flexfax: problems

[Franck Diard <franck@sesinc.com>]

After a long time, I give up on this problem:

My modem is contacting the fax, fax is ringing, some negociations seem
to run
and the fax resets.

HylaFAX v4.0pl2 under Linux 2.2.7 with rpm from suse package:
hylafax-v4.0pl2-56.rpm;
modem Sportster 14400 internal (functionning properly with windows
applications)

Here is the trace:

Aug 25 09:43:30.02: [ 1861]: SESSION BEGIN 00000007 99690177
Aug 25 09:43:30.02: [ 1861]: SEND FAX: JOB 12 DEST 99690177 COMMID
00000007
Aug 25 09:43:30.02: [ 1861]: MODEM set DTR OFF
Aug 25 09:43:30.02: [ 1861]: DELAY 2600 ms
Aug 25 09:43:32.62: [ 1861]: MODEM set DTR ON
Aug 25 09:43:32.62: [ 1861]: MODEM set baud rate: 19200 baud, input flow

NONE, output flow NONE
Aug 25 09:43:32.62: [ 1861]: MODEM flush i/o
Aug 25 09:43:32.62: [ 1861]: <-- [15:ATE0V1Q0S0=0H0\r]
Aug 25 09:43:32.88: [ 1861]: --> [2:OK]
Aug 25 09:43:32.88: [ 1861]: <-- [12:ATS8=2S7=60\r]
Aug 25 09:43:33.05: [ 1861]: --> [2:OK]
Aug 25 09:43:33.05: [ 1861]: <-- [12:AT+FCLASS=1\r]
Aug 25 09:43:33.10: [ 1861]: --> [2:OK]
Aug 25 09:43:33.10: [ 1861]: <-- [7:ATL0M1\r]
Aug 25 09:43:33.27: [ 1861]: --> [2:OK]
Aug 25 09:43:33.27: [ 1861]: MODEM input buffering enabled
Aug 25 09:43:33.27: [ 1861]: <-- [12:AT+FCLASS=1\r]
Aug 25 09:43:33.42: [ 1861]: --> [2:OK]
Aug 25 09:43:33.42: [ 1861]: DIAL 99690177
Aug 25 09:43:33.42: [ 1861]: <-- [13:ATDT99690177\r]
Aug 25 09:43:46.28: [ 1861]: --> [7:CONNECT]
Aug 25 09:43:46.28: [ 1861]: MODEM input buffering disabled
Aug 25 09:43:47.50: [ 1861]: --> HDLC<21:FF C0 04 00 00 A4 00 00 00 48
08 B0 00 00 02 00 54 8E 00 D9 10>
Aug 25 09:43:47.50: [ 1861]: --> [2:OK]
Aug 25 09:43:47.50: [ 1861]: <-- [9:AT+FRH=3\r]
Aug 25 09:43:47.55: [ 1861]: --> [7:CONNECT]
Aug 25 09:43:48.28: [ 1861]: --> HDLC<28:FF C0 04 00 00 A4 80 CA 72 2A
32 F2 CA 04 E2 72 A2 04 A2 4A 82 EA 2A 62 F2 CA 9D 8D>
Aug 25 09:43:48.28: [ 1861]: --> [2:OK]
Aug 25 09:43:48.28: [ 1861]: <-- [9:AT+FRH=3\r]
Aug 25 09:43:48.33: [ 1861]: --> [7:CONNECT]
Aug 25 09:43:48.98: [ 1861]: --> HDLC<25:FF C0 02 EC EC 8C 0C 04 9C 6C
9C 04 AC 8C 2C 04 04 04 04 04 04 04 04 43 89>
Aug 25 09:43:48.98: [ 1861]: --> [2:OK]
Aug 25 09:43:48.98: [ 1861]: REMOTE CSI "415 969 0177"
Aug 25 09:43:48.98: [ 1861]: <-- [9:AT+FRH=3\r]
Aug 25 09:43:49.03: [ 1861]: --> [7:CONNECT]
Aug 25 09:43:49.26: [ 1861]: --> HDLC<9:FF C8 01 00 73 15 20 EB DF>
Aug 25 09:43:49.26: [ 1861]: --> [2:OK]
Aug 25 09:43:49.26: [ 1861]: REMOTE best rate 9600 bit/s
Aug 25 09:43:49.26: [ 1861]: REMOTE max page width 1728 pixels in 215 mm

Aug 25 09:43:49.26: [ 1861]: REMOTE max unlimited page length
Aug 25 09:43:49.26: [ 1861]: REMOTE best vres 7.7 line/mm
Aug 25 09:43:49.26: [ 1861]: REMOTE best format 2-D MR
Aug 25 09:43:49.26: [ 1861]: REMOTE supports T.30 Annex A, ECM
Aug 25 09:43:49.26: [ 1861]: REMOTE best 10 ms/scanline
Aug 25 09:43:49.26: [ 1861]: USE 9600 bit/s
Aug 25 09:43:49.26: [ 1861]: USE 10 ms/scanline
Aug 25 09:43:49.26: [ 1861]: <-- [9:AT+FTH=3\r]
Aug 25 09:43:49.36: [ 1861]: --> [7:CONNECT]
Aug 25 09:43:49.36: [ 1861]: <-- HDLC<3:FF C8 DF>
Aug 25 09:43:49.36: [ 1861]: <-- data [3]
Aug 25 09:43:49.36: [ 1861]: <-- data [2]
Aug 25 09:43:50.57: [ 1861]: --> [2:OK]
Aug 25 09:43:50.93: [ 1861]: MODEM set DTR OFF
Aug 25 09:43:50.93: [ 1861]: SESSION END


Please help in finding what's wrong here. I really need this
application.

Thanks...



--
Franck Diard, Ph.D.                Senior Sofware Engineer
Software Engineering Solutions, Inc.
950 N. Rengstorff Avenue, Suite F  Mountain View, CA 94043
Tel: 650-969-0141                        Fax: 650-969-0177
http://www.sesinc.com                    franck@sesinc.com