
> Feb 29 22:48:58.62: [20492]: SEND FAILED: No answer (T.30 T1
timeout)
> Feb 29 22:48:58.62: [20492]: <-- [5:ATH0\r]
> Feb 29 22:48:58.75: [20492]: --> [2:OK]
> Feb 29 22:48:58.75: [20492]: SESSION END
>
>




Project hosted by iFAX Solutions