flexfax: WHFC "Done Queue" freeze problem in NT4

[Jari Hiltunen <jarihi@kpnqwest.fi>]

Dear All,

I have a problem with WHFC freezing on WinNT4 when I hit the "Display Send
Queue" icon.

I have installed and tried WHFC 1.0.5 and WHFC 1.1.0 on two Windows NT 4
Workstations (SP3 on one, and SP5 on the other). WHFC installs correctly
and I am able to send faxes via HylaFAX. However, every time I click the
"Done Queue" icon in WHFC the program completely freezes and I have to use
Windows Task Manager to kill WHFC. I have also tried running the 1.0.5
debug version but I get no log entries about this lockup.

I am running HylaFAX (tm) Version 4.0pl1 on Solaris. "faxstat -d" works
perfectly on the Solaris server where HylaFAX is installed. Also "faxstat
-d" works prefectly if I run it on another Solaris server with the -h
option. 

This is what happens on the HylaFAX server when I hit the "Done Queue" in
WHFC:

Jan 14 13:32:53 xxx HylaFAX[10192]: servertracing = 0x00102 (line 12)
Jan 14 13:32:53 xxx HylaFAX[10192]: faxcontact = root (line 19)
Jan 14 13:32:53 xxx HylaFAX[10192]: useraccessfile = /etc/hosts (line 20)
Jan 14 13:32:53 xxx HylaFAX[10192]: xferlogfile = /etc/clientlog (line 22)
Jan 14 13:32:53 xxx HylaFAX[10192]: <--- 220 xxx.eunet.fi server (HylaFAX (tm) Version 4.0pl1) ready.
Jan 14 13:32:53 xxx HylaFAX[10192]: command: USER jarihi
Jan 14 13:32:53 xxx HylaFAX[10192]: USER jarihi
Jan 14 13:32:53 xxx HylaFAX[10192]: <--- 230 User jarihi logged in.
Jan 14 13:32:53 xxx HylaFAX[10192]: command: TZONE LOCAL
Jan 14 13:32:53 xxx HylaFAX[10192]: TZONE LOCAL
Jan 14 13:32:53 xxx HylaFAX[10192]: <--- 200 Using time values in EET.
Jan 14 13:32:53 xxx HylaFAX[10192]: command: TYPE I
Jan 14 13:32:53 xxx HylaFAX[10192]: TYPE I
Jan 14 13:32:53 xxx HylaFAX[10192]: <--- 200 Type set to Image.
Jan 14 13:32:53 xxx HylaFAX[10192]: command: MODE S
Jan 14 13:32:53 xxx HylaFAX[10192]: MODE S
Jan 14 13:32:53 xxx HylaFAX[10192]: <--- 200 Mode set to Stream.
Jan 14 13:32:53 xxx HylaFAX[10192]: command: PORT 193,66,4,90,7,211
Jan 14 13:32:53 xxx HylaFAX[10192]: PORT 193.66.4.90;2003
Jan 14 13:32:53 xxx HylaFAX[10192]: <--- 200 PORT command successful.
Jan 14 13:32:53 xxx HylaFAX[10192]: command: LIST status
Jan 14 13:32:53 xxx HylaFAX[10192]: LIST status
Jan 14 13:32:53 xxx HylaFAX[10192]: <--- 150 Opening new data connection for "status".
Jan 14 13:32:53 xxx HylaFAX[10192]: <--- 226 Transfer complete.
Jan 14 13:32:53 xxx HylaFAX[10192]: command: JOBFMT "%-4j %3i %1a %6.6o %12.12e %5P %5D %7z %.30s"
Jan 14 13:32:53 xxx HylaFAX[10192]: <--- 200 JOBFMT command successful.
Jan 14 13:32:53 xxx HylaFAX[10192]: command: PORT 193,66,4,90,7,212
Jan 14 13:32:53 xxx HylaFAX[10192]: PORT 193.66.4.90;2004
Jan 14 13:32:53 xxx HylaFAX[10192]: <--- 200 PORT command successful.
Jan 14 13:32:53 xxx HylaFAX[10192]: command: LIST doneq
Jan 14 13:32:53 xxx HylaFAX[10192]: LIST doneq
Jan 14 13:32:53 xxx HylaFAX[10192]: <--- 150 Opening new data connection for "doneq".
Jan 14 13:34:01 xxx HylaFAX[10192]: Lost connection to taco.eunet.fi [193.66.4.90]

The last "Lost connection" line occurred when I terminated WHFC on WinNT.

Any ideas? I am puzzled...

Regards,

Jari Hiltunen, IT Manager              jari.hiltunen@kpnqwest.fi
KPNQwest Finland Oy    @ the speed     tel +358 9 478 4800
Merimiehenkatu 36        of light      gsm +358 400 527 444
00150 HELSINKI                         fax +358 9 478 4808
FINLAND                                http://www.kpnqwest.fi/