flexfax: COMREC invalid response received

[Michael Bastian <bastian@remis.de>]

Hello.


Since we had serve Problems with our Macintosh Fax Server(crashes ans squished
faxes) we decided to try Hylafax 4.0 from SuSE 6.1. The problem is that faxes
from some customers are now rejected and we cant find a clue why this
happens. Were using 2 Acer Modem 56Surf configured to Class1 on an Pentium
PC with an 2.2.5 Kernel.

Below is a typical snap from the logs.
Note: This happens also with 2-D MR

regards

Michael Bastian


--------------------

                        Oct 18 19:43:26.91: [  154]: REMOTE TSI ""
Oct 18 19:43:26.91: [  154]: <-- [9:AT+FRH=3\r]
Oct 18 19:43:26.94: [  154]: --> [7:CONNECT]
Oct 18 19:43:27.18: [  154]: --> [2:OK]
Oct 18 19:43:27.18: [  154]: REMOTE wants 9600 bit/s
Oct 18 19:43:27.18: [  154]: REMOTE wants page width 1728 pixels in 215 mm
Oct 18 19:43:27.18: [  154]: REMOTE wants unlimited page length
Oct 18 19:43:27.18: [  154]: REMOTE wants 7.7 line/mm
Oct 18 19:43:27.18: [  154]: REMOTE wants 1-D MR
Oct 18 19:43:27.18: [  154]: RECV training at v.29 9600 bit/s
Oct 18 19:43:27.18: [  154]: <-- [10:AT+FRM=96\r]
Oct 18 19:43:27.63: [  154]: --> [7:CONNECT]
Oct 18 19:43:29.19: [  154]: RECV: TCF 1860 bytes, 1% non-zero, 1800 zero-run
Oct 18 19:43:29.21: [  154]: --> [10:NO CARRIER]
Oct 18 19:43:29.21: [  154]: DELAY 75 ms
Oct 18 19:43:29.29: [  154]: <-- [9:AT+FTH=3\r]
Oct 18 19:43:29.31: [  154]: --> [7:CONNECT]
Oct 18 19:43:29.31: [  154]: <-- data [3]
Oct 18 19:43:29.31: [  154]: <-- data [2]
Oct 18 19:43:30.56: [  154]: --> [2:OK]
Oct 18 19:43:30.56: [  154]: TRAINING succeeded
Oct 18 19:43:30.56: [  154]: <-- [10:AT+FRM=96\r]
Oct 18 19:43:30.88: [  154]: --> [8:+FCERROR]
Oct 18 19:43:30.88: [  154]: <-- [9:AT+FRH=3\r]
Oct 18 19:43:36.48: [  154]: --> [8:+FCERROR]
Oct 18 19:43:36.48: [  154]: <-- [10:AT+FRM=96\r]
Oct 18 19:43:36.90: [  154]: --> [8:+FCERROR]
Oct 18 19:43:36.90: [  154]: <-- [9:AT+FRH=3\r]
Oct 18 19:43:41.95: [  154]: --> [8:+FCERROR]
Oct 18 19:43:41.95: [  154]: <-- [10:AT+FRM=96\r]
Oct 18 19:43:42.36: [  154]: --> [8:+FCERROR]
Oct 18 19:43:42.36: [  154]: <-- [9:AT+FRH=3\r]
Oct 18 19:43:47.41: [  154]: --> [8:+FCERROR]   
... and so on ...
Oct 18 19:44:31.09: [  154]: <-- [10:AT+FRM=96\r]
Oct 18 19:44:31.50: [  154]: --> [8:+FCERROR]
Oct 18 19:44:31.50: [  154]: <-- [9:AT+FRH=3\r]
Oct 18 19:44:36.00: [  154]: --> [7:CONNECT]
Oct 18 19:44:37.12: [  154]: --> [2:OK]
Oct 18 19:44:37.12: [  154]: RECV recv EOP (no more pages or documents)
Oct 18 19:44:37.12: [  154]: RECV FAX (00000132): recvq/fax00129.tif from , route to <unspecified>, 0 pages in 1:15
Oct 18 19:44:37.12: [  154]: RECV FAX: COMREC invalid response received
Oct 18 19:44:37.12: [  154]: <-- [9:AT+FTH=3\r]
Oct 18 19:44:37.32: [  154]: --> [7:CONNECT]
Oct 18 19:44:37.32: [  154]: <-- data [3]
Oct 18 19:44:37.32: [  154]: <-- data [2]
Oct 18 19:44:38.56: [  154]: --> [2:OK]
Oct 18 19:44:38.56: [  154]: RECV FAX (00000132): session with  terminated abnormally: COMREC invalid response received
Oct 18 19:44:38.56: [  154]: RECV FAX: bin/faxrcvd "recvq/fax00129.tif" "ttyS0" "00000132" "COMREC invalid response received"
Oct 18 19:44:38.75: [  154]: RECV FAX: end
Oct 18 19:44:38.76: [  154]: SESSION END