HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: fax sent but didn't get to destination



Lan Tran wrote:
> 
> Hi,
> 
> I have Multi-Tech 14.4 modem.  I'm running on FreeBSD 3.4 with
> Hylafax4.0pre12.
> I try sending a fax to a local fax machine and "faxstat" says "sending job
> #..".
> However, there was no fax on my fax machine.  Do my faxes just get lost?
> HELP!
> 
> L.T.

HylaFAX says "sending job #..." when *trying* to send the job. This is
*no* proof that the fax is really being sent!

- Does your fax-machine "ring" ?
- Does your fax-machine show any connect/error?
- Have you dialed the correct phone-number of your fax-machine?
- Can you connect with your modem to your local fax-machine using "cu
-l<device>" or something similiar?
- Have a look into your ../spool/log ../spool/sendq ../spool/doneq
directories!

and

- what does "../sbin/faxwatch S*" say when sending a fax ???

I hope I gave you some starting points...
best regards
rick




-- 
snail: 	ANZER GmbH - Pieperstr. 14 - 32791 Lage - Germany
email: 	rick_@t-online.de
voice:	(0049) 5232 / 9777-21
fax:	(0049) 5232 / 78094




Project hosted by iFAX Solutions