 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
No response to MPS or EOP repeated 3 tries
- To: flexfax@sgi.com
- Subject: flexfax: No response to MPS or EOP repeated 3 tries
- From: christine.a.palma@bellatlantic.com
- Date: Wed, 20 Oct 1999 15:53:49 -0400
Hi!
I would greatly appreciate any help in regards to the following problem.....
Everytime I try to sendfax (sendfax -d 1-215-563-9507 testfax.dat) I receive the
error message:
Your facsimile job to 1-215-563-9507 failed because:
No response to MPS or EOP repeated 3 tries; Giving up after 3 attempts to
send same page
On the first attempt, one page comes out of the fax machine with just the Date,
Time, FaxNumber and page number on it.
When it tries the other two times, a little more junk comes out on the page
(part of the cover page).
I am running Hylafax v4.0 pL2 on a Sparc 2000E/Solaris 2.5.1.
The modem is a USR Sportster 14,400 Data/Fax External Version (Product code
00026801).
The modem ATI7 Configuration Profile...
Product type US/Canada External
Options V32
Fax Options Class 1
Clock Freq 16.0Mhz
Eprom 128k
Ram 32k
Supervisor date 10/15/93
DSP date 06/01/93
Supervisor rev 4.1
DSP rev 10
The USRobotics Sportster 14400 Fax Settings...
B0 E1 F1 M1 Q0 V1 X4 Y0
BAUD=19200 PARITY=N WORDLEN=8
DIAL=HUNT ON HOOK
&A3 &B1 &C0 &D2 &G0 &H2 &I0 &K1
&M4 &N0 &P0 &R2 &S0 &T5 &Y1
S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002
S07=060 S08=002 S09=006 S10=007 S11=070 S12=050 S13=000
S14=000 S15=128 S16=000 S17=000 S18=000 S19=000 S20=000
S21=010 S22=017 S23=019 S24=000 S25=005 S26=000 S27=000
S28=008 S29=020 S30=000 S31=000 S32=000 S33=000 S34=006
S35=000 S36=014 S37=000 S38=000 S39=000 S40=000 S41=000
S42=000 S43=000 S44=015 S45=000 S46=000 S47=000 S48=000
S49=000 S50=000 S51=000
The log output is as follows:
---- Transcript of session follows ----
Oct 20 15:25:05.93: [ 8519]: SESSION BEGIN 00000014 12155639507
Oct 20 15:25:05.93: [ 8519]: SEND FAX: JOB 15 DEST 1-215-563-9507 COMMID
00000014
Oct 20 15:25:05.93: [ 8519]: DELAY 2600 ms
Oct 20 15:25:08.53: [ 8519]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Oct 20 15:25:08.76: [ 8519]: --> [2:OK]
Oct 20 15:25:08.76: [ 8519]: <-- [32:ATS8=2S7=60&H2&I2&R1S13=1&D2&C1\r]
Oct 20 15:25:08.94: [ 8519]: --> [2:OK]
Oct 20 15:25:08.94: [ 8519]: <-- [12:AT+FCLASS=1\r]
Oct 20 15:25:08.99: [ 8519]: --> [2:OK]
Oct 20 15:25:08.99: [ 8519]: <-- [12:AT+FCLASS=0\r]
Oct 20 15:25:09.05: [ 8519]: --> [2:OK]
Oct 20 15:25:09.05: [ 8519]: <-- [5:ATM0\r]
Oct 20 15:25:09.22: [ 8519]: --> [2:OK]
Oct 20 15:25:09.25: [ 8519]: <-- [12:AT+FCLASS=1\r]
Oct 20 15:25:09.29: [ 8519]: --> [2:OK]
Oct 20 15:25:09.30: [ 8519]: DIAL 12155639507
Oct 20 15:25:09.30: [ 8519]: <-- [16:ATDT12155639507\r]
