flexfax: COMREC ERROR

[Joaqu�n Arza Laurenz <jarza@unav.es>]

Hello.


This is the second time i send a message about this problem.
My system is Hylafax 4.1beta1 on Red Hat 5.2, with two Multitech
2834ZDXI modems.
I've installed the version but it hasn't fixed the error.
The message i got whe receiving some faxes is:

An attempt to receive facsimile on ttyS1 failed because:

    COMREC error


This doesn't happen everytime with a modem. In fact, i have sent faxes
from a test fax, and some of them are reveived without problems and the
others generate this error. Simply adding a line to the fax i send, may
result in problems for receiving the fax or also that a fax that's
having problems is received without problems. Have anyone idea what is
happening with my fax server.


    ---- Transcript of session follows ----

Oct 05 12:09:20.96: [ 5008]: SESSION BEGIN 00000062 34948296500
Oct 05 12:09:20.97: [ 5008]: <-- [4:ATA\r]
Oct 05 12:09:46.02: [ 5008]: --> [5:+FCON]
Oct 05 12:09:46.02: [ 5008]: ANSWER: FAX CONNECTION
Oct 05 12:09:46.02: [ 5008]: RECV FAX: begin
Oct 05 12:09:51.11: [ 5008]: --> [28:+FTSI:"+Clinica Universitar"]
Oct 05 12:09:51.11: [ 5008]: REMOTE TSI "+Clinica Universitar"
Oct 05 12:09:51.11: [ 5008]: --> [21:+FDCS:1,5,0,2,1,0,0,0]
Oct 05 12:09:51.11: [ 5008]: REMOTE wants 14400 bit/s
Oct 05 12:09:51.11: [ 5008]: REMOTE wants page width 1728 pixels in 215
mm
Oct 05 12:09:51.11: [ 5008]: REMOTE wants unlimited page length
Oct 05 12:09:51.11: [ 5008]: REMOTE wants 7.7 line/mm
Oct 05 12:09:51.11: [ 5008]: REMOTE wants 2-D MR
Oct 05 12:09:51.11: [ 5008]: --> [2:OK]
Oct 05 12:09:51.12: [ 5008]: <-- [7:AT+FDR\r]
Oct 05 12:09:52.50: [ 5008]: --> [5:+FCFR]
Oct 05 12:09:52.50: [ 5008]: --> [28:+FTSI:"+Clinica Universitar"]
Oct 05 12:09:52.50: [ 5008]: REMOTE TSI "+Clinica Universitar"
Oct 05 12:09:52.50: [ 5008]: --> [21:+FDCS:1,5,0,2,1,0,0,0]
Oct 05 12:09:52.50: [ 5008]: REMOTE wants 14400 bit/s
Oct 05 12:09:52.50: [ 5008]: REMOTE wants page width 1728 pixels in 215
mm
Oct 05 12:09:52.50: [ 5008]: REMOTE wants unlimited page length
Oct 05 12:09:52.50: [ 5008]: REMOTE wants 7.7 line/mm
Oct 05 12:09:52.51: [ 5008]: REMOTE wants 2-D MR
Oct 05 12:09:53.73: [ 5008]: --> [7:CONNECT]
Oct 05 12:09:53.73: [ 5008]: RECV: begin page
Oct 05 12:09:53.73: [ 5008]: RECV: send trigger 022
Oct 05 12:10:01.76: [ 5008]: RECV: 12703 bytes of data, 908 total lines
Oct 05 12:10:01.76: [ 5008]: --> [15:+FPTS:2,0,0,0,0]
Oct 05 12:10:03.04: [ 5008]: --> [6:+FET:2]
Oct 05 12:10:03.04: [ 5008]: RECV recv EOP (no more pages or documents)
Oct 05 12:10:03.04: [ 5008]: --> [2:OK]
Oct 05 12:10:03.04: [ 5008]: RECV send RTN (retrain negative)
Oct 05 12:10:03.04: [ 5008]: <-- [7:AT+FDR\r]
