flexfax: Problem with two or more pages

[Stefano <stefano@cd.univr.it>]

I have problem sending fax with two or more pages because
Hylafax report error 54 "No response to MPS or EOP".

I have see that in case of 2 pages log files report an "MODEM <Empty line>"?


With 1 page (CORRECT)

Nov 24 15:52:56.67: [21923]: SEND end page
Nov 24 15:52:59.92: [21923]: --> [2:OK]
Nov 24 15:52:59.92: [21923]: DELAY 95 ms
Nov 24 15:53:00.02: [21923]: SEND send EOP (no more pages or documents)
Nov 24 15:53:00.02: [21923]: <-- [9:AT+FTH=3\r]
Nov 24 15:53:00.07: [21923]: --> [7:CONNECT]
Nov 24 15:53:00.07: [21923]: <-- data [3]
Nov 24 15:53:00.07: [21923]: <-- data [2]
Nov 24 15:53:01.39: [21923]: --> [2:OK]
Nov 24 15:53:01.39: [21923]: <-- [9:AT+FRH=3\r]
Nov 24 15:53:02.14: [21923]: --> [7:CONNECT]
Nov 24 15:53:03.14: [21923]: --> [2:OK]
Nov 24 15:53:03.14: [21923]: SEND recv MCF (message confirmation)


With 2 page (BAD)

Nov 24 14:13:09.92: [20441]: SEND end page
Nov 24 14:13:21.11: [20441]: --> [2:OK]
Nov 24 14:13:21.11: [20441]: DELAY 95 ms
Nov 24 14:13:21.21: [20441]: SEND send EOP (no more pages or documents)
Nov 24 14:13:21.21: [20441]: <-- [9:AT+FTH=3\r]
Nov 24 14:13:21.26: [20441]: --> [7:CONNECT]
Nov 24 14:13:21.26: [20441]: <-- data [3]
Nov 24 14:13:21.26: [20441]: <-- data [2]
Nov 24 14:13:22.57: [20441]: --> [2:OK]
Nov 24 14:13:22.57: [20441]: <-- [9:AT+FRH=3\r]
Nov 24 14:13:25.67: [20441]: --> [0:]
Nov 24 14:13:25.67: [20441]: MODEM <Empty line>
Nov 24 14:13:25.67: [20441]: <-- data [1]
Nov 24 14:13:25.73: [20441]: --> [2:OK]
Nov 24 14:13:25.73: [20441]: SEND send EOP (no more pages or documents)