flexfax: [Hylafax] Questions & Problems

[Famille Chauvat <philippe.chauvat@usa.net>]

Hello,

1 question, 2 problems.

first: why, when the remote fax say "Ok to 2-D MR", hylafax use 1-D MR ?

questions now:
i tried many times to send faxes, and the response is always the same:
--> the remote machine does'nt repond to MPS or EOM (see messages
bellow).

Thanks a lot for your help.

Philippe.

>>> 2-D MR
Jan 29 23:31:50.31: [ 6458]: --> [20:+FIS:1,3,0,2,1,0,0,4]
Jan 29 23:31:50.31: [ 6458]: --> [2:OK]
Jan 29 23:31:50.31: [ 6458]: REMOTE best rate 9600 bit/s
Jan 29 23:31:50.31: [ 6458]: REMOTE max page width 1728 pixels in 215 mm
Jan 29 23:31:50.31: [ 6458]: REMOTE max unlimited page length 
Jan 29 23:31:50.31: [ 6458]: REMOTE best vres 7.7 line/mm
Jan 29 23:31:50.31: [ 6458]: REMOTE best format 2-D MR
Jan 29 23:31:50.31: [ 6458]: REMOTE best 20 ms, 10 ms/scanline
Jan 29 23:31:50.31: [ 6458]: USE 9600 bit/s
Jan 29 23:31:50.31: [ 6458]: USE 20 ms, 10 ms/scanline
Jan 29 23:31:50.31: [ 6458]: SEND file "docq/doc102.ps;31"
Jan 29 23:31:50.39: [ 6458]: USE page width 1728 pixels in 215 mm
Jan 29 23:31:50.39: [ 6458]: USE unlimited page length 
Jan 29 23:31:50.39: [ 6458]: USE 7.7 line/mm
Jan 29 23:31:50.39: [ 6458]: USE 1-D MR
<<<<< -----

and now repons ...

1/
Jan 29 23:25:39.77: [ 6406]: <-- data [1025]
Jan 29 23:25:41.65: [ 6406]: <-- data [1025]
Jan 29 23:25:41.65: [ 6406]: <-- data [1030]
Jan 29 23:25:43.83: [ 6406]: <-- data [1024]
Jan 29 23:25:43.83: [ 6406]: <-- data [369]
Jan 29 23:25:43.83: [ 6406]: SENT 34161 bytes of data
Jan 29 23:25:43.83: [ 6406]: SEND 1D RTC
Jan 29 23:25:43.83: [ 6406]: <-- data [9]
Jan 29 23:25:43.83: [ 6406]: SEND end page
Jan 29 23:25:43.83: [ 6406]: SEND send MPS (more pages, same document)
Jan 29 23:25:43.83: [ 6406]: <-- data [2]
Jan 29 23:26:06.68: [ 6406]: --> [7:+FHS:52]
Jan 29 23:26:06.68: [ 6406]: REMOTE HANGUP: No response to MPS repeated
3 times (code 52)
Jan 29 23:26:06.68: [ 6406]: <-- [5:ATH0\r]
Jan 29 23:26:06.80: [ 6406]: --> [2:OK]
Jan 29 23:26:06.80: [ 6406]: SESSION END



2/
Jan 29 23:10:39.43: [ 6164]: <-- data [1025]
Jan 29 23:10:39.43: [ 6164]: <-- data [1028]
Jan 29 23:10:41.31: [ 6164]: <-- data [1025]
Jan 29 23:10:41.31: [ 6164]: <-- data [1025]
Jan 29 23:10:43.24: [ 6164]: <-- data [1024]
Jan 29 23:10:43.24: [ 6164]: <-- data [1025]
Jan 29 23:10:45.11: [ 6164]: <-- data [1024]
Jan 29 23:10:45.11: [ 6164]: <-- data [25]
Jan 29 23:10:45.11: [ 6164]: SENT 37913 bytes of data
Jan 29 23:10:45.11: [ 6164]: SEND 1D RTC
Jan 29 23:10:45.11: [ 6164]: <-- data [9]
Jan 29 23:10:45.11: [ 6164]: SEND end page
Jan 29 23:10:45.11: [ 6164]: SEND send EOP (no more pages or documents)
Jan 29 23:10:45.11: [ 6164]: <-- data [2]
Jan 29 23:11:07.60: [ 6164]: --> [7:+FHS:54]
Jan 29 23:11:07.60: [ 6164]: REMOTE HANGUP: No response to EOP repeated
3 times (code 54)
Jan 29 23:11:07.60: [ 6164]: <-- [5:ATH0\r]
Jan 29 23:11:07.73: [ 6164]: --> [2:OK]
Jan 29 23:11:07.73: [ 6164]: SESSION END