Re: flexfax: SEND FAILED: Remote is not T.4 compatible ????????

[Christian Schlange <Christian.Schlange@tu-clausthal.de>]

Hi,

I still got that problem with flexflax (I receive the above error 
message on some fax-machines). Here is a logfile show the complete
connection process. Maybe this helps ? 


Aug 26 15:13:13.73: [  862]: SESSION BEGIN 00000007 141500190512776
Aug 26 15:13:13.73: [  862]: SEND FAX: JOB 14 DEST 00190512776 COMMID 00000007
Aug 26 15:13:13.73: [  862]: DELAY 2600 ms
Aug 26 15:13:16.34: [  862]: <-- [17:ATX0E0V1Q0S0=0H0\r]
Aug 26 15:13:16.36: [  862]: --> [2:OK]
Aug 26 15:13:16.36: [  862]: <-- [12:ATS8=2S7=60\r]
Aug 26 15:13:16.38: [  862]: --> [2:OK]
Aug 26 15:13:16.38: [  862]: <-- [12:AT+FCLASS=1\r]
Aug 26 15:13:16.40: [  862]: --> [2:OK]
Aug 26 15:13:16.40: [  862]: <-- [7:ATL3M1\r]
Aug 26 15:13:16.41: [  862]: --> [2:OK]
Aug 26 15:13:16.41: [  862]: <-- [12:AT+FCLASS=1\r]
Aug 26 15:13:16.53: [  862]: --> [2:OK]
Aug 26 15:13:16.53: [  862]: DIAL 00190512776
Aug 26 15:13:16.53: [  862]: <-- [17:ATDP00190512776@\r]
Aug 26 15:13:46.03: [  862]: --> [7:CONNECT]
Aug 26 15:13:47.37: [  862]: --> [2:OK]
Aug 26 15:13:47.37: [  862]: REMOTE CSI "0"
Aug 26 15:13:47.37: [  862]: <-- [9:AT+FRH=3\r]
Aug 26 15:13:47.39: [  862]: --> [7:CONNECT]
Aug 26 15:13:47.67: [  862]: --> [2:OK]
Aug 26 15:13:47.67: [  862]: Remote is not T.4 compatible
Aug 26 15:13:47.67: [  862]: SEND FAILED: Remote is not T.4 compatible
Aug 26 15:13:47.67: [  862]: <-- [9:AT+FTH=3\r]
Aug 26 15:13:47.72: [  862]: --> [7:CONNECT]
Aug 26 15:13:47.72: [  862]: <-- data [3]
Aug 26 15:13:47.72: [  862]: <-- data [2]
Aug 26 15:13:49.04: [  862]: --> [2:OK]
Aug 26 15:13:49.04: [  862]: <-- [5:ATH0\r]
Aug 26 15:13:49.75: [  862]: --> [2:OK]
Aug 26 15:13:49.75: [  862]: SESSION END