Oct 20 15:25:26.93: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:28.87: [ 8519]: --> [2:OK]
Oct 20 15:25:28.87: [ 8519]: <-- [9:AT+FRH=3\r]
Oct 20 15:25:28.91: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:29.60: [ 8519]: --> [2:OK]
Oct 20 15:25:29.60: [ 8519]: REMOTE CSI "215 563 9507"
Oct 20 15:25:29.61: [ 8519]: <-- [9:AT+FRH=3\r]
Oct 20 15:25:29.65: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:29.98: [ 8519]: --> [2:OK]
Oct 20 15:25:29.99: [ 8519]: REMOTE best rate 14400 bit/s
Oct 20 15:25:29.99: [ 8519]: REMOTE max page width 1728 pixels in 215 mm
Oct 20 15:25:29.99: [ 8519]: REMOTE max unlimited page length
Oct 20 15:25:29.99: [ 8519]: REMOTE best vres 7.7 line/mm
Oct 20 15:25:29.99: [ 8519]: REMOTE best format 2-D MMR
Oct 20 15:25:29.99: [ 8519]: REMOTE supports T.30 Annex A, ECM
Oct 20 15:25:29.99: [ 8519]: REMOTE best 0 ms/scanline
Oct 20 15:25:29.99: [ 8519]: USE 14400 bit/s
Oct 20 15:25:29.99: [ 8519]: USE 0 ms/scanline
Oct 20 15:25:29.99: [ 8519]: SEND file "docq/doc15.cover;30"
Oct 20 15:25:30.00: [ 8519]: USE page width 1728 pixels in 215 mm
Oct 20 15:25:30.00: [ 8519]: USE unlimited page length
Oct 20 15:25:30.00: [ 8519]: USE 3.85 line/mm
Oct 20 15:25:30.00: [ 8519]: USE 1-D MR
Oct 20 15:25:30.00: [ 8519]: SEND training at v.17 14400 bit/s
Oct 20 15:25:30.01: [ 8519]: <-- [9:AT+FTH=3\r]
Oct 20 15:25:30.09: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:31.83: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:32.53: [ 8519]: --> [2:OK]
Oct 20 15:25:32.53: [ 8519]: DELAY 75 ms
Oct 20 15:25:32.61: [ 8519]: <-- [11:AT+FTM=145\r]
Oct 20 15:25:34.28: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:35.13: [ 8519]: --> [2:]
Oct 20 15:25:35.13: [ 8519]: --> [2:OK]
Oct 20 15:25:35.14: [ 8519]: <-- [9:AT+FRH=3\r]
Oct 20 15:25:36.11: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:37.25: [ 8519]: --> [2:OK]
Oct 20 15:25:37.25: [ 8519]: DELAY 1500 ms
Oct 20 15:25:38.75: [ 8519]: SEND training at v.17 14400 bit/s
Oct 20 15:25:38.75: [ 8519]: <-- [9:AT+FTH=3\r]
Oct 20 15:25:38.84: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:40.58: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:41.28: [ 8519]: --> [2:OK]
Oct 20 15:25:41.28: [ 8519]: DELAY 75 ms
Oct 20 15:25:41.36: [ 8519]: <-- [11:AT+FTM=145\r]
Oct 20 15:25:43.03: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:43.88: [ 8519]: --> [2:OK]
Oct 20 15:25:43.89: [ 8519]: <-- [9:AT+FRH=3\r]
Oct 20 15:25:44.86: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:46.00: [ 8519]: --> [2:OK]
Oct 20 15:25:46.00: [ 8519]: DELAY 1500 ms
Oct 20 15:25:47.50: [ 8519]: SEND training at v.17 12000 bit/s
Oct 20 15:25:47.50: [ 8519]: <-- [9:AT+FTH=3\r]
