HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

received fax contains only first page



Hi!

The problem is the subject 8-). When such fax is coming that has many
pages (more than one) after successfully receiving the stored .tif only
contains the first page of the fax. The log says OK, 2 or more pages was
received but doesn't store it anyway. Sorry for the long log but I don't
know which part can be important.


-------------- cut ---------------

Feb 17 10:15:42.45: [  485]: SESSION BEGIN 00000044 3694513644
Feb 17 10:15:42.45: [  485]: <-- [4:ATA\r]
Feb 17 10:15:47.61: [  485]: --> [7:CONNECT]
Feb 17 10:15:47.61: [  485]: ANSWER: FAX CONNECTION
Feb 17 10:15:47.61: [  485]: MODEM input buffering enabled
Feb 17 10:15:47.61: [  485]: RECV FAX: begin
Feb 17 10:15:47.61: [  485]: MODEM input buffering disabled
Feb 17 10:15:47.61: [  485]: <-- HDLC<23:FF C0 02 2C 2C 6C B4 CC 8C AC
F4 2C 9C 04 6C CC D4 04 04 04 04 04 04>
Feb 17 10:15:47.61: [  485]: <-- data [23]
Feb 17 10:15:47.61: [  485]: <-- data [2]
Feb 17 10:15:48.75: [  485]: --> [7:CONNECT]
Feb 17 10:15:48.75: [  485]: <-- HDLC<10:FF C8 01 00 77 5F 01 79 03 C0>
Feb 17 10:15:48.75: [  485]: <-- data [10]
Feb 17 10:15:48.75: [  485]: <-- data [2]
Feb 17 10:15:49.20: [  485]: --> [2:OK]
Feb 17 10:15:49.20: [  485]: <-- [9:AT+FRH=3\r]
Feb 17 10:15:52.30: [  485]: --> [0:]
Feb 17 10:15:52.30: [  485]: MODEM <Empty line>
Feb 17 10:15:52.30: [  485]: MODEM TIMEOUT: waiting for v.21 carrier
Feb 17 10:15:52.30: [  485]: <-- data [1]
Feb 17 10:15:52.31: [  485]: --> [2:OK]
Feb 17 10:15:52.31: [  485]: DELAY 1500 ms
Feb 17 10:15:53.81: [  485]: <-- [9:AT+FTH=3\r]
Feb 17 10:15:53.95: [  485]: --> [7:CONNECT]
Feb 17 10:15:53.95: [  485]: <-- HDLC<23:FF C0 02 2C 2C 6C B4 CC 8C AC
F4 2C 9C 04 6C CC D4 04 04 04 04 04 04>
Feb 17 10:15:53.95: [  485]: <-- data [23]
Feb 17 10:15:53.95: [  485]: <-- data [2]
Feb 17 10:15:55.19: [  485]: --> [7:CONNECT]
Feb 17 10:15:55.19: [  485]: <-- HDLC<10:FF C8 01 00 77 5F 01 79 03 C0>
Feb 17 10:15:55.19: [  485]: <-- data [10]
Feb 17 10:15:55.19: [  485]: <-- data [2]
Feb 17 10:15:55.64: [  485]: --> [2:OK]
Feb 17 10:15:55.64: [  485]: <-- [9:AT+FRH=3\r]
Feb 17 10:15:56.14: [  485]: --> [7:CONNECT]
Feb 17 10:15:57.94: [  485]: --> HDLC<25:FF C0 C2 0C AC 1C 0C 8C AC 04
2C 9C 04 6C CC 04 04 04 04 04 04 04 04 4D 09>
Feb 17 10:15:57.95: [  485]: --> [2:OK]
Feb 17 10:15:57.95: [  485]: REMOTE TSI "36 94 510850"
Feb 17 10:15:57.95: [  485]: <-- [9:AT+FRH=3\r]
Feb 17 10:15:57.98: [  485]: --> [7:CONNECT]
Feb 17 10:15:58.28: [  485]: --> HDLC<9:FF C8 C1 00 61 1F 00 3E CD>
Feb 17 10:15:58.28: [  485]: --> [2:OK]
Feb 17 10:15:58.28: [  485]: REMOTE wants 9600 bit/s
Feb 17 10:15:58.28: [  485]: REMOTE wants page width 1728 pixels in 215
