flexfax: germany: SMS to D2 with UCP

[gorski@poboxes.com]

Hi all!

I've problems to send SMS to the german D2 telephone provider via UCP. I can
send SMS to other provider with the IXO protocol.
The log below shows that the message was send to the provider, but the message
was never received by a mobile.
So were could be the bug. Is it a problem of the provider or is my hylafax
misconfigured. How looks a successful log??
Any hints?? Thank you for your help and time.

- Achim





Jan 02 14:35:26.89: [ 9130]: SESSION BEGIN 00000021 491722278020
Jan 02 14:35:26.90: [ 9130]: SEND PAGE: JOB 31 DEST 01722278020 COMMID 00000021
Jan 02 14:35:26.90: [ 9130]: DELAY 2600 ms
Jan 02 14:35:29.51: [ 9130]: <-- [18:AT&FE0V1Q0XS0=0H0\r]
Jan 02 14:35:29.67: [ 9130]: --> [17:AT&FE0V1Q0XS0=0H0]
Jan 02 14:35:29.68: [ 9130]: --> [2:OK]
Jan 02 14:35:29.68: [ 9130]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
Jan 02 14:35:29.80: [ 9130]: --> [2:OK]
Jan 02 14:35:29.81: [ 9130]: <-- [5:ATM0\r]
Jan 02 14:35:29.92: [ 9130]: --> [2:OK]
Jan 02 14:35:29.93: [ 9130]: <-- [12:AT+FCLASS=0\r]
Jan 02 14:35:30.15: [ 9130]: --> [2:OK]
Jan 02 14:35:30.15: [ 9130]: <-- [6:AT%C0\r]
Jan 02 14:35:30.36: [ 9130]: --> [2:OK]
Jan 02 14:35:30.36: [ 9130]: DIAL 01722278020
Jan 02 14:35:30.36: [ 9130]: <-- [21:ATDT01722278020\r]
Jan 02 14:35:58.05: [ 9130]: --> [7:CONNECT]
Jan 02 14:35:58.05: [ 9130]: SEND message block: [01/00154/O/30/491731234567/491731234567////////48616C6F204D6172696F6E2120416C6C6573204775746520696E6575656E204A6168722E2047727573732C20416368696D/D1]
Jan 02 14:36:13.06: [ 9130]: SEND PAGE: FROM gorski@poboxes.com TO 01722278020 (sent in 0:43)
Jan 02 14:36:13.06: [ 9130]: <-- [5:ATH0\r]
Jan 02 14:36:18.06: [ 9130]: MODEM <Timeout>
Jan 02 14:36:18.07: [ 9130]: SESSION END