Oct 05 12:10:11.22: [ 5008]: --> [5:+FCFR]
Oct 05 12:10:11.22: [ 5008]: --> [28:+FTSI:"+Clinica Universitar"]
Oct 05 12:10:11.22: [ 5008]: REMOTE TSI "+Clinica Universitar"
Oct 05 12:10:11.22: [ 5008]: --> [21:+FDCS:1,4,0,2,1,0,0,0]
Oct 05 12:10:11.22: [ 5008]: REMOTE wants 12000 bit/s
Oct 05 12:10:11.22: [ 5008]: REMOTE wants page width 1728 pixels in 215
mm
Oct 05 12:10:11.22: [ 5008]: REMOTE wants unlimited page length
Oct 05 12:10:11.22: [ 5008]: REMOTE wants 7.7 line/mm
Oct 05 12:10:11.23: [ 5008]: REMOTE wants 2-D MR
Oct 05 12:10:12.42: [ 5008]: --> [7:CONNECT]
Oct 05 12:10:12.42: [ 5008]: RECV: begin page
Oct 05 12:10:12.42: [ 5008]: RECV: send trigger 022
Oct 05 12:10:21.87: [ 5008]: RECV: 12707 bytes of data, 910 total lines
Oct 05 12:10:21.87: [ 5008]: --> [15:+FPTS:2,0,0,0,0]
Oct 05 12:10:23.12: [ 5008]: --> [6:+FET:2]
Oct 05 12:10:23.12: [ 5008]: RECV recv EOP (no more pages or documents)
Oct 05 12:10:23.12: [ 5008]: --> [2:OK]
Oct 05 12:10:23.12: [ 5008]: RECV send RTN (retrain negative)
Oct 05 12:10:23.12: [ 5008]: <-- [7:AT+FDR\r]
Oct 05 12:10:31.33: [ 5008]: --> [5:+FCFR]
Oct 05 12:10:31.33: [ 5008]: --> [28:+FTSI:"+Clinica Universitar"]
Oct 05 12:10:31.33: [ 5008]: REMOTE TSI "+Clinica Universitar"
Oct 05 12:10:31.33: [ 5008]: --> [21:+FDCS:1,3,0,2,1,0,0,0]
Oct 05 12:10:31.33: [ 5008]: REMOTE wants 9600 bit/s
Oct 05 12:10:31.33: [ 5008]: REMOTE wants page width 1728 pixels in 215
mm
Oct 05 12:10:31.33: [ 5008]: REMOTE wants unlimited page length
Oct 05 12:10:31.33: [ 5008]: REMOTE wants 7.7 line/mm
Oct 05 12:10:31.34: [ 5008]: REMOTE wants 2-D MR
Oct 05 12:10:32.53: [ 5008]: --> [7:CONNECT]
Oct 05 12:10:32.53: [ 5008]: RECV: begin page
Oct 05 12:10:32.53: [ 5008]: RECV: send trigger 022
Oct 05 12:10:44.09: [ 5008]: RECV: 12710 bytes of data, 912 total lines
Oct 05 12:10:44.09: [ 5008]: --> [15:+FPTS:2,0,0,0,0]
Oct 05 12:10:45.35: [ 5008]: --> [6:+FET:2]
Oct 05 12:10:45.35: [ 5008]: RECV recv EOP (no more pages or documents)
Oct 05 12:10:45.35: [ 5008]: --> [2:OK]
Oct 05 12:10:45.35: [ 5008]: RECV send RTN (retrain negative)
Oct 05 12:10:45.35: [ 5008]: <-- [7:AT+FDR\r]
Oct 05 12:10:48.14: [ 5008]: --> [8:+FHNG:72]
Oct 05 12:10:48.14: [ 5008]: REMOTE HANGUP: COMREC error (code 72)
Oct 05 12:10:48.14: [ 5008]: RECV FAX (00000062): recvq/fax00018.tif
from +Clinica Universitar, route to <unspecified>, 0 pages in 1
:02
Oct 05 12:10:48.15: [ 5008]: RECV FAX: COMREC error
Oct 05 12:10:48.15: [ 5008]: RECV FAX (00000062): session with +Clinica
Universitar terminated abnormally: COMREC error
Oct 05 12:10:48.15: [ 5008]: RECV FAX: bin/faxrcvd "recvq/fax00018.tif"
"ttyS1" "00000062" "COMREC error"

Thanks for your help.
Joaquin Arza.