Re: flexfax: No response to EOP

["Brandon W. Beasley" <bwb@philmer.com>]

What about disabling error correction?  Have you done that yet?



Federico Sevilla III wrote:

> Hi there everyone!
>
> I recently set up HylaFAX 4.1beta1 on RedHat 6.0 using the RPMs. After all
> the reading, and finally getting my modem (A USRobotics Sportster v.90) to
> handshake properly with a Panasonic KX-F700 fax machine, I have one last
> problem left. HylaFAX keeps on resending the fax (test fax, a single one).
> The output is okay naman, but I guess for the computer it's not enough.
>
> I checked the logs and found the following pertinent information:
>
> Sep 28 16:36:58.35: [ 7625]: <-- data [9]
> Sep 28 16:36:58.35: [ 7625]: SEND end page
> Sep 28 16:36:58.35: [ 7625]: SEND send EOP (no more pages or documents)
> Sep 28 16:36:58.35: [ 7625]: <-- data [2]
> Sep 28 16:37:22.03: [ 7625]: --> [7:+FHS:54]
> Sep 28 16:37:22.03: [ 7625]: REMOTE HANGUP: No response to EOP repeated 3
> times (code 54)
>
> Hmmmmm ...
>
> I've got my maximum bad lines, and minimum percent good set to the
> defaults implicitly (5 and 95 respectively). I'm using most of the configs
> from the usr-2.0 example file in config/. This is a Class 2.0 modem and
> it's got AT+FCLASS=2.0 set as its Class2Cmd.
>
> Would there be any way to fix this? Any ideas? Muchos gracias and please
> pardon the potential lameness. :-)
>
>    [        Jijo Sevilla         ]
>    [ jijo@leather-collection.com ]
>    [ eFax # :  +1 (707) 988-0887 ]

--
Brandon W. Beasley         bbeasley@philmer.com
Phillips & Merica, P.C.    http://www.philmer.com
1303 San Antonio Street    (512) 477-1216
Austin, Texas 78701        (512) 478-0523 fax