Oct 20 15:25:47.59: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:49.33: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:50.03: [ 8519]: --> [2:OK]
Oct 20 15:25:50.03: [ 8519]: DELAY 75 ms
Oct 20 15:25:50.11: [ 8519]: <-- [11:AT+FTM=121\r]
Oct 20 15:25:51.78: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:53.50: [ 8519]: --> [1:]
Oct 20 15:25:53.50: [ 8519]: --> [2:OK]
Oct 20 15:25:53.51: [ 8519]: <-- [9:AT+FRH=3\r]
Oct 20 15:25:53.93: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:55.07: [ 8519]: --> [2:OK]
Oct 20 15:25:55.07: [ 8519]: TRAINING succeeded
Oct 20 15:25:55.08: [ 8519]: <-- [11:AT+FTM=122\r]
Oct 20 15:25:55.27: [ 8519]: --> [7:CONNECT]
Oct 20 15:25:55.27: [ 8519]: SEND begin page
Oct 20 15:25:57.99: [ 8519]: SENT 13099 bytes of data
Oct 20 15:25:57.99: [ 8519]: SEND 1D RTC
Oct 20 15:25:58.00: [ 8519]: SEND end page
Oct 20 15:25:58.00: [ 8519]: --> [2:]
Oct 20 15:25:58.00: [ 8519]: --> [2:OK]
Oct 20 15:25:58.75: [ 8519]: DELAY 75 ms
Oct 20 15:25:58.83: [ 8519]: SEND send MPS (more pages, same document)
Oct 20 15:25:58.83: [ 8519]: <-- [9:AT+FTH=3\r]
Oct 20 15:25:58.94: [ 8519]: --> [7:CONNECT]
Oct 20 15:26:00.14: [ 8519]: --> [2:OK]
Oct 20 15:26:00.14: [ 8519]: <-- [9:AT+FRH=3\r]
Oct 20 15:26:03.25: [ 8519]: --> [0:]
Oct 20 15:26:03.25: [ 8519]: MODEM <Empty line>
Oct 20 15:26:03.26: [ 8519]: --> [2:OK]
Oct 20 15:26:03.26: [ 8519]: SEND send MPS (more pages, same document)
Oct 20 15:26:03.27: [ 8519]: <-- [9:AT+FTH=3\r]
Oct 20 15:26:03.35: [ 8519]: --> [7:CONNECT]
Oct 20 15:26:04.56: [ 8519]: --> [2:OK]
Oct 20 15:26:04.56: [ 8519]: <-- [9:AT+FRH=3\r]
Oct 20 15:26:07.67: [ 8519]: --> [0:]
Oct 20 15:26:07.67: [ 8519]: MODEM <Empty line>
Oct 20 15:26:07.68: [ 8519]: --> [2:OK]
Oct 20 15:26:07.69: [ 8519]: SEND send MPS (more pages, same document)
Oct 20 15:26:07.69: [ 8519]: <-- [9:AT+FTH=3\r]
Oct 20 15:26:07.77: [ 8519]: --> [7:CONNECT]
Oct 20 15:26:08.98: [ 8519]: --> [2:OK]
Oct 20 15:26:08.99: [ 8519]: <-- [9:AT+FRH=3\r]
Oct 20 15:26:09.54: [ 8519]: --> [7:CONNECT]
Oct 20 15:26:12.30: [ 8519]: MODEM <Timeout>
Oct 20 15:26:12.31: [ 8519]: SEND: No response to MPS or EOP repeated 3 tries;
Giving up after 3 attempts to send same page "docq/doc15.cover;30", dirnum 0
Oct 20 15:26:12.31: [ 8519]: <-- [9:AT+FTH=3\r]
Oct 20 15:26:12.40: [ 8519]: --> [7:CONNECT]
Oct 20 15:26:13.61: [ 8519]: --> [2:OK]
Oct 20 15:26:13.62: [ 8519]: <-- [5:ATH0\r]
Oct 20 15:26:13.85: [ 8519]: --> [2:OK]
Oct 20 15:26:13.86: [ 8519]: SESSION END
Thanks!
Christine
- Prev by Date: WHFC client..
- Next by Date: Re: WHFC client..
- Prev by thread: Multitech MT3334ZDX Trashing Incoming Faxes?
- Next by thread: Error Message status: nothing available
- Index(es):
Project hosted by iFAX Solutions