 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: Revised Class 2 config file for MT5600ZDX based upon work of Mark J. Bailey
- To: Jonathan.Mau@nrc.ca
- Subject: Re: flexfax: Revised Class 2 config file for MT5600ZDX based upon work of Mark J. Bailey
- From: Glenn Burkhardt <glenn@aoi.ultranet.com>
- Cc: flexfax@sgi.com
- Date: Fri, 29 Oct 1999 08:29:41 -0400
> Glenn: > > Thanks for the feedback. One question though, you don't seem to be using > flow control - am I missing something? The default for ModemFlowControl is > "none". > > Jonathan > > > #ModemFlowControl: xonxoff # XON/XOFF flow control assumed > > Oops! Sorry, the line should be ModemFlowControl: rtscts
- Prev by Date: exim and hylafax
- Next by Date: Unknown problem (check modem)
- Prev by thread: Re: Revised Class 2 config file for MT5600ZDX based upon work of Mark J. Bailey
- Next by thread: Error Message ststus: nothing available
- Index(es):
Project hosted by iFAX Solutions