HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Will 4.1b3 or 4.1 solve "no response to MPS"?



> >You don't know when to start sending unless you get that response!
> I meant that when hylafax starts asking for an MPS response it should go
> straight on instead. So the "when" is when hylafax is waiting for the
> MPS.

That will break with all properly operating fax machines, as they
will be expecting a low speed (V.21) MPS and you will be sending 
high speed (V.29 etc.) fax image data.  (V.21 is 300 bps, V.29 is
9600 bps.)




Project hosted by iFAX Solutions