HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Problem sending to an Okifax 5800



I am having a problem sending faxes to an Okidata 5800 fax machine from 
my Hylafax v4.0pl2 running on SCO Openserver 5 with a Practical Peripherals
14400FXMT modem.

This is really odd.  If I send a fax with a TagFormat defined in my
config file Hylafax thinks the fax sends fine but all the fax machine gets
is the tag line.  If I take out the TagFormat line the fax goes through
fine.  I am also having sporadic problems with some fax machines where
they will get only the cover page and hylafax will error out.

If anyone has any ideas I will be very grateful for any input.

Here is a listing of my config file.

CountryCode:            1                                 
AreaCode:               920                               
FAXNumber:              433-5440                          
LongDistancePrefix:     1                                 
InternationalPrefix:    011                               
DialStringRules:        "etc/dialrules"                   
ServerTracing:          1                                 
SessionTracing:         11                                
RecvFileMode:           0600                              
LogFileMode:            0600                              
DeviceMode:             0600                              
RingsBeforeAnswer:      1                                 
SpeakerVolume:          off                               
GettyArgs:              "-h %l dx_%s"                     
LocalIdentifier:        "Green Bay Packaging - A15"       
TagLineFont:            etc/lutRS18.pcf                   
TagLineFormat:          "From %%l|%c|Page %%p of %%t"     
MaxRecvPages:           25                                
#                                                         
#                                                         
# Modem-related stuff: should reflect modem command interface
    
# and hardware connection/cabling (e.g. flow control).
    
#
    
ModemType:              Class1          # use class 1 interface
    
ModemRate:              38400
    
ModemFlowControl:       rtscts          # default
    
#
    
ModemNoFlowCmd:         AT&K0           # disable flow control cmd
    
ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
    
ModemSoftFlowCmd:       AT&K4           # software flow control cmd
    
ModemSetupDTRCmd:       AT&D3           # setup so DTR drop resets modem
    
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or
not)
ModemSetupAACmd:        AT+FAA=0        # in case modem supports Class 2
also   
#
    
ModemMfrQueryCmd:       !Rockwell       # no way to query modem
    
ModemModelQueryCmd:     !RC32ACL        # not always right
    
ModemRevQueryCmd:       ATI3
    

    
ModemSendFillOrder:     LSB2MSB
    
ModemRecvFillOrder:     MSB2LSB
    


Tom Tilque
Senior Programmer/Analyst
Green Bay Packaging Inc.
1700 N. Webster Ct
Green Bay, WI  54302-1196

ttilque@gbp.com




Project hosted by iFAX Solutions