mm
Feb 17 10:15:58.28: [  485]: REMOTE wants unlimited page length 
Feb 17 10:15:58.28: [  485]: REMOTE wants 3.85 line/mm
Feb 17 10:15:58.28: [  485]: REMOTE wants 2-D MR
Feb 17 10:15:58.28: [  485]: RECV training at v.29 9600 bit/s
Feb 17 10:15:58.28: [  485]: <-- [10:AT+FRM=96\r]
Feb 17 10:15:58.86: [  485]: --> [7:CONNECT]
Feb 17 10:16:00.39: [  485]: RECV: TCF 1824 bytes, 22% non-zero, 1179
zero-run
Feb 17 10:16:00.39: [  485]: RECV: reject TCF (too many non-zero, max
10%)
Feb 17 10:16:00.39: [  485]: RECV: reject TCF (zero run too short, min
1200)
Feb 17 10:16:00.40: [  485]: --> [10:NO CARRIER]
Feb 17 10:16:00.40: [  485]: DELAY 75 ms
Feb 17 10:16:00.48: [  485]: <-- [9:AT+FTH=3\r]
Feb 17 10:16:00.62: [  485]: --> [7:CONNECT]
Feb 17 10:16:00.62: [  485]: <-- HDLC<3:FF C8 22>
Feb 17 10:16:00.62: [  485]: <-- data [3]
Feb 17 10:16:00.62: [  485]: <-- data [2]
Feb 17 10:16:01.36: [  485]: --> [2:OK]
Feb 17 10:16:01.36: [  485]: TRAINING failed
Feb 17 10:16:01.36: [  485]: <-- [9:AT+FRH=3\r]
Feb 17 10:16:01.88: [  485]: --> [7:CONNECT]
Feb 17 10:16:03.68: [  485]: --> HDLC<25:FF C0 C2 0C AC 1C 0C 8C AC 04
2C 9C 04 6C CC 04 04 04 04 04 04 04 04 4D 09>
Feb 17 10:16:03.68: [  485]: --> [2:OK]
Feb 17 10:16:03.68: [  485]: REMOTE TSI "36 94 510850"
Feb 17 10:16:03.68: [  485]: <-- [9:AT+FRH=3\r]
Feb 17 10:16:03.71: [  485]: --> [7:CONNECT]
Feb 17 10:16:04.01: [  485]: --> HDLC<9:FF C8 C1 00 71 1F 00 7D AE>
Feb 17 10:16:04.01: [  485]: --> [2:OK]
Feb 17 10:16:04.01: [  485]: REMOTE wants 7200 bit/s
Feb 17 10:16:04.01: [  485]: REMOTE wants page width 1728 pixels in 215
mm
Feb 17 10:16:04.01: [  485]: REMOTE wants unlimited page length 
Feb 17 10:16:04.01: [  485]: REMOTE wants 3.85 line/mm
Feb 17 10:16:04.01: [  485]: REMOTE wants 2-D MR
Feb 17 10:16:04.01: [  485]: RECV training at v.29 7200 bit/s
Feb 17 10:16:04.01: [  485]: <-- [10:AT+FRM=72\r]
Feb 17 10:16:04.59: [  485]: --> [7:CONNECT]
Feb 17 10:16:06.12: [  485]: RECV: TCF 1376 bytes, 0% non-zero, 1364
zero-run
Feb 17 10:16:06.12: [  485]: --> [10:NO CARRIER]
Feb 17 10:16:06.12: [  485]: DELAY 75 ms
Feb 17 10:16:06.20: [  485]: <-- [9:AT+FTH=3\r]
Feb 17 10:16:06.34: [  485]: --> [7:CONNECT]
Feb 17 10:16:06.34: [  485]: <-- HDLC<3:FF C8 21>
Feb 17 10:16:06.34: [  485]: <-- data [3]
Feb 17 10:16:06.34: [  485]: <-- data [2]
Feb 17 10:16:07.08: [  485]: --> [2:OK]
Feb 17 10:16:07.08: [  485]: TRAINING succeeded
Feb 17 10:16:07.08: [  485]: MODEM input buffering enabled
Feb 17 10:16:07.08: [  485]: <-- [10:AT+FRM=72\r]
Feb 17 10:16:07.91: [  485]: --> [7:CONNECT]
Feb 17 10:16:07.91: [  485]: RECV: begin page
Feb 17 10:16:34.41: [  485]: RECV: 1149 total lines, 0 bad lines, 0
consecutive bad lines
Feb 17 10:16:34.41: [  485]: RECV: end page
