HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

HylaFAX vs USR Courier I modem



Hi,

I am mailing about the following post to flexfax@sgi.com which was
pertaining to problems using HylaFAX with a USR Courier modem.
Basically, the problem experienced here (and by me) is that the modem
sometimes times out when sent the initial AT command by HylaFAX
(ATE0V1Q0X4S0):

>> Ingo Ciechowski wrote:
>>
>>     After adding an ATE0 command to my courier i modems configuration
(i.e.
>>     disabling the modem echo) everything's working fine now ;-))
>>
>> What do you mean exactly by "to my i modems configuration"?
>> Your original posting included the E0 command already:
>>
>>     May 10 11:49:34.41: [ 8102]: SESSION BEGIN 00000011 496732333
>>     May 10 11:49:34.42: [ 8102]: SEND FAX: JOB 1 DEST 333 COMMID
00000011
>>     May 10 11:49:34.42: [ 8102]: DELAY 2600 ms
>>     May 10 11:49:37.02: [ 8102]: <-- [17:ATE0V1Q0X4S0=0H0\r]
>>                                            ^^
>>     May 10 11:49:42.02: [ 8102]: MODEM <Timeout>
>>
>> Again, the real problem is why your modem can't see or answer
>> to the sequence "ATE0V1Q0X4S0=0H0\r"
>
>it can - at least if i connect to it manually.
>But you're right in that it still doesn't accept this setting at
session begin.
>
>However I added the ATE0 setting to the ATM0 sequence and that worked
fine
>- although beeing a workaround...

Has anyone ever discovered an alternate solution to this problem?  I am
experiencing the exact same difficulty.  Any help you can provide would
be greatly appreciated!

Regards
Andrew Vardy
Software Developer
Stratos Mobile Networks
St. John's, Newfoundland, Canada





Project hosted by iFAX Solutions