flexfax: No answer from remote

[George Zeigler <genz1968@mtu-net.ru>]

Hello,
	I typed
sendfax -n -d 232-9175 /usr/home/george/Office51/work/resume/NewResume.ps 
	I can hear the other fax answer, but there is no response from my
end.  Then in
tail -f /var/log/messages I see
"no answer from remote" .  What is
weird is that everything was working.  And I tried other fax numbers and same
thing.  I went through the thread, but didn't see anything that applied.  Maybe
a timeout to early, but I don't think that is it.  Please let me know if you see
anything pertanent in my /var/log messages .  I use /dev/ttyS1 by the way. 
Here is part of my inittab.

# fax getty (hylafax)
# mo:23:respawn:/usr/lib/fax/faxgetty /dev/modem
fx:2345:respawn:/usr/lib/fax/faxgetty /dev/ttyS1

Thanks
George
**************************
 Jan  7 15:53:17 george HylaFAX[1220]: <--- 220 george.hello server
(HylaFAX (tm) Version 4.0pl2) ready. Jan  7 15:53:17 george HylaFAX[1220]:
command: USER root  Jan  7 15:53:17 george HylaFAX[1220]: USER root
Jan  7 15:53:17 george HylaFAX[1220]: <--- 230 User root logged in.
Jan  7 15:53:17 george HylaFAX[1220]: command: TYPE I 
Jan  7 15:53:17 george HylaFAX[1220]: TYPE I
Jan  7 15:53:17 george HylaFAX[1220]: <--- 200 Type set to Image.
Jan  7 15:53:17 george HylaFAX[1220]: command: PORT 127,0,0,1,4,1 
Jan  7 15:53:17 george HylaFAX[1220]: PORT 127.0.0.1;260
Jan  7 15:53:17 george HylaFAX[1220]: <--- 200 PORT command successful.
Jan  7 15:53:17 george HylaFAX[1220]: command: MODE Z 
Jan  7 15:53:17 george HylaFAX[1220]: MODE Z
Jan  7 15:53:17 george HylaFAX[1220]: <--- 200 Mode set to ZIP.
Jan  7 15:53:17 george HylaFAX[1220]: command: STOT 
Jan  7 15:53:17 george HylaFAX[1220]: STOT
Jan  7 15:53:17 george HylaFAX[1220]: Filesystem has SysV-style file creation semantics.
Jan  7 15:53:17 george HylaFAX[1220]: <--- 150 FILE: /tmp/doc46.ps (Opening new data connection).
Jan  7 15:53:18 george HylaFAX[1220]: <--- 226 Transfer complete (FILE: /tmp/doc46.ps).
Jan  7 15:53:18 george HylaFAX[1220]: command: JNEW 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 200 New job created: jobid: 41 groupid: 41.
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM FROMUSER "root" 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 213 FROMUSER set to "root".
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM LASTTIME 000259 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 213 LASTTIME set to 000259.
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM MAXDIALS 12 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 213 MAXDIALS set to 12.
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM MAXTRIES 3 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 213 MAXTRIES set to 3.
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM SCHEDPRI 127 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 213 SCHEDPRI set to 127.
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM DIALSTRING "745-5156" 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 213 DIALSTRING set to "745-5156".
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM NOTIFYADDR "root@george.hello" 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 213 NOTIFYADDR set to "root@george.hello".
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM VRES 98 
Jan  7 15:53:18 george FaxQueuer[186]: SUBMIT JOB 41
Jan  7 15:53:19 george FaxQueuer[186]: JOB 41 (active dest +70957455156 pri 127 tts 0:00 killtime 2:58:59): PREPARE START
Jan  7 15:53:18 george HylaFAX[1220]: <--- 213 VRES set to 98.
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM PAGEWIDTH 209 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 213 PAGEWIDTH set to 209.
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM PAGELENGTH 296 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 213 PAGELENGTH set to 296.
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM NOTIFY "none" 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 213 NOTIFY set to "none".
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM PAGECHOP "default" 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 213 PAGECHOP set to "default".
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM CHOPTHRESHOLD 3 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 213 CHOPTHRESHOLD set to 3.
