HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: No response to MPS or EOP



Hi,

 > ....
 > Oct 29 08:57:01.32: [  353]: SEND begin page
 >     data
 > Oct 29 08:57:17.37: [  353]: SENT 6171 bytes of data
 > Oct 29 08:57:17.37: [  353]: SEND 1D RTC
 > Oct 29 08:57:17.37: [  353]: <-- data [29]
 > Oct 29 08:57:17.38: [  353]: <-- data [2]
 > Oct 29 08:57:17.38: [  353]: SEND end page
 > Oct 29 08:57:29.19: [  353]: --> [2:^S^Q]
 > ....

I am pretty sure the above should *not* be there, it looks like the modem 
is wanting to do xon/xoff flow control the ^S and ^Q characters whereas the 
OS/Hylafax wants either no flow control or hardware.  There are also long 
delays there.  Look at the output of stty to see what the OS thinks flow 
control should be, look at the modem config file for what hylafax thinks 
make sure they are consistent.

Also perhaps just try using the modem to do some kind of data connection 
like cu or kermit or even ppp, as this is often easier to diagnose problems 
with hardware and operating system setup.

- Robert




Project hosted by iFAX Solutions