Feb 17 10:16:34.41: [  485]: --> [10:NO CARRIER]
Feb 17 10:16:34.41: [  485]: MODEM input buffering disabled
Feb 17 10:16:34.41: [  485]: <-- [9:AT+FRH=3\r]
Feb 17 10:16:34.46: [  485]: --> [7:CONNECT]
Feb 17 10:16:35.65: [  485]: --> HDLC<5:FF C8 F2 AC A0>
Feb 17 10:16:35.65: [  485]: --> [2:OK]
Feb 17 10:16:35.65: [  485]: RECV recv MPS (more pages, same document)
Feb 17 10:16:35.65: [  485]: <-- [9:AT+FTH=3\r]
Feb 17 10:16:35.79: [  485]: --> [7:CONNECT]
Feb 17 10:16:35.79: [  485]: <-- HDLC<3:FF C8 31>
Feb 17 10:16:35.79: [  485]: <-- data [3]
Feb 17 10:16:35.79: [  485]: <-- data [2]
Feb 17 10:16:36.53: [  485]: --> [2:OK]
Feb 17 10:16:36.53: [  485]: RECV send MCF (message confirmation)
Feb 17 10:16:36.53: [  485]: RECV FAX (00000044): from 36 94 510850,
page 1 in 0:29, INF, 3.85 line/mm, 2-D MR
Feb 17 10:16:36.53: [  485]: MODEM input buffering enabled
Feb 17 10:16:36.53: [  485]: <-- [10:AT+FRM=72\r]
Feb 17 10:16:42.53: [  485]: --> [7:CONNECT]
Feb 17 10:16:42.53: [  485]: RECV: begin page
Feb 17 10:17:10.16: [  485]: RECV: 1144 total lines, 0 bad lines, 0
consecutive bad lines
Feb 17 10:17:10.16: [  485]: RECV: end page
Feb 17 10:17:10.16: [  485]: --> [10:NO CARRIER]
Feb 17 10:17:10.16: [  485]: MODEM input buffering disabled
Feb 17 10:17:10.16: [  485]: <-- [9:AT+FRH=3\r]
Feb 17 10:17:10.21: [  485]: --> [7:CONNECT]
Feb 17 10:17:11.40: [  485]: --> HDLC<5:FF C8 F4 CC 66>
Feb 17 10:17:11.40: [  485]: --> [2:OK]
Feb 17 10:17:11.40: [  485]: RECV recv EOP (no more pages or documents)
Feb 17 10:17:11.40: [  485]: <-- [9:AT+FTH=3\r]
Feb 17 10:17:11.55: [  485]: --> [7:CONNECT]
Feb 17 10:17:11.55: [  485]: <-- HDLC<3:FF C8 31>
Feb 17 10:17:11.55: [  485]: <-- data [3]
Feb 17 10:17:11.55: [  485]: <-- data [2]
Feb 17 10:17:12.29: [  485]: --> [2:OK]
Feb 17 10:17:12.29: [  485]: RECV send MCF (message confirmation)
Feb 17 10:17:12.29: [  485]: RECV FAX (00000044): from 36 94 510850,
page 2 in 0:36, INF, 3.85 line/mm, 2-D MR
Feb 17 10:17:12.29: [  485]: RECV FAX (00000044): recvq/fax00050.tif
from 36 94 510850, route to <unspecified>, 2 pages in 1:25
Feb 17 10:17:12.29: [  485]: <-- [9:AT+FRH=3\r]
Feb 17 10:17:12.80: [  485]: --> [7:CONNECT]
Feb 17 10:17:14.06: [  485]: --> HDLC<5:FF C8 DF 59 6F>
Feb 17 10:17:14.07: [  485]: --> [2:OK]
Feb 17 10:17:14.07: [  485]: MODEM input buffering enabled
Feb 17 10:17:14.07: [  485]: RECV FAX: bin/faxrcvd "recvq/fax00050.tif"
"modem" "00000044" ""
Feb 17 10:17:14.73: [  485]: RECV FAX: end
Feb 17 10:17:14.73: [  485]: SESSION END
-------------- cut ---------------

TIA and by., Sanya


ps: please cc to my private box too.


-- 
...Feher Sandor... mailto:fehers@freemail.hu http://w3.swi.hu/sfeher




Project hosted by iFAX Solutions