Jan  7 15:53:18 george HylaFAX[1220]: command: JPARM DOCUMENT /tmp/doc46.ps 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 200 Added document /tmp/doc46.ps as docq/doc46.ps.41.
Jan  7 15:53:18 george HylaFAX[1220]: command: JSUBM 
Jan  7 15:53:18 george HylaFAX[1220]: <--- 200 Job 41 submitted.
Jan  7 15:53:19 george FaxQueuer[1221]: JOB 41 (active dest +70957455156 pri 127 tts 0:00 killtime 2:58:59): CONVERT DOCUMENT: bin/ps2fax -o docq/doc46.ps;00 -r 98 -w 1728 -l 297 -m 30 -1 docq/doc46.ps.41
Jan  7 15:53:23 george FaxQueuer[186]: JOB 41 (active dest +70957455156 pri 127 tts 0:00 killtime 2:58:55): PREPARE DONE
Jan  7 15:53:23 george FaxQueuer[186]: JOB 41 (active dest +70957455156 pri 127 tts 0:00 killtime 2:58:55): CMD START /usr/lib/fax/faxsend -m ttyS1 sendq/q41 (PID 1225)
Jan  7 15:53:24 george FaxSend[1225]: MODEM set DTR OFF
Jan  7 15:53:24 george FaxSend[1225]: DELAY 2600 ms
Jan  7 15:53:26 george FaxSend[1225]: MODEM set DTR ON
Jan  7 15:53:26 george FaxSend[1225]: MODEM set baud rate: 19200 baud, input flow NONE, output flow NONE
Jan  7 15:53:26 george FaxSend[1225]: MODEM flush i/o
Jan  7 15:53:26 george FaxSend[1225]: <-- [15:ATE0V1Q0S0=0H0\r]
Jan  7 15:53:26 george FaxSend[1225]: --> [2:OK]
Jan  7 15:53:26 george FaxSend[1225]: <-- [12:ATS8=2S7=60\r]
Jan  7 15:53:27 george FaxSend[1225]: --> [2:OK]
Jan  7 15:53:27 george FaxSend[1225]: <-- [12:AT+FCLASS=?\r]
Jan  7 15:53:27 george FaxSend[1225]: --> [5:0,1,2]
Jan  7 15:53:27 george FaxSend[1225]: --> [2:OK]
Jan  7 15:53:27 george FaxSend[1225]: <-- [12:AT+FCLASS=1\r]
Jan  7 15:53:27 george FaxSend[1225]: --> [2:OK]
Jan  7 15:53:27 george FaxSend[1225]: <-- [9:AT+FTM=?\r]
Jan  7 15:53:27 george FaxSend[1225]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Jan  7 15:53:27 george FaxSend[1225]: --> [2:OK]
Jan  7 15:53:27 george FaxSend[1225]: <-- [9:AT+FRM=?\r]
Jan  7 15:53:27 george FaxSend[1225]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Jan  7 15:53:27 george FaxSend[1225]: --> [2:OK]
Jan  7 15:53:27 george FaxSend[1225]: <-- [12:AT+FCLASS=1\r]
Jan  7 15:53:27 george FaxSend[1225]: --> [2:OK]
Jan  7 15:53:27 george FaxSend[1225]: MODEM  /
Jan  7 15:53:27 george FaxSend[1225]: <-- [5:ATM0\r]
Jan  7 15:53:27 george FaxSend[1225]: --> [2:OK]
Jan  7 15:53:27 george FaxSend[1225]: MODEM input buffering disabled
Jan  7 15:53:28 george FaxGetty[185]: ANSWER: Can not lock modem device
Jan  7 15:53:28 george FaxSend[1225]: SEND FAX: JOB 41 DEST 745-5156 COMMID 00000069
Jan  7 15:53:55 george FaxSend[1225]: SEND FAILED: No answer from remote
Jan  7 15:53:55 george FaxQueuer[186]: JOB 41 (active dest +70957455156 pri 127 tts 0:00 killtime 2:58:23): CMD DONE: exit status 0
Jan  7 15:53:55 george FaxQueuer[186]: JOB 41 (sleeping dest +70957455156 pri 126 tts 0:00 killtime 2:58:23): SEND INCOMPLETE: requeue for 7:13; No answer from remote
Jan  7 15:53:58 george FaxGetty[185]: MODEM set DTR OFF
Jan  7 15:53:58 george FaxGetty[185]: DELAY 2600 ms
Jan  7 15:54:00 george FaxGetty[185]: MODEM set DTR ON
Jan  7 15:54:00 george FaxGetty[185]: MODEM set baud rate: 19200 baud, input flow NONE, output flow NONE
Jan  7 15:54:00 george FaxGetty[185]: MODEM flush i/o
Jan  7 15:54:00 george FaxGetty[185]: <-- [15:ATE0V1Q0S0=0H0\r]
Jan  7 15:54:00 george FaxGetty[185]: --> [2:OK]
Jan  7 15:54:00 george FaxGetty[185]: <-- [12:ATS8=2S7=60\r]
Jan  7 15:54:00 george FaxGetty[185]: --> [2:OK]
Jan  7 15:54:00 george FaxGetty[185]: <-- [12:AT+FCLASS=?\r]
Jan  7 15:54:00 george FaxGetty[185]: --> [5:0,1,2]
Jan  7 15:54:00 george FaxGetty[185]: --> [2:OK]
Jan  7 15:54:00 george FaxGetty[185]: <-- [12:AT+FCLASS=1\r]
Jan  7 15:54:00 george FaxGetty[185]: --> [2:OK]
Jan  7 15:54:00 george FaxGetty[185]: <-- [9:AT+FTM=?\r]
Jan  7 15:54:00 george FaxGetty[185]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Jan  7 15:54:00 george FaxGetty[185]: --> [2:OK]
Jan  7 15:54:00 george FaxGetty[185]: <-- [9:AT+FRM=?\r]
Jan  7 15:54:00 george FaxGetty[185]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Jan  7 15:54:00 george FaxGetty[185]: --> [2:OK]
Jan  7 15:54:00 george FaxGetty[185]: <-- [12:AT+FCLASS=1\r]
Jan  7 15:54:00 george FaxGetty[185]: --> [2:OK]
Jan  7 15:54:00 george FaxGetty[185]: MODEM  /
Jan  7 15:54:00 george FaxGetty[185]: <-- [5:ATM0\r]
Jan  7 15:54:00 george FaxGetty[185]: --> [2:OK]
Jan  7 15:54:00 george FaxGetty[185]: MODEM input buffering disabled

--
My personal website
http://www.firstnethou.com/gz/welcome.htm